Group items tagged

You may also Apply a Standard or Basic theme from the previous window. The Standard Windows 7 theme is more preferred as its gives a neutral look than the classy windows old theme.

Right click on ” Computer” and select “Properties” from the right click menu. Click on ” Advanced System Settings ” from the left pane to open up the ” System Properties ” window. Select the “Advanced” tab from it. Then Under ” Performance ” click ” Settings “. Choose ” Custom: ” Options From it. Now un tick all the options (Choose “Adjust for best performance“) and select only the last four options (actually three are preferable  you may un- tick the second option out of the last four). Take a look at the screen shot below.

Open up ” Programs and Features ” from Control Panel. Click the ” Turn Windows features on or off ” from the left pane. Now uncheck all the Feature that you don’t use in Windows 7 and restart the system for the changes to take effect.

If you’ve got a new ssd for your system, then you’d definitely consider checking out this guide which explains 9 tweaks to properly speed up, optimize your ssd and prolong the life of your ssd, while getting the best performance from it.

Right click on the sidebar and choose ” Properties “. On the properties windows untick the check box showing ” Start sidebar when Windows Starts “ From now on windows sidebar won’t start when windows 7 start up.

Aero Snap will help you to maximize, minimize and resize the windows just by dragging and dropping it into the screen corners. I dont advice to turn it off as the Aero Snap feature really helps to speed up working with windows by arranging them side by side. But, if you are not a regular user of the same, you may proceed by turning of aero snap in windows 7. Open the Windows 7 ” Control Panel ” and double-click on ” Ease of Access Center ” icon. Now click on the ” Make it easier to focus on tasks ” seen at the bottom in there Now untick the check box saying ” Prevent windows from being automatically arranged when moved to the edge of the screen ” . Right click on the Windows 7 taskbar and select ” Properties “. Now untick the ” Use Aero Peek to preview the desktop ” option from there. That will now disable the Aero Snap in Windows 7.

The Aero Peek feature in Windows 7 helps you to peek through all open windows by hiding all other windows and showing only the outlines of all windows. Aero Peek is similar to the ” Show Desktop ” Feature in XP and Vista. If you have followed step 3 then Aero Peek will be automatically disabled. If not, Right Click the Taskbar and choose Properties. Un-select the ”Use Aero Peek to preview the desktop” option. The aero peek feature will now be disabled in windows 7.

Double click the ” Power Options ” in the Control panel. Click the down arrow showing ” Show Additional Plans ” to see the ” High Performance ” power plan.

Now just activate the ” High Performance ” plan and that’s it. You may go for the advanced settings for further tweaking if you want.

For disabling thumbnails in Windows 7, Double Click on ” Computer ” >click on the “Organize” drop-down menu and select the “Folder and Search options” Under ‘Files and Folders’ section, go to the “View” tab and tick the check box showing “Always show icons, never thumbnails” checkbox.

To Disable The Screen Saver and Wallpaper in Windows 7, Right click on desktop and choose “Personalize”. Click the Screen Saver link ” From the Screen Saver drop down menu, Set it to “None” and click “Apply” and then “OK”. Now click on “Desktop Background” link. From the “Location” drop down menu select “Solid Colors” and pick one color and click “OK”.

Type ” msconfig ” in the “RUN” option from start menu press [Enter] to open up the System Configuration Utility. Now navigate to the “StartUp” tab. Untick the Entries which are not needed

To disable the system sounds in Windows 7, Type mmsys.cpl in RUN From the Windows 7 Startmenu search box and press [Enter]. Navigate to the “Sounds” tab. Now from under “Sound Scheme:” select “No Sounds” > Click “Apply” > “OK”.

Begin the process by downloading Fancy Cache (~2MB) software. After installation and starting up the program, the software interface would list out the storage mediums connected to your pc. Select your SSD from the list and configure a cache size for it (Refer the image). The cache size may be set to suit your needs. We’ve allocated currently 3192 MB of RAM as the cache and the defer caching has been also set to enabled. After setting the cache size for your SSD and related options on fancy cache, click Start Caching and you’re ready with the caching setup for your SSD.

The TRIM Command The very first step after setting up an SSD is to enable the TRIM Command in Windows. Windows 8 has the TRIM command already enabled if you are using an SSD. It is important to have the TRIM command enabled on your system as it helps to maintain the SSD’s life by optimizing the garbage collection in windows.

3) Enabling TRIM Command to Optimize SSD From the Start Menu, type CMD in the search box. Right click the command prompt icon and choose Run as Administrator. Now type fsutil behavior query disabledeletenotify and press Enter. If its shows you disabledeletenotify = 0, the TRIM command is enabled in windows and you don’t have to make any modifications. If not, it would display, disabledeletenotify = 1. If TRIM is not enabled, type fsutil behavior set disabledeletenotify 0 The TRIM Command would now be set to enabled.

Drive defragmentation helps in organizing the fragmented data and helps in improving the performance of a hard disk. But drive defragmentation doesn’t speed up SSD, as these drives doesn’t contain any rotating parts and defragmenting a drive would involve the transfer of data i.e. more read/write cycles which actually shortens the life span of the SSD. So, its always good to disable drive defragmentation in windows.

So its better to disable them if you have 4GB or less memory. If you have plenty of RAM installed, enabling them might give an iota of boost and would speed up SSD performance.

Bring up the Registry Editor in Windows by Typing regedit on RUN Window (WIN + R) and pressing Enter. Now navigate to “HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSessionManagerMemory ManagementPrefetchParameters“ You’ll see Enable Prefetcher and Enable Superfetch options being list out on the right window pane. Double click each and set the value from 3 to 0. Now restart your system for the changes to be enabled.

SSDs are speedier than hard drives and have an access time of 0.1 milli second. Drive indexing results in increasing the number of file write operations doesn’t really speed up SSD and its better to have it turned off. Open My Computer and just right Click Your SSD and choose properties. Just untick the Allow files on this drive to have contents indexed in addition to file properties option. You’ll be prompted with warnings just after clicking Apply. Proceed by pressing Ignore All and it would show you a processing window and would take a few minutes for the changes to be applied.

Now Stacker is purposely built for the sheet-based UI that we have. It knows about sheet nesting, how to break out of a sheet chain, and more.

Stacker can only make things appear so fast. If actions still take 500ms to render, it’s not going to have that ultra snappy feel that Basecamp Next does. To get that sensation, your requests need to take less than 100ms. Once our caches are warm, many of our requests take less than 50ms and some even less than 20ms.

The only way we can get complex pages to take less than 50ms is to make liberal use of caching.

This is illustrated in the picture above. If I change todo #45, I’ll have to bust the cache for the todo, the cache for the list, the cache for all todolists, and the cache for the page itself. That sounds terrible on the surface until you realize that everything else is cached as well and can be reused.

To improve the likelihood that you’re always going to hit a warm cache, we’re reusing the cached pieces all over the place. There’s one canonical template for each piece of data and we reuse that template in every spot that piece of data could appear.

Now this is often quite easy. A todo looks the same regardless of where it appears. Here’s the same todo appearing in three different pages all being pulled from the same cache:

This is where a sprinkle of JavaScript comes handy. Instead of embedding the logic in the generation of the template, you decorate it after the fact with JavaScript. The block below shows how that happens.

It’s a cached list of possible recipients of a new message on a given project, but my name is not in it, even though it’s in the cache. That’s because each checkbox is decorated with a data-subscriber-id HTML attribute that corresponds to their user id. The JavaScript reads a cookie that contains the current user’s id, finds the element with a matching data-subscriber-id, and removes it from the DOM. Now all users can share the same user list for notification without seeing their own name on the list.

None of these techniques in isolation are enough to produce the super snappy page loads we’ve achieved with Basecamp Next, but in combination they get there.

This unavoidable tradeoff between false positive and false negative errors is a well-known property of all statistical-prediction applications. Circling back to check all the factors involved in the problem might have helped the authors avoid this mistake.

How could an experienced journalist and a widely respected researcher slip up in so many ways? Some possible answers to this question offer insights for the would-be pop-statistics writer.