Group items tagged

Actually the use of the ISO is not a 'rule' actual of photography, but mostly it was a lot of discussion on of photography tutorial, that we avoid as much as possible NOISE and GRAIN on the results of our photos using ISO setting as low as possible in any lighting conditions when shooting. Use a low ISO will give the images a smooth, clean and sharp as the lighting conditions when shooting course. There are certain times in which to raise the maximum ISO setting could create some interesting photo effects, but on the other side of many of the training course on us as much as possible to use a low ISO. GRAIN or photo noise can give the feel of the sand and crude quality, and for most people it can present a different mood to the picture. It could be said that in the current era of digital of photography will be more difficult due to the efforts of digital camera vendors and try to reduce the NOISE GRAIN better when using high ISO settings. This is easily done when the film camera era, which is the film with a high ISO will result in shades of sand or Grain naturally beautiful. Another way to get GRAIN on the photographs captured using a low ISO setting, is to use software like GIMP or Photoshop, but somehow we'll be more fun to get the effect GRAIN when shooting with the camera.

Tips Avoid Blowout Caused by Flash - Do you are ever run into trouble when using the built-in Flash on the camera? Are the photos you produce 'Blow-out' and you feel a flash was too strong so that the object become over? What to do when it finds a situation like this? When we try to visit in the image share sites like flickr, there are many who experience this condition (blow-out), and indeed most of the photos were produced using a pocket camera or a Point and Shoot. Why pocket camera? Built-in Flash because pocket camera features minimal controls, either on flash power or flash light power and setting the direction of light. Unlike the External Flash on DSLR camera that can be directed to our liking. Here are some tips on using the built-in flash on the camera point and shoot or DSLR you can do: Think of Built-in Flash as your secondary light source Always position the flash as a secondary light source, surely there must when shooting ambient light is not it? Ambient light is the light that is in shooting place, such as light bulbs, solar light and others. Ambient light is important for your picture, remember that light is natural light in the location shooting. Use the flash as a light source support and never used as a primary light source, and if you are use the flash as the main light source you will see the light in the photo is artificial (artificial light). Try as much as possible to keep the ambient light or ambient light. Back one or two steps The simplest way to reduce the impact of the light coming from the flash, is to increase the distance between you and the subject of the photo. In previous articles, we have always been advised to approach the object image, but in this case if you are too close to the object will be too bright because it was hit by a flash of light coming from the camera. Many of the photographs 'blow-out' because of the distance the photographer is too close to the object image.

Indoor Wedding Photography Ideas to Get a Beautiful Picture - Questions often once there when we are shooting indoors. How to produce a good photo when shooting indoors? Camera settings which we will discuss here comes from some experience when photographing corporate events, weddings were held in the building. This setting allows you to take pictures of people or as a foreground subject, but still get the colors or the light in the background. Settings for Indoor Photography Use the camera settings in Manual mode. This setting allows you to gain full control over your digital camera settings. Set the maximum aperture eg f/4.0 or f/2.8. Set the shutter speed at 1/60, because it will be difficult to take pictures using only your hands at speeds below 1/60 sec. As a reference, do not ever shoot with a shutter speed below Focal Length size that you use when shooting using only your hands. Example: do not ever shoot with shutter speed below 1/50, if you use a 50mm prime lens and take pictures simply by using hand (without a tripod). you will need External Flash, if possible, the reflected light flash to the ceiling so that light can be more evenly distributed. Test it by shooting a couple of times and see how it works. If the image is less bright or underexposed, try raising the ISO (from 200 to 400) until you get the results you want.

One of the functions or features that will be fun in exploration is Slow Sync Flash. certainly not only fun but will produce more exciting. Options At Low Light Photography When shooting subjects in low-light conditions or low light, generally you will have two options, namely photographed using a flash or use a slow shutter speed. 1. Flash When you use the camera on AUTO mode, it will automatically select the shutter speed relatively quickly when photographing subjects with low-light conditions (low light) by using the flash. This means that your subject will have good lighting, and if the subject is moving then the movement will 'freeze' and razor-sharp results. The problem is likely you will be the subject of the photo is too bright and the background will look very dark, given at the time of the shooting there was not enough time for the camera to take a light around him. 2. Slow Shutter Speed Another option is to turn off the flash and then photographed using a longer shutter speed to let in more ambient light into the image sensor and produces well-exposed photo. This could be an effective technique, if you are photographing landscape in which all the elements in the photograph is silent, but if the subject of your photo portrait moves the course will produce a blur, of course you do not want it right? Both options above are techniques you can do, but of course they also have drawbacks. The other option is try to consider using Slow Sync Flash

What is Shutter Speed? The easiest way to describe the Shutter Speed ??is the time span or the length of the camera shutter is open. In the era of film photography, shutter can be interpreted as a time frame scenes expose the film or scene being photographed. In the era of digital photography, shutter speed means how long the camera image sensor 'Seeing' a scene or scene being photographed. Different Shutter Speed Intended use of shutter speed can be varied for different purposes. Shutter Speed ??is measured in seconds (per second), the speed represented by ordinary fractions such as 1/1000 or 1/50. You can see clearly, that the larger the denominator, the greater the speed. average speed is ideal when shooting normally 1/60, and photographed using a lower speed than that without the help of a tripod or brace will be difficult because most likely will result in a blurry photo. Setting the Shutter Speed ??common in digital cameras usually are 1/500, 1/250, 1/125, 1/60, 1/30, 1/15, 1/8, and so on, even many cameras give you the option of measurement shutter speed in seconds of full (not fragments) as 1 second, 2 seconds, 10 seconds, and so on. Second unit will be very useful in the field of low-light photography or when you are trying to capture the motion of the object. Many photographers use a shutter speed slower than 1/60 sec and that means all of their photos to be blurry. For the best results in the use of shutter speed slower then my friend should use a tripod so that the camera can be stable and there will be no shock at the time of shooting.

Learning Night Photography Techniques - Have you ever felt frustrated when shooting outdoors with low light intensity conditions at night? Do not worry you are not alone, Taking photos at night or in low light conditions is one of the most challenging photographic subjects. Learn how to make a better picture at night using 9 techniques night photography for beginners. Whatever you want to learn, whether it be photographing the night sky, find out how to paint with light or just want to know what the right camera settings for night shooting. This technique will bring a strong foundation and provide you with low-light photography and night photography Tip 1: Use a good quality file If you want the best night images should use the best image quality, and that means in RAW format. By using the RAW format, you will have a picture of 'information' that is much more complete, and it will provide a broader limits in terms of the post-shooting using Adobe Camera RAW or RAW processing software to another. RAW has many advantages when used in night shooting, as it will give you more flexibility when you want to change or editting color temperature or increase and decrease the level of exposure of the photo.

The existence of a digital sensor allows a photographer to change the ISO sensitivity represents the level sensor to light when shooting pictures. This is an advantage for those who shoot in lighting conditions change often. Bright light, dim would not be a problem, you can quickly adjust the ISO before shooting and see the results, and you certainly do not have to worry about the blur. Take advantage of the features of the camera ISO you about this. In the era of digital photography, you can forget about ISO settings and concentrate on what you take. But you do not get too excited and dismissive. AUTO ISO has its own limit. The main limiting factor is the tendency of the auto ISO camera to use ISO without consideration of the consequences they produce. As we all know, that the camera could not consider about NOISE generated, but not for lovers of our pictures, and if you care about the quality of the art that you make, chances are you're also not too happy with the NOISE in your photographs. A camera may be able to set the ISO up to 3200, but if you really want to use it every time photographing? For those who say 'No' they always consider the ISO before shooting, until the camera manufacturers provide feedback to the ISO limits are used. No one ever knew who first had the idea of ??limits on the use of ISO, but initially the cameras feature Nikon's ISO maximum use, and in the end some camera manufacturers follow them. Who first sparked this idea is not important, because now almost all camera manufacturers have added features automatic ISO usage limits to the cameras now and in the future. Many novice photographers are not aware of this feature, and they should be able to take advantage and begin to improve photo quality by not allowing too high ISO setting.

Tutorial Choosing ISO Settings - When learning about the concept of 'Exposure Triangle', maybe you have to ask 'What is the value of ISO should I use for best results? "Changing the ISO setting on your camera has an impact on the level of sensitivity of the image sensor in the camera to the LIGHT. The lower ISO number that you choose the level of light sensitivity will also be lower, and vice versa the higher the ISO number then the camera's image sensor will be more sensitive.The setting above is useful when you are shooting in conditions or different lighting situations, usually when the lighting conditions are low and you are not allowed to use a flash (in this case you have to raise the ISO). The impact is most noticeable when raising the ISO setting is likely GRAIN or NOISE the results of the photo will also increase. you may not be aware of GRAIN in the photo when I saw on the camera LCD, but when you want to review again in the Personal Computer the NOISE or GRAIN will be clearly visible. Above is an example where when photographing all using the same camera settings except for ISO settings (100 and 1600). The basic rule is to use the ISO, you must select the ISO as low as possible to get the photo smooth and free of GRAIN.

When The Right Time Using P, S, A, M Mode on The Camera? - Aperture Priority (A) is effectively used for photographing a stationary object, for example, landscape (except slow speed), interior or still life. In A mode, you can set the aperture to get the depth of field as desired, and the camera will adjust its speed. Speed ??Priority (S) is very effective for photographing moving subjects such as waterfalls, sports and panning. With this mode, you can specify the shutter speed to create the effect of moving as desired, and the camera will determine the appropriate aperture for you. Manual (M). Although the cameras already have very sophisticated metering systems, but can also occur sometimes measurement errors, especially in difficult conditions such as event staging. To get the 'fix' a photographer who has had flight hours will determine the ISO speed, shutter speed and aperture for the shooting was his. Manual mode is also often used for studio shooting where lighting is measured by the flash meter. Program (P) mode is most often used to create photo coverage, where the priorities are the moments that move very fast and will not be repeated. In this mode, the camera is in full control, and you only have to shoot it.

Tutorial Built in Flash Photography - Have you ever met a photographer who was really anti-Flash? We see a lot of either in person or read in books, websites, forums. those who prefer and tend to raise the ISO on the camera settings instead of using the camera flash. We basically agree that use of the camera flash photography will cause the image 'blown-out' and is due to the flash light is too harsh, but there are times when flash will be very effective in creating a photograph, of course, if used correctly. Flash photography can be done in camera with a hotshoe, flash bracket or off camera, and it is undeniable that most of us many not ignore the presence of a camera flash, and rarely use it. 99% of the camera on the market has flash built-in, so at least let's learn how to get the best results to produce a good photograph, and here are some tips you can do:

Tutorial Auto Mode on Camera Digital - Some time ago there was an interesting question. The question was something like this: "I have been a long time tried to use Manual mode to learn photography, but the results are far from expectations. Existing solutions? ". If you learn photography, and you are learning to use a DSLR camera using Manual mode feel so scary, so this time we will be a little review tips is usually done when learning to use the manual. Let the Auto camera settings to guide you, the AUTO setting is set in such a way as to certain conditions such as Portrait, Macro, Sports, Landscape, etc. For example, use the Sports mode. At Canon 500D camera in the room, we get the settings: f/3.5, 1/230 sec, ISO auto.

Ram Cleaner New Speed Booster: Best Junk cleaner is your handy doctor for your smartphones. This ram cleaner for android will solve all your memory, junk files and speed problems. Auto ram cleaner speed booster automatically clear ram when mobile apps on in your android phones. This Ram Cleaner New Speed Booster: Best Junk cleaner cannot use only as 64gb storage space cleaner 64 gb ram expander but you can use it as every mobile ram and junk files and catch phone memory cleaner.Ram Cleaner New Speed Booster: Best Junk cleaner is an auto memory cleaner. It means that if you have opened a lot of different apps, games or files in your mobile, and you forget to close. So if your mobile have this 1 tap ram cleaner. Then don't worry. This doctor ram cleaner speed booster 2018 will take care of your mobile. This one touch ram cleaner or auto ram cleaner 2018 will close all those apps and files which have occupy a lot of memory and is un used. After using this cleaner and booster for android you Will surely share this disk cleaner as world best android mobile ram cleaner software to your friends. So Download this best junk ram and cache cleaner for android and enjoy your boar mobile using.

Best Wedding Photography Techniques For Beginner - Have you ever been in a position like this: Entering a new world of photography and got an offer for the first time photographing a wedding? In the heart must feel a little confused and looking for tips on how to capture a moment that marriage is so sacred and important for the wedding couple. This article is a continuation of the article you are looking for wedding photography techniques.Jika technical explanation, then you will not find it in this article, we will assume that you already understand the basics of photography like the concept of exposure triangle, base composition, and others. Learn How to Manipulate Light. The ability to reflect or scatter (diffuse) light flash is key in Wedding Photography. you will definitely see a lot of weddings in the building's lower lighting conditions, if you are allowed to be use flash (some places like the church does not allow) see if it is possible to reflect light flash into the ceiling? (remember that the reflected light flash on the wall with colored surface will change the color of your photograph), or consider also using flash light diffuser to be softer. The building does not allow the use of wedding flash? then you at least use a fast lens with a wide aperture or raise the ISO setting. A lens that features image stabilization (IS / VR) would be helpful.

How To Hold a Camera When Photographing - How to hold a digital camera when taking pictures is one of the key factors that determine the level of sharpness and focus of the photos you took. The main reason why is the creation of photo blur due to camera shake. Usually caused by camera shake and how to hold your body position is wrong when the shutter button is pressed. Camera Shake or camera shake often occurs when shooting in low-light conditions (low light) as well as the use of slow shutter speed.

The position holds true digital camera can help you to minimize or even prevent camera shake, and is certain to result in a sharp blur-free photo. Know and understand how to hold the camera the correct position is considered very important to produce good photographs.

Methods of Holding Position Digital Camera
How my friend holding the camera or photographic device usage is actually just individual taste problems, and there is no right and wrong, but to build a habit and determine the proper attitude when shooting from the beginning will give many advantages to you in the future. At least my friend will be seen as a professional photographer when shooting, at least it's a good reason to try it? Here are some tips you can do buddy:

Hold the camera using the right hand to grasp the handle right side of the camera, and place your thumb on the back of the camera, three fingers pointing forward and curled index finger rests on the shutter button. Digital cameras are now mostly well-grip shape that automatically leads Three position where your fingers should be. Hold your digital camera with a strong but not too strong if you do not want to result in blurry photos. The position of the left hand can vary depending on the type of digital camera you have, if my friend using a DSLR camera, then your left hand should be under the weight of the camera with the goal of cameras using the palm of the hand. Thumb and index finger

Notes: Exposure - The light meter is different from the exposure setting. - Keeping your light meter at "0" doesn't necessarily mean it's the perfect setting. Just don't stray too far from the "0". Adjust to your liking. - Positive numbers on your exposure setting will make your photos brighter. - Negative numbers make your photos darker. Aperture - Small numbers (like f/1.4) have larger openings, which let in more light. - Big numbers (like f/16) have smaller openings, which let in less light. Shutter Speed - Seeing 100, 250, 320, etc. on your viewfinder means "1/(number seen)", like "1/100". - Try not to use 1/60 or less when handheld, that's when you use a tripod or look for something steady. - Using longer exposure (slow shutter speed) will let in more light. - Using shorter exposure (fast shutter speed) will let in less light. ISO - ISO is the sensitivity of your camera to light - Lower numbers are less sensitive to light, which give smoother photos. - Higher numbers are very sensitive to light, which give very grainy and noisy photos.

There may be times when you want to play around with some elements in your images. Perhaps you want to change a color to a more suitable one in post-processing. One of the tools you can use in Photoshop is the Channel Mixer. It is a simple process that allows you to change the color of any element in your image to any other color under the rainbow. The Channel Mixer adjustment is widely used for making good black and white image conversions, correcting color casts, and exaggerating color. But why not use it for fun too, such as changing the color completely!

This time we will discuss some basic shooting modes are owned by the digital cameras in general (be it a DSLR or compact cameras). This information can be said is the basic techniques in photography in particular the use of a camera, but we hope this article is useful for those of you who are starting photography world, and began to eksplore shooting modes other than auto. AUTO mode We think not need to talk about the AUTO mode setting (automatic), considering almost all digital cameras have this feature. AUTO Mode instruct the camera to use the 'judgment' in deciding the best Shutter Speed??, Aperture, ISO, White Balance, Focus and flash to get the best results. Some digital cameras still provide control of the flash and Red Eye Reduction in the AUTO setting. Mode settings would provide relatively good results in most circumstances, but keep in mind you need to tell the camera additional information about the type of shots to be taken, so that the images can be in accordance with what you want. Referring to the statement, the following are some modes the automatic camera settings on the camera can give instructions about the photo you want.

While deep in the Ochoco Mountains we ran across a nice flowing creek. I love running water and just had to stop!! Upon inspection of where we were it was obvious this spot had been used as a hunting camp. The legs of the elk and the "meat hangers" (we laughed for I am sure there is a real name for them ha) , that were nailed to the trees. The feathers laying around looked as if maybe a turkey was in the mix with the elk? Even a spot for a bathroom. Gave us this impression. Guy wondered further down the creek then I for things happen to catch my eye. So I was wondering around on my own taking shots of the ice that was found where the water was not running fast. As I was doing my thing I heard some racket that was obviously coming from the trees and from birds. As you can imagine wild creatures do not just sit still so one can snap off photographs, so off I went to get this loud birds photographs! There were at least 3 of these birds, however non of them were all that impressed with any of us there! From the information I gathered of this bird, these must of been truly wild Gray Jays!! Not yet ingrained with human presents. I first thought this was a nutcracker. We have many of those around so it seams. Same family as these Gray Jays, but so is the steller's jay,blue jay and the western scrub jay , the crows, the ravens there is a lot of species in the Corvidae family!! From the sub species of the Gray Jay and getting these photographs in the Ochoco mountains this determined these to be the Bicolored Gray Jay. One thing all these birds have in common is, they are very smart!! Smarter then humans give them credit for! Over the Cascade Mountains there is yet another sub species of the Gray Jay over there with different needs and habits. That Gray Jay does not like snow, the ones here better like snow! Like all birds of the Corvidae family, they are pretty much scavengers, however it appears all the species of the Gray Jay have different food s

Do you feel confused while deciding how to choose the right things which makes your home just the best home in the world. There are very basic things which will decide the outcome of your efforts and we will list them down for you here. Walls color and High Contrast: Go for white color for the entire room and put a decorative piece like painting or statue with high saturated color to stand out in the entire room. What we are going to tell you now is not rocket science. White color makes small rooms look big. Also, what is important is to know whether that room will have ample sunlight or not. If one had carefully watched how colors play magic during sunset and sunrise; they would know that blue, violet, red, orange and yellow are the main ingredients to bring up those amazing combinations. Rooms with less sunlight, we recommend brighter shades of yellowish orange. The dark rooms will then be illuminated using violet- bluish lights to bring up the same magic. We recommend that if you buy paintings which are red colored for decorating room, then don't opt of statues which are blue. Go for Red vases as centerpieces and while doing that, you would be setting up a room which is high on contrast but still not overburdened with all the colors in the world. Focused Lights on main paintings: Lights are one of the most important factors to keep in mind before undertaking any sort of interior designing/re-designing. As we have discussed earlier, the shades and the extent of lighting required will depend on the amount of natural light which is available in the room. We recommend controlled lighting which can be scaled up and down as per the requirement during various times of day and night. We recommend using contrasting lights which means that on blue or purple walls, use lights which are red, orange or red yellowish in nature but use blue or purple lights on bright walls. The key to choose the right lighting is to consider the size and style of the room. Some of the import