Islanding phenomenon is undesirable because it leads to a safety hazard to utility service personnel and may cause damage to power generation and power supply facilities as a result of unsynchronized re-closure. In order to prevent the phenomenon, various anti-islanding methods have been studied. Until now, frequency or start phase shift methods of inverter current have much attention as active anti-islanding methods, which cause reactive power variation to the utility. However, these methods deteriorate usually the power quality like power factor or harmonic performance. This paper proposes a high power quality active anti-islanding method using effective power variation, which is implemented by periodically increasing/decreasing variation of inverter current magnitude. If it causes the large variation of inverter output voltage after islanding, active frequency drift (AFD) method as a simple anti-islanding method will be injected into the inverter current for a designed period and islanding can be detected. In case of large voltage variation when the grid is connected, AFD method will be removed after the designed period. Unlike most active anti-islanding method deteriorating power quality, the proposed method will have high performance of islanding detection and good power quality. For the verification of the proposed method, simulated results and experimental results in addition to analysis are presented using a 3 kW PV inverter.
Hans De Keulenaer on 02 Jan 08Various departments at a car manufacturing plant are suffering from regular process outages due to voltage dips. These dips are causing production losses in the Metal Operation, Spray Coating, and Assembly departments that directly affect the productivity of the plant. The cost of those losses is directly related to the profile of the voltage dip (duration and depth). Various options to reduce these costs are investigated, with particular emphasis upon the Spray Coating and Assembly departments. The following conclusions can be drawn: 1. The number and type of dips occurring at the point of connection of the plant is regular. It is similar to what is monitored at other medium voltage stations that have the same grid structure. 2. A detailed analysis of the spray coating process reveals that installing a 'restart on the fly' system on the large conditioning fans substantially reduces the related voltage dip losses. 3. A detailed analysis of the Assembly department shows that there are two main bottlenecks that determine the restart time after a dip (the 'Drive' sub-process and the 'Cockpit', 'Marking', and 'Transport chain' users). These bottlenecks can be removed by installing a Dynamic Voltage Restorer (DVR), which results in a payback time of 1.4 years. * 1 Introduction
