qmstech2

"Geo thermal systems heat and cool your house cheaper and better than fossil fuels will with gas going up pretty soon you would not be able to afford it. It might be costly to put one in your house initially but it will pay itself off in 3-5 years. Also there is a company called ECONAR that builds a heat pump that will cool, heat, and do 50 to 100% of your hot water heat. Fossil fuels also produce carbon dioxide when burnt, adding to the greenhouse gases and contributing to climate change."

"Natural features such as hot springs, mud pools, sinter terraces, geysers, fumaroles (steam vents) and steaming ground can be easily, and irreparably, damaged by geothermal development."

"Archaeological evidence shows that the first human use of geothermal resources in North America occurred more than 10,000 years ago with the settlement of Paleo-Indians at hot springs. The springs served as a source of warmth and cleansing, their minerals as a source of healing. While people still soak in shallow pools heated by the earth, engineers are developing technologies that will allow us to probe more than 10 miles below the earth's surface in search of geothermal energy. We invite you to study the timeline of the recent history of geothermal energy in the United States."

"You can drill a hole just about anywhere to get this abundant, high temperature geothermal energy, but the hole would be miles deep, and dry. It is possible to use that heat resource, but terribly expensive, and drilling is just the beginning of the expensive engineering problems of utilizing extremely deep geothermal energy resources."

"It may surprise you to know that the ancient Romans had central heating. They used geothermal energy - in the form of hot springs - to heat their homes. Geothermal heating wasn't used in an organized fashion since until the late 19th century when Boise, Idaho, piped in water from local hot springs to warm buildings. Now, geothermal energy is used globally. Reykjavik, Iceland, leads the world in use of geothermal energy, heating 95 percent of its buildings with heat from below the Earth's surface."

"It may surprise you to know that the ancient Romans had central heating. They used geothermal energy - in the form of hot springs - to heat their homes. Geothermal heating wasn't used in an organized fashion since until the late 19th century when Boise, Idaho, piped in water from local hot springs to warm buildings. Now, geothermal energy is used globally. Reykjavik, Iceland, leads the world in use of geothermal energy, heating 95 percent of its buildings with heat from below the Earth's surface."

" Geothermal Electricity Production Most power plants need steam to generate electricity. The steam rotates a turbine that activates a generator, which produces electricity. Many power plants still use fossil fuels to boil water for steam. Geothermal power plants, however, use steam produced from reservoirs of hot water found a couple of miles or more below the Earth's surface. There are three types of geothermal power plants: dry steam, flash steam, and binary cycle. Dry steam power plants draw from underground resources of steam. The steam is piped directly from underground wells to the power plant, where it is directed into a turbine/generator unit. There are only two known underground resources of steam in the United States: The Geysers in northern California and Yellowstone National Park in Wyoming, where there's a well-known geyser called Old Faithful. Since Yellowstone is protected from development, the only dry steam plants in the country are at The Geysers. This geothermal power plant generates electricity for the Imperial Valley in California. Credit: Warren Gretz Flash steam power plants are the most common. They use geothermal reservoirs of water with temperatures greater than 360°F (182°C). This very hot water flows up through wells in the ground under its own pressure. As it flows upward, the pressure decreases and some of the hot water boils into steam. The steam is then separated from the water and used to power a turbine/generator. Any leftover water and condensed steam are injected back into the reservoir, making this a sustainable resource. Binary cycle power plants operate on water at lower temperatures of about 225°-360°F (107°-182°C). These plants use the heat from the hot water to boil a working fluid, usually an organic compound with a low boiling point. The working fluid is vaporized in a heat exchanger and used to turn a turbine. The water is then injected back into the ground to be reheated. The water and the working fluid are

"China has also laid claims to having invented windmills around 2,000 years ago, but the first documented claims appear in the 1200's. Around 250 A.D. the Romans introduced windmills into their culture and in the 700's so did Afghanistan. The Afghanistan windmills were also of the vertical axis style and cloth sails or reed matting was developed to catch the air. These windmills were used to grind corn and sugarcane plus draw water. In the 13th century Holland started developing large horizontal axis windmills. These four-blade windmills were larger, carried more torque and wind speed and could do more work than other windmills previously designed. The Holland windmills were also being used to grind grains and to drain part of the Rhine River. In the 19th century Denmark had an estimated 2,500 windmills and in the U. S. windmills were starting to be used to pump water. The Halladay windmill of 1854 is one such example of this. The first windmill in the world built for electrical production was in 1887 in Scotland built by Professor James Blyth. A year later in 1888 in the U. S. Charles Brush of Cleveland, Ohio built a large wind turbine used to generate electricity."

"Hydrogen is the simplest of all elements with one electron and one proton. Two hydrogen atoms form one hydrogen gas molecule, or H2, but this gas is rarely found in large quantities in nature. Hydrogen's chemical properties allow it to combine easily with other elements to form other molecules"

"Today's photovoltaic systems are used to generate electricity to pump water, light up the night, activate switches, charge batteries, supply power to the utility grid, and much more. 1839: Nineteen-year-old Edmund Becquerel, a French experimental physicist, discovered the photovoltaic effect while experimenting with an electrolytic cell made up of two metal electrodes. 1873: Willoughby Smith discovered the photoconductivity of selenium. 1876: Adams and Day observed the photovoltaic effect in solid selenium. 1883: Charles Fritts, an American inventor, described the first solar cells made from selenium wafers. 1887: Heinrich Hertz discovered that ultraviolet light altered the lowest voltage capable of causing a spark to jump between two metal electrodes. 1904: Hallwachs discovered that a combination of copper and cuprous oxide was photosensitive. Einstein published his paper on the photoelectric effect. 1914: The existence of a barrier layer in PV devices was reported. 1916: Millikan provided experimental proof of the photoelectric effect. 1918: Polish scientist Czochralski developed a way to grow single-crystal silicon. 1923: Albert Einstein received the Nobel Prize for his theories explaining the photoelectric effect. 1951: A grown p-n junction enabled the production of a single-crystal cell of germanium. 1954: The PV effect in Cd was reported; primary work was performed by Rappaport, Loferski and Jenny at RCA. Bell Labs researchers Pearson, Chapin, and Fuller reported their discovery of 4.5% efficient silicon solar cells; this was raised to 6% only a few months later (by a work team including Mort Prince). Chapin, Fuller, Pearson (AT&T) submitted their results to the Journal of Applied Physics. AT&T demonstrated solar cells in Murray Hill, New Jersey, then at the National Academy of Science Meeting in Washington, DC. 1955: Western Electric began to sell commercial licenses for silicon PV technologies; early successful products included PV-powered dolla

"In geothermal energy plants, water is injected into the ground. Underground, there are areas of rock that are heated by the presence of volcanic activity, such as magma near the surface. This heats the water, which comes back out of the ground very hot. A heat exchanger cools the water, which goes back into the ground. The heat from the heat exchanger boils another pipe of water into steam. The steam spins a turbine, which is connected to a generator, which creates electricity. "

Tidal hydropower energy has various advantages. The first of these is reliability and consistency. Other alternative energy sources like wind and solar can have varying amounts of energy generated depending on the weather conditions. Tidal power energy can generate electricity by the clock and indefinitely. This means that shortages can be easily avoided. In addition, tidal turbines are efficient when it comes to generating energy. They can convert about 80 percent of the energy into electricity. Wind and solar energy generators convert much less. Of course, another great benefit of tidal power renewable energy is that it is environmentally friendly. There are no CO2 emissions that are damaging to the atmosphere or Sulfur Dioxide emissions responsible for acid rain.