Group items tagged

"The light on my MimioTeach is an amber color and I can't get it to calibrate at all. Any suggestions? Answer:  Looks like you need some help with pairing your MimioHub with your MimioTeach. Here are the steps you will need to follow in order to sync these two units (Make sure your MimioHub is connected to your computer) 1. Open Mimio Settings in the software. Go to Classroom Devices. 2. You will see the MimioHub listed. (if it's not there, the MimioHub is not in a USB port) 3. Hold down the status light (button) for about 5-7 seconds. It will start flashing amber and you will see MimioTeach appear on your list of Classroom Devices. It will say "available." 4.Select the device and click Connect. 5.The Status light on the MimioTeach will turn solid green. Question sender:  Andrea C."

"Persistent showing of this progress bar may mean either that there are problems with the system's start-up arguments, or that your system contains errors that it is trying to recover from at start-up. There are a few things you can try in order to clear this problem, but before attempting to do so be sure your system is fully backed up. If this is happening because of an unrecoverable filesystem error, then you will need to format your drive. Try clearing PRAM PRAM stores start-up arguments that are passed to the kernel at boot. Generally these variables are blank, but if there is an error in the PRAM settings then resetting it may help. To reset the PRAM, reboot the system and immediately press the Option-Command-P-R keys after hearing the boot chimes. Hold them and let the system reset a couple of times, and then release them and allow the system to boot normally. You can also perform a similar operation by manually setting the boot arguments to be blank. To do this, run the following command in the Terminal: sudo nvram boot-args="" Check keyboards One possibility (albeit remote) is that your keyboard could be sending the system the command to boot to Safe Mode. Try starting your system up with the keyboard unplugged to see if it boots normally, and if so then consider replacing your keyboard. Verify or repair the disk Boot to an alternative boot volume and use Disk Utility or, more preferably, a dedicated filesystem repair tool like DiskWarrior to run disk verification and repair routines on the boot drive. Format the drive If none of the previous options clear the problem, then formatting the drive should be a final step to take to clear the problem. Be sure you have a full and restorable backup of your boot drive, and then both repartition and format the drive using the OS X installation disc. Boot to the disc, choose your language, and choose Disk Utility from the Utilities menu. Then select the drive device (it will be the item above the "Macintosh HD" name-

"Set Up Your Windows, Mac, or Linux Print Server For set up instructions, see Connect your classic printers with Google Cloud Print. The process to set up printers on Windows, Mac, and Linux print servers is identical to the directions to set up a printer attached to a Windows, Mac, or Linux computer. Networked printers print fine with Google Cloud Print, using the same setup you use to configure individual printers. If you're using a "headless" Linux print server, click here for Google Cloud Print installation instructions. Note: If you have 2-step verification enabled for your account, with step 7 in these directions, you will need to put an application-specific password in the password field instead of your regular password when you first set up Google Cloud Print. Printer Sharing You can share your printer with anybody using a Google Apps account or a Google Account. "