Skip to main content

Home/ Larvata/ Group items tagged port

Rss Feed Group items tagged

Filter: All | Bookmarks | Topics Simple Middle
張 旭

Service | Kubernetes - 0 views

kubernetes.io/...service

kubernetes networking service ingress

shared by 張 旭 on 14 Apr 21 - No Cached
  • Each Pod gets its own IP address
  • Pods are nonpermanent resources.
  • Kubernetes Pods are created and destroyed to match the state of your cluster
  • ...23 more annotations...
  • In Kubernetes, a Service is an abstraction which defines a logical set of Pods and a policy by which to access them (sometimes this pattern is called a micro-service).
  • The set of Pods targeted by a Service is usually determined by a selector
  • If you're able to use Kubernetes APIs for service discovery in your application, you can query the API server for Endpoints, that get updated whenever the set of Pods in a Service changes.
  • A Service in Kubernetes is a REST object, similar to a Pod.
  • The name of a Service object must be a valid DNS label name
  • Kubernetes assigns this Service an IP address (sometimes called the "cluster IP"), which is used by the Service proxies
  • A Service can map any incoming port to a targetPort. By default and for convenience, the targetPort is set to the same value as the port field.
  • The default protocol for Services is TCP
  • As many Services need to expose more than one port, Kubernetes supports multiple port definitions on a Service object. Each port definition can have the same protocol, or a different one.
  • Because this Service has no selector, the corresponding Endpoints object is not created automatically. You can manually map the Service to the network address and port where it's running, by adding an Endpoints object manually
  • Endpoint IP addresses cannot be the cluster IPs of other Kubernetes Services
  • Kubernetes ServiceTypes allow you to specify what kind of Service you want. The default is ClusterIP
  • ClusterIP: Exposes the Service on a cluster-internal IP.
  • NodePort: Exposes the Service on each Node's IP at a static port (the NodePort). A ClusterIP Service, to which the NodePort Service routes, is automatically created. You'll be able to contact the NodePort Service, from outside the cluster, by requesting <NodeIP>:<NodePort>.
  • LoadBalancer: Exposes the Service externally using a cloud provider's load balancer
  • ExternalName: Maps the Service to the contents of the externalName field (e.g. foo.bar.example.com), by returning a CNAME record with its value. No proxying of any kind is set up.
  • You can also use Ingress to expose your Service. Ingress is not a Service type, but it acts as the entry point for your cluster.
  • If you set the type field to NodePort, the Kubernetes control plane allocates a port from a range specified by --service-node-port-range flag (default: 30000-32767).
  • The default for --nodeport-addresses is an empty list. This means that kube-proxy should consider all available network interfaces for NodePort.
  • you need to take care of possible port collisions yourself. You also have to use a valid port number, one that's inside the range configured for NodePort use.
  • Service is visible as <NodeIP>:spec.ports[*].nodePort and .spec.clusterIP:spec.ports[*].port
  • Choosing this value makes the Service only reachable from within the cluster.
  • NodePort: Exposes the Service on each Node's IP at a static port
張 旭

Deploy services to a swarm | Docker Documentation - 0 views

docs.docker.com/...services

docker swarm system

shared by 張 旭 on 07 Sep 18 - No Cached
  • Swarm services use a declarative model, which means that you define the desired state of the service, and rely upon Docker to maintain this state.
  • To create a single-replica service with no extra configuration, you only need to supply the image name.
  • A service can be in a pending state if its image is unavailable
  • ...12 more annotations...
  • If your image is available on a private registry which requires login, use the --with-registry-auth flag
  • When you update a service, Docker stops its containers and restarts them with the new configuration.
  • When updating an existing service, the flag is --publish-add. There is also a --publish-rm flag to remove a port that was previously published.
  • To update the command an existing service runs, you can use the --args flag.
  • force the service to use a specific version of the image
  • If the manager can’t resolve the tag to a digest, each worker node is responsible for resolving the tag to a digest, and different nodes may use different versions of the image.
  • After you create a service, its image is never updated unless you explicitly run docker service update with the --image flag as described below.
  • When you run service update with the --image flag, the swarm manager queries Docker Hub or your private Docker registry for the digest the tag currently points to and updates the service tasks to use that digest.
  • You can publish a service task’s port directly on the swarm node where that service is running.
  • You can rely on the routing mesh. When you publish a service port, the swarm makes the service accessible at the target port on every node, regardless of whether there is a task for the service running on that node or not.
  • To publish a service’s ports externally to the swarm, use the --publish <PUBLISHED-PORT>:<SERVICE-PORT> flag.
  • published port on every swarm node
張 旭

Cluster Networking - Kubernetes - 0 views

kubernetes.io/...networking

kubernetes networking network system

shared by 張 旭 on 08 Jul 19 - No Cached
  • Networking is a central part of Kubernetes, but it can be challenging to understand exactly how it is expected to work
  • Highly-coupled container-to-container communications
  • Pod-to-Pod communications
  • ...57 more annotations...
  • this is the primary focus of this document
    • 張 旭
      張 旭 on 27 Aug 21
       
      Cluster Networking 所關注處理的是： Pod 到 Pod 之間的連線
  • Pod-to-Service communications
  • External-to-Service communications
  • Kubernetes is all about sharing machines between applications.
  • sharing machines requires ensuring that two applications do not try to use the same ports.
  • Dynamic port allocation brings a lot of complications to the system
  • Every Pod gets its own IP address
  • do not need to explicitly create links between Pods
  • almost never need to deal with mapping container ports to host ports.
  • Pods can be treated much like VMs or physical hosts from the perspectives of port allocation, naming, service discovery, load balancing, application configuration, and migration.
  • pods on a node can communicate with all pods on all nodes without NAT
  • agents on a node (e.g. system daemons, kubelet) can communicate with all pods on that node
  • pods in the host network of a node can communicate with all pods on all nodes without NAT
  • If your job previously ran in a VM, your VM had an IP and could talk to other VMs in your project. This is the same basic model.
  • containers within a Pod share their network namespaces - including their IP address
  • containers within a Pod can all reach each other’s ports on localhost
  • containers within a Pod must coordinate port usage
  • “IP-per-pod” model.
  • request ports on the Node itself which forward to your Pod (called host ports), but this is a very niche operation
  • The Pod itself is blind to the existence or non-existence of host ports.
  • AOS is an Intent-Based Networking system that creates and manages complex datacenter environments from a simple integrated platform.
  • Cisco Application Centric Infrastructure offers an integrated overlay and underlay SDN solution that supports containers, virtual machines, and bare metal servers.
  • AOS Reference Design currently supports Layer-3 connected hosts that eliminate legacy Layer-2 switching problems.
  • The AWS VPC CNI offers integrated AWS Virtual Private Cloud (VPC) networking for Kubernetes clusters.
  • users can apply existing AWS VPC networking and security best practices for building Kubernetes clusters.
  • Using this CNI plugin allows Kubernetes pods to have the same IP address inside the pod as they do on the VPC network.
  • The CNI allocates AWS Elastic Networking Interfaces (ENIs) to each Kubernetes node and using the secondary IP range from each ENI for pods on the node.
  • Big Cloud Fabric is a cloud native networking architecture, designed to run Kubernetes in private cloud/on-premises environments.
  • Cilium is L7/HTTP aware and can enforce network policies on L3-L7 using an identity based security model that is decoupled from network addressing.
  • CNI-Genie is a CNI plugin that enables Kubernetes to simultaneously have access to different implementations of the Kubernetes network model in runtime.
  • CNI-Genie also supports assigning multiple IP addresses to a pod, each from a different CNI plugin.
  • cni-ipvlan-vpc-k8s contains a set of CNI and IPAM plugins to provide a simple, host-local, low latency, high throughput, and compliant networking stack for Kubernetes within Amazon Virtual Private Cloud (VPC) environments by making use of Amazon Elastic Network Interfaces (ENI) and binding AWS-managed IPs into Pods using the Linux kernel’s IPvlan driver in L2 mode.
  • to be straightforward to configure and deploy within a VPC
  • Contiv provides configurable networking
  • Contrail, based on Tungsten Fabric, is a truly open, multi-cloud network virtualization and policy management platform.
  • DANM is a networking solution for telco workloads running in a Kubernetes cluster.
  • Flannel is a very simple overlay network that satisfies the Kubernetes requirements.
  • Any traffic bound for that subnet will be routed directly to the VM by the GCE network fabric.
  • sysctl net.ipv4.ip_forward=1
  • Jaguar provides overlay network using vxlan and Jaguar CNIPlugin provides one IP address per pod.
  • Knitter is a network solution which supports multiple networking in Kubernetes.
  • Kube-OVN is an OVN-based kubernetes network fabric for enterprises.
  • Kube-router provides a Linux LVS/IPVS-based service proxy, a Linux kernel forwarding-based pod-to-pod networking solution with no overlays, and iptables/ipset-based network policy enforcer.
  • If you have a “dumb” L2 network, such as a simple switch in a “bare-metal” environment, you should be able to do something similar to the above GCE setup.
  • Multus is a Multi CNI plugin to support the Multi Networking feature in Kubernetes using CRD based network objects in Kubernetes.
  • NSX-T can provide network virtualization for a multi-cloud and multi-hypervisor environment and is focused on emerging application frameworks and architectures that have heterogeneous endpoints and technology stacks.
  • NSX-T Container Plug-in (NCP) provides integration between NSX-T and container orchestrators such as Kubernetes
  • Nuage uses the open source Open vSwitch for the data plane along with a feature rich SDN Controller built on open standards.
  • OpenVSwitch is a somewhat more mature but also complicated way to build an overlay network
  • OVN is an opensource network virtualization solution developed by the Open vSwitch community.
  • Project Calico is an open source container networking provider and network policy engine.
  • Calico provides a highly scalable networking and network policy solution for connecting Kubernetes pods based on the same IP networking principles as the internet
  • Calico can be deployed without encapsulation or overlays to provide high-performance, high-scale data center networking.
  • Calico can also be run in policy enforcement mode in conjunction with other networking solutions such as Flannel, aka canal, or native GCE, AWS or Azure networking.
  • Romana is an open source network and security automation solution that lets you deploy Kubernetes without an overlay network
  • Weave Net runs as a CNI plug-in or stand-alone. In either version, it doesn’t require any configuration or extra code to run, and in both cases, the network provides one IP address per pod - as is standard for Kubernetes.
  • The network model is implemented by the container runtime on each node.
張 旭

chaifeng/ufw-docker: To fix the Docker and UFW security flaw without disabling iptables - 0 views

github.com/ufw-docker

iptables docker

shared by 張 旭 on 13 Jul 22 - No Cached
  • It requires to disable docker's iptables function first, but this also means that we give up docker's network management function.
  • This causes containers will not be able to access the external network.
  • such as -A POSTROUTING ! -o docker0 -s 172.17.0.0/16 -j MASQUERADE. But this only allows containers that belong to network 172.17.0.0/16 can access outside.
  • ...13 more annotations...
  • Don't need to disable Docker's iptables and let Docker to manage it's network.
  • The public network cannot access ports that published by Docker.
  • In a very convenient way to allow/deny public networks to access container ports without additional software and extra configurations
  • Enable Docker's iptables feature. Remove all changes like --iptables=false , including configuration file /etc/docker/daemon.json
  • Modify the UFW configuration file /etc/ufw/after.rules
  • There may be some unknown reasons cause the UFW rules will not take effect after restart UFW, please reboot servers.
  • If we publish a port by using option -p 8080:80, we should use the container port 80, not the host port 8080
  • allow the private networks to be able to visit each other.
  • The following rules block connection requests initiated by all public networks, but allow internal networks to access external networks.
  • Since the UDP protocol is stateless, it is not possible to block the handshake signal that initiates the connection request as TCP does.
  • For GNU/Linux we can find the local port range in the file /proc/sys/net/ipv4/ip_local_port_range. The default range is 32768 60999
  • It not only exposes ports of containers but also exposes ports of the host.
  • Cannot expose services running on hosts and containers at the same time by the same command.
  • 張 旭 on 13 Jul 22
     
    "It requires to disable docker's iptables function first, but this also means that we give up docker's network management function."
張 旭

Use swarm mode routing mesh | Docker Documentation - 0 views

docs.docker.com/...ingress

docker swarm cluster system server HA networking

shared by 張 旭 on 16 Jun 17 - No Cached
  • Docker Engine swarm mode makes it easy to publish ports for services to make them available to resources outside the swarm.
  • All nodes participate in an ingress routing mesh.
  • routing mesh enables each node in the swarm to accept connections on published ports for any service running in the swarm, even if there’s no task running on the node.
  • ...6 more annotations...
  • Port 7946 TCP/UDP for container network discovery
  • Port 4789 UDP for the container ingress network.
  • When you access port 8080 on any node, the swarm load balancer routes your request to an active container.
  • The routing mesh listens on the published port for any IP address assigned to the node.
  • publish a port for an existing service
  • To use an external load balancer without the routing mesh, set --endpoint-mode to dnsrr instead of the default value of vip
張 旭

Outbound connections in Azure | Microsoft Docs - 0 views

docs.microsoft.com/...-balancer-outbound-connections

microsoft azure networking network

shared by 張 旭 on 15 Jul 19 - No Cached
  • When an instance initiates an outbound flow to a destination in the public IP address space, Azure dynamically maps the private IP address to a public IP address.
  • After this mapping is created, return traffic for this outbound originated flow can also reach the private IP address where the flow originated.
  • Azure uses source network address translation (SNAT) to perform this function
  • ...22 more annotations...
  • When multiple private IP addresses are masquerading behind a single public IP address, Azure uses port address translation (PAT) to masquerade private IP addresses.
  • If you want outbound connectivity when working with Standard SKUs, you must explicitly define it either with Standard Public IP addresses or Standard public Load Balancer.
  • the VM is part of a public Load Balancer backend pool. The VM does not have a public IP address assigned to it.
  • The Load Balancer resource must be configured with a load balancer rule to create a link between the public IP frontend with the backend pool.
  • VM has an Instance Level Public IP (ILPIP) assigned to it. As far as outbound connections are concerned, it doesn't matter whether the VM is load balanced or not.
  • When an ILPIP is used, the VM uses the ILPIP for all outbound flows.
  • A public IP assigned to a VM is a 1:1 relationship (rather than 1: many) and implemented as a stateless 1:1 NAT.
  • Port masquerading (PAT) is not used, and the VM has all ephemeral ports available for use.
  • When the load-balanced VM creates an outbound flow, Azure translates the private source IP address of the outbound flow to the public IP address of the public Load Balancer frontend.
  • Azure uses SNAT to perform this function. Azure also uses PAT to masquerade multiple private IP addresses behind a public IP address.
  • Ephemeral ports of the load balancer's public IP address frontend are used to distinguish individual flows originated by the VM.
  • When multiple public IP addresses are associated with Load Balancer Basic, any of these public IP addresses are a candidate for outbound flows, and one is selected at random.
  • the VM is not part of a public Load Balancer pool (and not part of an internal Standard Load Balancer pool) and does not have an ILPIP address assigned to it.
  • The public IP address used for this outbound flow is not configurable and does not count against the subscription's public IP resource limit.
  • Do not use this scenario for whitelisting IP addresses.
  • This public IP address does not belong to you and cannot be reserved.
  • Standard Load Balancer uses all candidates for outbound flows at the same time when multiple (public) IP frontends is present.
  • Load Balancer Basic chooses a single frontend to be used for outbound flows when multiple (public) IP frontends are candidates for outbound flows.
  • the disableOutboundSnat option defaults to false and signifies that this rule programs outbound SNAT for the associated VMs in the backend pool of the load balancing rule.
  • Port masquerading SNAT (PAT)
  • Ephemeral port preallocation for port masquerading SNAT (PAT)
  • determine the public source IP address of an outbound connection.
張 旭

Understanding Nginx Server and Location Block Selection Algorithms | DigitalOcean - 0 views

www.digitalocean.com/...ion-block-selection-algorithms

web server nginx config

shared by 張 旭 on 03 Feb 20 - No Cached
  • A server block is a subset of Nginx’s configuration that defines a virtual server used to handle requests of a defined type. Administrators often configure multiple server blocks and decide which block should handle which connection based on the requested domain name, port, and IP address.
  • A location block lives within a server block and is used to define how Nginx should handle requests for different resources and URIs for the parent server. The URI space can be subdivided in whatever way the administrator likes using these blocks. It is an extremely flexible model.
  • Nginx logically divides the configurations meant to serve different content into blocks, which live in a hierarchical structure. Each time a client request is made, Nginx begins a process of determining which configuration blocks should be used to handle the request.
  • ...37 more annotations...
  • Nginx is one of the most popular web servers in the world. It can successfully handle high loads with many concurrent client connections, and can easily function as a web server, a mail server, or a reverse proxy server.
  • The main server block directives that Nginx is concerned with during this process are the listen directive, and the server_name directive.
  • The listen directive typically defines which IP address and port that the server block will respond to.
  • 0.0.0.0:8080 if Nginx is being run by a normal, non-root user
  • Nginx translates all “incomplete” listen directives by substituting missing values with their default values so that each block can be evaluated by its IP address and port.
  • In any case, the port must be matched exactly.
  • If there are multiple server blocks with the same level of specificity matching, Nginx then begins to evaluate the server_name directive of each server block.
  • Nginx will only evaluate the server_name directive when it needs to distinguish between server blocks that match to the same level of specificity in the listen directive.
  • Nginx checks the request’s “Host” header. This value holds the domain or IP address that the client was actually trying to reach.
  • Nginx will first try to find a server block with a server_name that matches the value in the “Host” header of the request exactly.
  • If no exact match is found, Nginx will then try to find a server block with a server_name that matches using a leading wildcard (indicated by a * at the beginning of the name in the config).
  • If no match is found using a leading wildcard, Nginx then looks for a server block with a server_name that matches using a trailing wildcard (indicated by a server name ending with a * in the config)
  • If no match is found using a trailing wildcard, Nginx then evaluates server blocks that define the server_name using regular expressions (indicated by a ~ before the name).
  • If no regular expression match is found, Nginx then selects the default server block for that IP address and port.
  • There can be only one default_server declaration per each IP address/port combination.
  • Location blocks live within server blocks (or other location blocks) and are used to decide how to process the request URI (the part of the request that comes after the domain name or IP address/port).
  • If no modifiers are present, the location is interpreted as a prefix match.
  • =: If an equal sign is used, this block will be considered a match if the request URI exactly matches the location given.
  • ~: If a tilde modifier is present, this location will be interpreted as a case-sensitive regular expression match.
  • ~*: If a tilde and asterisk modifier is used, the location block will be interpreted as a case-insensitive regular expression match.
  • ^~: If a carat and tilde modifier is present, and if this block is selected as the best non-regular expression match, regular expression matching will not take place.
  • Keep in mind that if this block is selected and the request is fulfilled using an index page, an internal redirect will take place to another location that will be the actual handler of the request
  • Keeping in mind the types of location declarations we described above, Nginx evaluates the possible location contexts by comparing the request URI to each of the locations.
  • Nginx begins by checking all prefix-based location matches (all location types not involving a regular expression).
  • First, Nginx looks for an exact match.
  • If no exact (with the = modifier) location block matches are found, Nginx then moves on to evaluating non-exact prefixes.
  • After the longest matching prefix location is determined and stored, Nginx moves on to evaluating the regular expression locations (both case sensitive and insensitive).
  • by default, Nginx will serve regular expression matches in preference to prefix matches.
  • regular expression matches within the longest prefix match will “jump the line” when Nginx evaluates regex locations.
  • The exceptions to the “only one location block” rule may have implications on how the request is actually served and may not align with the expectations you had when designing your location blocks.
  • The index directive always leads to an internal redirect if it is used to handle the request.
  • In the case above, if you really need the execution to stay in the first block, you will have to come up with a different method of satisfying the request to the directory.
  • one way of preventing an index from switching contexts, but it’s probably not useful for most configurations
  • the try_files directive. This directive tells Nginx to check for the existence of a named set of files or directories.
  • the rewrite directive. When using the last parameter with the rewrite directive, or when using no parameter at all, Nginx will search for a new matching location based on the results of the rewrite.
  • The error_page directive can lead to an internal redirect similar to that created by try_files.
  • when certain status codes are encountered.
張 旭

Think Before you NodePort in Kubernetes - Oteemo - 0 views

oteemo.com/think-nodeport-kubernetes

kubernetes networking

shared by 張 旭 on 23 Jun 21 - No Cached
  • Two options are provided for Services intended for external use: a NodePort, or a LoadBalancer
  • no built-in cloud load balancers for Kubernetes in bare-metal environments
  • NodePort may not be your best choice.
  • ...15 more annotations...
  • NodePort, by design, bypasses almost all network security in Kubernetes.
  • NetworkPolicy resources can currently only control NodePorts by allowing or disallowing all traffic on them.
  • put a network filter in front of all the nodes
  • if a Nodeport-ranged Service is advertised to the public, it may serve as an invitation to black-hats to scan and probe
  • When Kubernetes creates a NodePort service, it allocates a port from a range specified in the flags that define your Kubernetes cluster. (By default, these are ports ranging from 30000-32767.)
  • By design, Kubernetes NodePort cannot expose standard low-numbered ports like 80 and 443, or even 8080 and 8443.
  • A port in the NodePort range can be specified manually, but this would mean the creation of a list of non-standard ports, cross-referenced with the applications they map to
  • if you want the exposed application to be highly available, everything contacting the application has to know all of your node addresses, or at least more than one.
  • non-standard ports.
  • Ingress resources use an Ingress controller (the nginx one is common but not by any means the only choice) and an external load balancer or public IP to enable path-based routing of external requests to internal Services.
  • With a single point of entry to expose and secure
  • get simpler TLS management!
  • consider putting a real load balancer in front of your NodePort Services before opening them up to the world
  • Google very recently released an alpha-stage bare-metal load balancer that, once installed in your cluster, will load-balance using BGP
  • NodePort Services are easy to create but hard to secure, hard to manage, and not especially friendly to others
張 旭

jwilder/nginx-proxy: Automated nginx proxy for Docker containers using docker-gen - 0 views

github.com/nginx-proxy

docker nginx proxy server

shared by 張 旭 on 24 Apr 17 - No Cached
  • docker-gen generates reverse proxy configs for nginx and reloads nginx when containers are started and stopped.
  • /var/run/docker.sock:/tmp/docker.sock:ro
  • Use this image to fully support HTTP/2 (including ALPN required by recent Chrome versions).
  • ...10 more annotations...
  • support multiple virtual hosts for a container
  • to connect to your backend using HTTPS instead of HTTP, set VIRTUAL_PROTO=https on the backend container.
  • The contents of /path/to/certs should contain the certificates and private keys for any virtual hosts in use.
  • to replace the default proxy settings for the nginx container, add a configuration file at /etc/nginx/proxy.conf
  • The default configuration blocks the Proxy HTTP request header from being sent to downstream servers
  • add your configuration file under /etc/nginx/conf.d using a name ending in .conf
  • If your container exposes multiple ports, nginx-proxy will default to the service running on port 80. If you need to specify a different port, you can set a VIRTUAL_PORT env var to select a different one.
  • To add settings on a per-VIRTUAL_HOST basis, add your configuration file under /etc/nginx/vhost.d
  • SNI
  • The default behavior for the proxy when port 80 and 443 are exposed is as follows: If a container has a usable cert, port 80 will redirect to 443 for that container so that HTTPS is always preferred when available. If the container does not have a usable cert, a 503 will be returned.
張 旭

php - CakePHP: No such file or directory (trying to connect via unix:///var/mysql/mysql... - 0 views

stackoverflow.com/...onnect-via-unix-var-mysql-mysq

cakephp config php MVC framework development mac mysql

shared by 張 旭 on 08 Sep 13 - No Cached
  • 張 旭 on 08 Sep 13
     
    'port' => '/path/to/mysql.sock'
  • 張 旭 on 08 Sep 13
     
    'port' => '/private/tmp/mysql.sock'
張 旭

MySQL :: MySQL 5.7 Reference Manual :: 19.2.1.2 Configuring an Instance for Group Repli... - 0 views

dev.mysql.com/...ion-configuring-instances.html

mysql database replication system

shared by 張 旭 on 19 Mar 17 - No Cached
  • store replication metadata in system tables instead of files
  • collect the write set and encode it as a hash using the XXHASH64 hashing algorithm
  • not start operations automatically when the server starts
  • ...10 more annotations...
  • for incoming connections from other members in the group
  • The server listens on this port for member-to-member connections. This port must not be used for user applications at all
  • The loose- prefix used for the group_replication variables above instructs the server to continue to start if the Group Replication plugin has not been loaded at the time the server is started.
  • For example, if each server instance is on a different machine use the IP and port of the machine, such as 10.0.0.1:33061. The recommended port for group_replication_local_address is 33061
  • does not need to list all members in the group
  • The server that starts the group does not make use of this option, since it is the initial server and as such, it is in charge of bootstrapping the group
  • start the bootstrap member first, and let it create the group
  • Creating a group and joining multiple members at the same time is not supported.
  • must only be used on one server instance at any time
  • Disable this option after the first server instance comes online
張 旭

Automated Nginx Reverse Proxy for Docker - 0 views

jasonwilder.com/...nginx-reverse-proxy-for-docker

docker nginx proxy haproxy system web server

shared by 張 旭 on 04 Dec 15 - No Cached
  • Docker containers are assigned random IPs and ports which makes addressing them much more complicated from a client perspsective
  • Binding the container to the hosts port can prevent multiple containers from running on the same host. For example, only one container can bind to port 80 at a time.
  • Docker provides a remote API to inspect containers and access their IP, Ports and other configuration meta-data.
  • ...1 more annotation...
  • nginx template can be used to generate a reverse proxy configuration for docker containers using virtual hosts for routing.
張 旭

Ingress - Kubernetes - 0 views

kubernetes.io/...ingress

kubernetes networking network ingress

shared by 張 旭 on 04 Jul 19 - No Cached
  • An API object that manages external access to the services in a cluster, typically HTTP.
  • load balancing
  • SSL termination
  • ...62 more annotations...
  • name-based virtual hosting
  • Edge routerA router that enforces the firewall policy for your cluster.
  • Cluster networkA set of links, logical or physical, that facilitate communication within a cluster according to the Kubernetes networking model.
  • A Kubernetes ServiceA way to expose an application running on a set of Pods as a network service. that identifies a set of Pods using labelTags objects with identifying attributes that are meaningful and relevant to users. selectors.
  • Services are assumed to have virtual IPs only routable within the cluster network.
  • Ingress exposes HTTP and HTTPS routes from outside the cluster to services within the cluster.
  • Traffic routing is controlled by rules defined on the Ingress resource.
  • An Ingress can be configured to give Services externally-reachable URLs, load balance traffic, terminate SSL / TLS, and offer name based virtual hosting.
  • Exposing services other than HTTP and HTTPS to the internet typically uses a service of type Service.Type=NodePort or Service.Type=LoadBalancer.
  • You must have an ingress controller to satisfy an Ingress. Only creating an Ingress resource has no effect.
  • As with all other Kubernetes resources, an Ingress needs apiVersion, kind, and metadata fields
  • Ingress frequently uses annotations to configure some options depending on the Ingress controller,
  • Ingress resource only supports rules for directing HTTP traffic.
  • An optional host.
  • A list of paths
  • A backend is a combination of Service and port names
  • has an associated backend
  • Both the host and path must match the content of an incoming request before the load balancer directs traffic to the referenced Service.
  • HTTP (and HTTPS) requests to the Ingress that matches the host and path of the rule are sent to the listed backend.
  • A default backend is often configured in an Ingress controller to service any requests that do not match a path in the spec.
  • An Ingress with no rules sends all traffic to a single default backend.
  • Ingress controllers and load balancers may take a minute or two to allocate an IP address.
  • A fanout configuration routes traffic from a single IP address to more than one Service, based on the HTTP URI being requested.
  • nginx.ingress.kubernetes.io/rewrite-target: /
  • describe ingress
  • get ingress
  • Name-based virtual hosts support routing HTTP traffic to multiple host names at the same IP address.
  • route requests based on the Host header.
  • an Ingress resource without any hosts defined in the rules, then any web traffic to the IP address of your Ingress controller can be matched without a name based virtual host being required.
  • secure an Ingress by specifying a SecretStores sensitive information, such as passwords, OAuth tokens, and ssh keys. that contains a TLS private key and certificate.
  • Currently the Ingress only supports a single TLS port, 443, and assumes TLS termination.
  • An Ingress controller is bootstrapped with some load balancing policy settings that it applies to all Ingress, such as the load balancing algorithm, backend weight scheme, and others.
  • persistent sessions, dynamic weights) are not yet exposed through the Ingress. You can instead get these features through the load balancer used for a Service.
  • review the controller specific documentation to see how they handle health checks
  • edit ingress
  • After you save your changes, kubectl updates the resource in the API server, which tells the Ingress controller to reconfigure the load balancer.
  • kubectl replace -f on a modified Ingress YAML file.
  • Node: A worker machine in Kubernetes, part of a cluster.
  • in most common Kubernetes deployments, nodes in the cluster are not part of the public internet.
  • Edge router: A router that enforces the firewall policy for your cluster.
  • a gateway managed by a cloud provider or a physical piece of hardware.
  • Cluster network: A set of links, logical or physical, that facilitate communication within a cluster according to the Kubernetes networking model.
  • Service: A Kubernetes Service that identifies a set of Pods using label selectors.
  • An Ingress may be configured to give Services externally-reachable URLs, load balance traffic, terminate SSL / TLS, and offer name-based virtual hosting.
  • An Ingress does not expose arbitrary ports or protocols.
  • You must have an Ingress controller to satisfy an Ingress. Only creating an Ingress resource has no effect.
  • The name of an Ingress object must be a valid DNS subdomain name
  • The Ingress spec has all the information needed to configure a load balancer or proxy server.
  • Ingress resource only supports rules for directing HTTP(S) traffic.
  • An Ingress with no rules sends all traffic to a single default backend and .spec.defaultBackend is the backend that should handle requests in that case.
  • If defaultBackend is not set, the handling of requests that do not match any of the rules will be up to the ingress controller
  • A common usage for a Resource backend is to ingress data to an object storage backend with static assets.
  • Exact: Matches the URL path exactly and with case sensitivity.
  • Prefix: Matches based on a URL path prefix split by /. Matching is case sensitive and done on a path element by element basis.
  • multiple paths within an Ingress will match a request. In those cases precedence will be given first to the longest matching path.
  • Hosts can be precise matches (for example “foo.bar.com”) or a wildcard (for example “*.foo.com”).
  • No match, wildcard only covers a single DNS label
  • Each Ingress should specify a class, a reference to an IngressClass resource that contains additional configuration including the name of the controller that should implement the class.
  • secure an Ingress by specifying a Secret that contains a TLS private key and certificate.
  • The Ingress resource only supports a single TLS port, 443, and assumes TLS termination at the ingress point (traffic to the Service and its Pods is in plaintext).
  • TLS will not work on the default rule because the certificates would have to be issued for all the possible sub-domains.
  • hosts in the tls section need to explicitly match the host in the rules section.
crazylion lee

The History of the URL: Domain, Protocol, and Port - Eager Blog - 0 views

eager.io/...of-the-url-domain-and-protocol

url history web

shared by crazylion lee on 30 Jan 17 - No Cached
  • crazylion lee on 30 Jan 17
     
    "The History of the URL: Domain, Protocol, and Port"
crazylion lee

journeyapps/zxing-android-embedded: Port of the ZXing Android application as an Android... - 0 views

github.com/...zxing-android-embedded

android qrcode

shared by crazylion lee on 01 Apr 16 - No Cached
  • crazylion lee on 01 Apr 16
     
    "Port of the ZXing Android application as an Android library project, for embedding in an Android application."
張 旭

Deploy a registry server | Docker Documentation - 0 views

docs.docker.com/...deploying

docker system

shared by 張 旭 on 06 Sep 18 - No Cached
  • By default, secrets are mounted into a service at /run/secrets/<secret-name>
  • docker secret create
  • If you use a distributed storage driver, such as Amazon S3, you can use a fully replicated service. Each worker can write to the storage back-end without causing write conflicts.
  • ...10 more annotations...
  • You can access the service on port 443 of any swarm node. Docker sends the requests to the node which is running the service.
  • --publish published=443,target=443
  • The most important aspect is that a load balanced cluster of registries must share the same resources
  • S3 or Azure, they should be accessing the same resource and share an identical configuration.
  • you must make sure you are properly sending the X-Forwarded-Proto, X-Forwarded-For, and Host headers to their “client-side” values. Failure to do so usually makes the registry issue redirects to internal hostnames or downgrading from https to http.
  • A properly secured registry should return 401 when the “/v2/” endpoint is hit without credentials
  • registries should always implement access restrictions.
  • REGISTRY_AUTH=htpasswd
  • REGISTRY_AUTH_HTPASSWD_PATH=/auth/htpasswd
  • The registry also supports delegated authentication which redirects users to a specific trusted token server. This approach is more complicated to set up, and only makes sense if you need to fully configure ACLs and need more control over the registry’s integration into your global authorization and authentication systems.
  • 張 旭 on 06 Sep 18
     
    "You can access the service on port 443 of any swarm node. Docker sends the requests to the node which is running the service. "
張 旭

Let's Encrypt & Docker - Træfik - 0 views

docs.traefik.io/...docker-and-lets-encrypt

traefik docker networking proxy

shared by 張 旭 on 19 Sep 18 - No Cached
  • automatically discover any services on the Docker host and let Træfik reconfigure itself automatically when containers get created (or shut down) so HTTP traffic can be routed accordingly.
  • use Træfik as a layer-7 load balancer with SSL termination for a set of micro-services used to run a web application.
  • Docker containers can only communicate with each other over TCP when they share at least one network.
  • ...15 more annotations...
  • Docker under the hood creates IPTable rules so containers can't reach other containers unless you'd want to
  • Træfik can listen to Docker events and reconfigure its own internal configuration when containers are created (or shut down).
  • Enable the Docker provider and listen for container events on the Docker unix socket we've mounted earlier.
  • Enable automatic request and configuration of SSL certificates using Let's Encrypt. These certificates will be stored in the acme.json file, which you can back-up yourself and store off-premises.
  • there isn't a single container that has any published ports to the host -- everything is routed through Docker networks.
  • Thanks to Docker labels, we can tell Træfik how to create its internal routing configuration.
  • container labels and service labels
  • With the traefik.enable label, we tell Træfik to include this container in its internal configuration.
  • tell Træfik to use the web network to route HTTP traffic to this container.
  • Service labels allow managing many routes for the same container.
  • When both container labels and service labels are defined, container labels are just used as default values for missing service labels but no frontend/backend are going to be defined only with these labels.
  • In the example, two service names are defined : basic and admin. They allow creating two frontends and two backends.
  • Always specify the correct port where the container expects HTTP traffic using traefik.port label.
  • all containers that are placed in the same network as Træfik will automatically be reachable from the outside world
  • With the traefik.frontend.auth.basic label, it's possible for Træfik to provide a HTTP basic-auth challenge for the endpoints you provide the label for.
張 旭

Auto DevOps | GitLab - 0 views

docs.gitlab.com/...index.html

gitlab auto devops CI deploy

shared by 張 旭 on 02 Aug 19 - No Cached
  • Auto DevOps provides pre-defined CI/CD configuration which allows you to automatically detect, build, test, deploy, and monitor your applications
  • Just push your code and GitLab takes care of everything else.
  • Auto DevOps will be automatically disabled on the first pipeline failure.
  • ...78 more annotations...
  • Your project will continue to use an alternative CI/CD configuration file if one is found
  • Auto DevOps works with any Kubernetes cluster;
  • using the Docker or Kubernetes executor, with privileged mode enabled.
  • Base domain (needed for Auto Review Apps and Auto Deploy)
  • Kubernetes (needed for Auto Review Apps, Auto Deploy, and Auto Monitoring)
  • Prometheus (needed for Auto Monitoring)
  • scrape your Kubernetes cluster.
  • project level as a variable: KUBE_INGRESS_BASE_DOMAIN
  • A wildcard DNS A record matching the base domain(s) is required
  • Once set up, all requests will hit the load balancer, which in turn will route them to the Kubernetes pods that run your application(s).
  • review/ (every environment starting with review/)
  • staging
  • production
  • need to define a separate KUBE_INGRESS_BASE_DOMAIN variable for all the above based on the environment.
  • Continuous deployment to production: Enables Auto Deploy with master branch directly deployed to production.
  • Continuous deployment to production using timed incremental rollout
  • Automatic deployment to staging, manual deployment to production
  • Auto Build creates a build of the application using an existing Dockerfile or Heroku buildpacks.
  • If a project’s repository contains a Dockerfile, Auto Build will use docker build to create a Docker image.
  • Each buildpack requires certain files to be in your project’s repository for Auto Build to successfully build your application.
  • Auto Test automatically runs the appropriate tests for your application using Herokuish and Heroku buildpacks by analyzing your project to detect the language and framework.
  • Auto Code Quality uses the Code Quality image to run static analysis and other code checks on the current code.
  • Static Application Security Testing (SAST) uses the SAST Docker image to run static analysis on the current code and checks for potential security issues.
  • Dependency Scanning uses the Dependency Scanning Docker image to run analysis on the project dependencies and checks for potential security issues.
  • License Management uses the License Management Docker image to search the project dependencies for their license.
  • Vulnerability Static Analysis for containers uses Clair to run static analysis on a Docker image and checks for potential security issues.
  • Review Apps are temporary application environments based on the branch’s code so developers, designers, QA, product managers, and other reviewers can actually see and interact with code changes as part of the review process. Auto Review Apps create a Review App for each branch. Auto Review Apps will deploy your app to your Kubernetes cluster only. When no cluster is available, no deployment will occur.
  • The Review App will have a unique URL based on the project ID, the branch or tag name, and a unique number, combined with the Auto DevOps base domain.
  • Review apps are deployed using the auto-deploy-app chart with Helm, which can be customized.
  • Your apps should not be manipulated outside of Helm (using Kubernetes directly).
  • Dynamic Application Security Testing (DAST) uses the popular open source tool OWASP ZAProxy to perform an analysis on the current code and checks for potential security issues.
  • Auto Browser Performance Testing utilizes the Sitespeed.io container to measure the performance of a web page.
  • add the paths to a file named .gitlab-urls.txt in the root directory, one per line.
  • After a branch or merge request is merged into the project’s default branch (usually master), Auto Deploy deploys the application to a production environment in the Kubernetes cluster, with a namespace based on the project name and unique project ID
  • Auto Deploy doesn’t include deployments to staging or canary by default, but the Auto DevOps template contains job definitions for these tasks if you want to enable them.
  • Apps are deployed using the auto-deploy-app chart with Helm.
  • For internal and private projects a GitLab Deploy Token will be automatically created, when Auto DevOps is enabled and the Auto DevOps settings are saved.
  • If the GitLab Deploy Token cannot be found, CI_REGISTRY_PASSWORD is used. Note that CI_REGISTRY_PASSWORD is only valid during deployment.
  • If present, DB_INITIALIZE will be run as a shell command within an application pod as a helm post-install hook.
  • a post-install hook means that if any deploy succeeds, DB_INITIALIZE will not be processed thereafter.
  • DB_MIGRATE will be run as a shell command within an application pod as a helm pre-upgrade hook.
    • 張 旭
      張 旭 on 02 Aug 19
       
      如果專案類型不同，就要去查 buildpacks 裡面如何叫用該指令，例如 laravel 的 migration
    • 張 旭
      張 旭 on 02 Aug 19
       
      如果是自己的 Dockerfile 建立起來的，看來就不用鳥 buildpacks 的作法
  • Once your application is deployed, Auto Monitoring makes it possible to monitor your application’s server and response metrics right out of the box.
  • annotate the NGINX Ingress deployment to be scraped by Prometheus using prometheus.io/scrape: "true" and prometheus.io/port: "10254"
  • If you are also using Auto Review Apps and Auto Deploy and choose to provide your own Dockerfile, make sure you expose your application to port 5000 as this is the port assumed by the default Helm chart.
  • While Auto DevOps provides great defaults to get you started, you can customize almost everything to fit your needs; from custom buildpacks, to Dockerfiles, Helm charts, or even copying the complete CI/CD configuration into your project to enable staging and canary deployments, and more.
  • If your project has a Dockerfile in the root of the project repo, Auto DevOps will build a Docker image based on the Dockerfile rather than using buildpacks.
  • Auto DevOps uses Helm to deploy your application to Kubernetes.
  • Bundled chart - If your project has a ./chart directory with a Chart.yaml file in it, Auto DevOps will detect the chart and use it instead of the default one.
  • Create a project variable AUTO_DEVOPS_CHART with the URL of a custom chart to use or create two project variables AUTO_DEVOPS_CHART_REPOSITORY with the URL of a custom chart repository and AUTO_DEVOPS_CHART with the path to the chart.
  • make use of the HELM_UPGRADE_EXTRA_ARGS environment variable to override the default values in the values.yaml file in the default Helm chart.
  • specify the use of a custom Helm chart per environment by scoping the environment variable to the desired environment.
    • 張 旭
      張 旭 on 02 Aug 19
       
      Auto DevOps 就是一套人家寫好好的傳便便的 .gitlab-ci.yml
  • Your additions will be merged with the Auto DevOps template using the behaviour described for include
  • copy and paste the contents of the Auto DevOps template into your project and edit this as needed.
  • In order to support applications that require a database, PostgreSQL is provisioned by default.
  • Set up the replica variables using a project variable and scale your application by just redeploying it!
  • You should not scale your application using Kubernetes directly.
  • Some applications need to define secret variables that are accessible by the deployed application.
  • Auto DevOps detects variables where the key starts with K8S_SECRET_ and make these prefixed variables available to the deployed application, as environment variables.
  • Auto DevOps pipelines will take your application secret variables to populate a Kubernetes secret.
  • Environment variables are generally considered immutable in a Kubernetes pod.
  • if you update an application secret without changing any code then manually create a new pipeline, you will find that any running application pods will not have the updated secrets.
  • Variables with multiline values are not currently supported
  • The normal behavior of Auto DevOps is to use Continuous Deployment, pushing automatically to the production environment every time a new pipeline is run on the default branch.
  • If STAGING_ENABLED is defined in your project (e.g., set STAGING_ENABLED to 1 as a CI/CD variable), then the application will be automatically deployed to a staging environment, and a production_manual job will be created for you when you’re ready to manually deploy to production.
  • If CANARY_ENABLED is defined in your project (e.g., set CANARY_ENABLED to 1 as a CI/CD variable) then two manual jobs will be created: canary which will deploy the application to the canary environment production_manual which is to be used by you when you’re ready to manually deploy to production.
  • If INCREMENTAL_ROLLOUT_MODE is set to manual in your project, then instead of the standard production job, 4 different manual jobs will be created: rollout 10% rollout 25% rollout 50% rollout 100%
  • The percentage is based on the REPLICAS variable and defines the number of pods you want to have for your deployment.
  • To start a job, click on the play icon next to the job’s name.
  • Once you get to 100%, you cannot scale down, and you’d have to roll back by redeploying the old version using the rollback button in the environment page.
  • With INCREMENTAL_ROLLOUT_MODE set to manual and with STAGING_ENABLED
  • not all buildpacks support Auto Test yet
  • When a project has been marked as private, GitLab’s Container Registry requires authentication when downloading containers.
  • Authentication credentials will be valid while the pipeline is running, allowing for a successful initial deployment.
  • After the pipeline completes, Kubernetes will no longer be able to access the Container Registry.
  • We strongly advise using GitLab Container Registry with Auto DevOps in order to simplify configuration and prevent any unforeseen issues.
張 旭

Understanding the Nginx Configuration File Structure and Configuration Contexts | Digit... - 0 views

www.digitalocean.com/...ure-and-configuration-contexts

nginx web server

shared by 張 旭 on 05 Dec 17 - No Cached
  • discussing the basic structure of an Nginx configuration file along with some guidelines on how to design your files
  • /etc/nginx/nginx.conf
  • In Nginx parlance, the areas that these brackets define are called "contexts" because they contain configuration details that are separated according to their area of concern
  • ...50 more annotations...
  • contexts can be layered within one another
  • if a directive is valid in multiple nested scopes, a declaration in a broader context will be passed on to any child contexts as default values.
  • The children contexts can override these values at will
  • Nginx will error out on reading a configuration file with directives that are declared in the wrong context.
  • The most general context is the "main" or "global" context
  • Any directive that exist entirely outside of these blocks is said to inhabit the "main" context
  • The main context represents the broadest environment for Nginx configuration.
  • The "events" context is contained within the "main" context. It is used to set global options that affect how Nginx handles connections at a general level.
  • Nginx uses an event-based connection processing model, so the directives defined within this context determine how worker processes should handle connections.
  • the connection processing method is automatically selected based on the most efficient choice that the platform has available
  • a worker will only take a single connection at a time
  • When configuring Nginx as a web server or reverse proxy, the "http" context will hold the majority of the configuration.
  • The http context is a sibling of the events context, so they should be listed side-by-side, rather than nested
  • fine-tune the TCP keep alive settings (keepalive_disable, keepalive_requests, and keepalive_timeout)
  • The "server" context is declared within the "http" context.
  • multiple declarations
  • each instance defines a specific virtual server to handle client requests
  • Each client request will be handled according to the configuration defined in a single server context, so Nginx must decide which server context is most appropriate based on details of the request.
  • listen: The ip address / port combination that this server block is designed to respond to.
  • server_name: This directive is the other component used to select a server block for processing.
  • "Host" header
  • configure files to try to respond to requests (try_files)
  • issue redirects and rewrites (return and rewrite)
  • set arbitrary variables (set)
  • Location contexts share many relational qualities with server contexts
  • multiple location contexts can be defined, each location is used to handle a certain type of client request, and each location is selected by virtue of matching the location definition against the client request through a selection algorithm
  • Location blocks live within server contexts and, unlike server blocks, can be nested inside one another.
  • While server contexts are selected based on the requested IP address/port combination and the host name in the "Host" header, location blocks further divide up the request handling within a server block by looking at the request URI
  • The request URI is the portion of the request that comes after the domain name or IP address/port combination.
  • New directives at this level allow you to reach locations outside of the document root (alias), mark the location as only internally accessible (internal), and proxy to other servers or locations (using http, fastcgi, scgi, and uwsgi proxying).
  • These can then be used to do A/B testing by providing different content to different hosts.
  • configures Perl handlers for the location they appear in
  • set the value of a variable depending on the value of another variable
  • used to map MIME types to the file extensions that should be associated with them.
  • this context defines a named pool of servers that Nginx can then proxy requests to
  • The upstream context should be placed within the http context, outside of any specific server contexts.
  • The upstream context can then be referenced by name within server or location blocks to pass requests of a certain type to the pool of servers that have been defined.
  • function as a high performance mail proxy server
  • The mail context is defined within the "main" or "global" context (outside of the http context).
  • Nginx has the ability to redirect authentication requests to an external authentication server
  • the if directive in Nginx will execute the instructions contained if a given test returns "true".
  • Since Nginx will test conditions of a request with many other purpose-made directives, if should not be used for most forms of conditional execution.
  • The limit_except context is used to restrict the use of certain HTTP methods within a location context.
  • The result of the above example is that any client can use the GET and HEAD verbs, but only clients coming from the 192.168.1.1/24 subnet are allowed to use other methods.
  • Many directives are valid in more than one context
  • it is usually best to declare directives in the highest context to which they are applicable, and overriding them in lower contexts as necessary.
  • Declaring at higher levels provides you with a sane default
  • Nginx already engages in a well-documented selection algorithm for things like selecting server blocks and location blocks.
  • instead of relying on rewrites to get a user supplied request into the format that you would like to work with, you should try to set up two blocks for the request, one of which represents the desired method, and the other that catches messy requests and redirects (and possibly rewrites) them to your correct block.
  • incorrect requests can get by with a redirect rather than a rewrite, which should execute with lower overhead.
張 旭

What is Kubernetes Ingress? | IBM - 0 views

www.ibm.com/...kubernetes-ingress

kubernetes networking

shared by 張 旭 on 27 Aug 21 - No Cached
  • expose an application to the outside of your Kubernetes cluster,
  • ClusterIP, NodePort, LoadBalancer, and Ingress.
  • A service is essentially a frontend for your application that automatically reroutes traffic to available pods in an evenly distributed way.
  • ...23 more annotations...
  • Services are an abstract way of exposing an application running on a set of pods as a network service.
  • Pods are immutable, which means that when they die, they are not resurrected. The Kubernetes cluster creates new pods in the same node or in a new node once a pod dies. 
  • A service provides a single point of access from outside the Kubernetes cluster and allows you to dynamically access a group of replica pods. 
  • For internal application access within a Kubernetes cluster, ClusterIP is the preferred method
  • To expose a service to external network requests, NodePort, LoadBalancer, and Ingress are possible options.
  • Kubernetes Ingress is an API object that provides routing rules to manage external users' access to the services in a Kubernetes cluster, typically via HTTPS/HTTP.
  • content-based routing, support for multiple protocols, and authentication.
  • Ingress is made up of an Ingress API object and the Ingress Controller.
  • Kubernetes Ingress is an API object that describes the desired state for exposing services to the outside of the Kubernetes cluster.
  • An Ingress Controller reads and processes the Ingress Resource information and usually runs as pods within the Kubernetes cluster.  
  • If Kubernetes Ingress is the API object that provides routing rules to manage external access to services, Ingress Controller is the actual implementation of the Ingress API.
  • The Ingress Controller is usually a load balancer for routing external traffic to your Kubernetes cluster and is responsible for L4-L7 Network Services. 
  • Layer 7 (L7) refers to the application level of the OSI stack—external connections load-balanced across pods, based on requests.
  • if Kubernetes Ingress is a computer, then Ingress Controller is a programmer using the computer and taking action.
  • Ingress Rules are a set of rules for processing inbound HTTP traffic. An Ingress with no rules sends all traffic to a single default backend service. 
  • the Ingress Controller is an application that runs in a Kubernetes cluster and configures an HTTP load balancer according to Ingress Resources.
  • The load balancer can be a software load balancer running in the cluster or a hardware or cloud load balancer running externally.
  • ClusterIP is the preferred option for internal service access and uses an internal IP address to access the service
  • A NodePort is a virtual machine (VM) used to expose a service on a Static Port number.
  • a NodePort would be used to expose a single service (with no load-balancing requirements for multiple services).
  • Ingress enables you to consolidate the traffic-routing rules into a single resource and runs as part of a Kubernetes cluster.
  • An application is accessed from the Internet via Port 80 (HTTP) or Port 443 (HTTPS), and Ingress is an object that allows access to your Kubernetes services from outside the Kubernetes cluster. 
  • To implement Ingress, you need to configure an Ingress Controller in your cluster—it is responsible for processing Ingress Resource information and allowing traffic based on the Ingress Rules.
1 - 20 of 51 Next › Last »
Showing 20▼ items per page