Skip to main content

Home/ Larvata/ Group items tagged iptables

Rss Feed Group items tagged

Filter: All | Bookmarks | Topics Simple Middle
張 旭

chaifeng/ufw-docker: To fix the Docker and UFW security flaw without disabling iptables - 0 views

github.com/ufw-docker

iptables docker

shared by 張 旭 on 13 Jul 22 - No Cached
  • It requires to disable docker's iptables function first, but this also means that we give up docker's network management function.
  • This causes containers will not be able to access the external network.
  • such as -A POSTROUTING ! -o docker0 -s 172.17.0.0/16 -j MASQUERADE. But this only allows containers that belong to network 172.17.0.0/16 can access outside.
  • ...13 more annotations...
  • Don't need to disable Docker's iptables and let Docker to manage it's network.
  • The public network cannot access ports that published by Docker.
  • In a very convenient way to allow/deny public networks to access container ports without additional software and extra configurations
  • Enable Docker's iptables feature. Remove all changes like --iptables=false , including configuration file /etc/docker/daemon.json
  • Modify the UFW configuration file /etc/ufw/after.rules
  • There may be some unknown reasons cause the UFW rules will not take effect after restart UFW, please reboot servers.
  • If we publish a port by using option -p 8080:80, we should use the container port 80, not the host port 8080
  • allow the private networks to be able to visit each other.
  • The following rules block connection requests initiated by all public networks, but allow internal networks to access external networks.
  • Since the UDP protocol is stateless, it is not possible to block the handshake signal that initiates the connection request as TCP does.
  • For GNU/Linux we can find the local port range in the file /proc/sys/net/ipv4/ip_local_port_range. The default range is 32768 60999
  • It not only exposes ports of containers but also exposes ports of the host.
  • Cannot expose services running on hosts and containers at the same time by the same command.
  • 張 旭 on 13 Jul 22
     
    "It requires to disable docker's iptables function first, but this also means that we give up docker's network management function."
張 旭

kubernetes 简介：service 和 kube-proxy 原理 | Cizixs Write Here - 0 views

cizixs.com/...duction-service-and-kube-proxy

kubernetes system networking

shared by 張 旭 on 01 Jul 21 - No Cached
  • kubernetes 对网络的要求是：容器之间（包括同一台主机上的容器，和不同主机的容器）可以互相通信，容器和集群中所有的节点也能直接通信。
  • 跨主机网络配置：flannel
  • flannel 也能够通过 CNI 插件的形式使用。
  • ...8 more annotations...
  • 从集群中获取每个 pod ip 地址，然后也能在集群内部直接通过 podIP:Port 来获取对应的服务。
  • pod 是经常变化的，每次更新 ip 地址都可能会发生变化，如果直接访问容器 ip 的话，会有很大的问题。
  • “服务”（service），每个服务都一个固定的虚拟 ip（这个 ip 也被称为 cluster IP），自动并且动态地绑定后面的 pod，所有的网络请求直接访问服务 ip，服务会自动向后端做转发。
  • 实现 service 这一功能的关键，就是 kube-proxy。
  • kube-proxy 运行在每个节点上，监听 API Server 中服务对象的变化，通过管理 iptables 来实现网络的转发。
  • kube-proxy 要求 NODE 节点操作系统中要具备 /sys/module/br_netfilter 文件，而且还要设置 bridge-nf-call-iptables=1
  • iptables 完全实现 iptables 来实现 service，是目前默认的方式，也是推荐的方式，效率很高（只有内核中 netfilter 一些损耗）。
  • 可以在终端上启动 kube-proxy，也可以使用诸如 systemd 这样的工具来管理它
張 旭

The dangers of UFW + Docker | Viktor's ramblings - 0 views

blog.viktorpetersson.com/...the-dangers-of-ufw-docker.html

iptables docker ufw firewall

shared by 張 旭 on 13 Jul 22 - No Cached
  • UFW doesn’t tell you iptables true state (not shocking, but still).
  • 張 旭 on 13 Jul 22
     
    "UFW doesn't tell you iptables true state (not shocking, but still). "
張 旭

Let's Encrypt & Docker - Træfik - 0 views

docs.traefik.io/...docker-and-lets-encrypt

traefik docker networking proxy

shared by 張 旭 on 19 Sep 18 - No Cached
  • automatically discover any services on the Docker host and let Træfik reconfigure itself automatically when containers get created (or shut down) so HTTP traffic can be routed accordingly.
  • use Træfik as a layer-7 load balancer with SSL termination for a set of micro-services used to run a web application.
  • Docker containers can only communicate with each other over TCP when they share at least one network.
  • ...15 more annotations...
  • Docker under the hood creates IPTable rules so containers can't reach other containers unless you'd want to
  • Træfik can listen to Docker events and reconfigure its own internal configuration when containers are created (or shut down).
  • Enable the Docker provider and listen for container events on the Docker unix socket we've mounted earlier.
  • Enable automatic request and configuration of SSL certificates using Let's Encrypt. These certificates will be stored in the acme.json file, which you can back-up yourself and store off-premises.
  • there isn't a single container that has any published ports to the host -- everything is routed through Docker networks.
  • Thanks to Docker labels, we can tell Træfik how to create its internal routing configuration.
  • container labels and service labels
  • With the traefik.enable label, we tell Træfik to include this container in its internal configuration.
  • tell Træfik to use the web network to route HTTP traffic to this container.
  • Service labels allow managing many routes for the same container.
  • When both container labels and service labels are defined, container labels are just used as default values for missing service labels but no frontend/backend are going to be defined only with these labels.
  • In the example, two service names are defined : basic and admin. They allow creating two frontends and two backends.
  • Always specify the correct port where the container expects HTTP traffic using traefik.port label.
  • all containers that are placed in the same network as Træfik will automatically be reachable from the outside world
  • With the traefik.frontend.auth.basic label, it's possible for Træfik to provide a HTTP basic-auth challenge for the endpoints you provide the label for.
張 旭

你到底知不知道什麼是 Kubernetes? | Hwchiu Learning Note - 0 views

www.hwchiu.com/kubernetes-concept.html

kubernetes storage networking programming system

shared by 張 旭 on 03 Feb 19 - No Cached
  • Storage(儲存) 實際上一直都不是一個簡單處理的問題，從軟體面來看實際上牽扯到非常多的層級，譬如 Linux Kernel, FileSystem, Block/File-Level, Cache, Snapshot, Object Storage 等各式各樣的議題可以討論。
  • DRBD
  • 異地備援，容錯機制，快照，重複資料刪除等超多相關的議題基本上從來沒有一個完美的解法能夠滿足所有使用情境。
  • ...20 more annotations...
  • 管理者可能會直接在 NFS Server 上進行 MDADM 來設定相關的 Block Device 並且基於上面提供 Export 供 NFS 使用，甚至底層套用不同的檔案系統 (EXT4/BTF4) 來獲取不同的功能與效能。
  • Kubernetes 就只是 NFS Client 的角色
  • CSI(Container Storage Interface)。CSI 本身作為 Kubernetes 與 Storage Solution 的中介層。
  • 基本上 Pod 裡面每個 Container 會使用 Volume 這個物件來代表容器內的掛載點，而在外部實際上會透過 PVC 以及 PV 的方式來描述這個 Volume 背後的儲存方案伺服器的資訊。
  • 整體會透過 CSI 的元件們與最外面實際上的儲存設備連接，所有儲存相關的功能是否有實現，有支援全部都要仰賴最後面的實際提供者， kubernetes 只透過 CSI 的標準去執行。
  • 在網路部分也有與之對應的 CNI(Container Network Interface). kubernetes 透過 CNI 這個介面來與後方的 網路解決方案 溝通
  • CNI 最基本的要求就是在在對應的階段為對應的容器提供網路能力
  • 目前最常見也是 IPv4 + TCP/UDP 的傳輸方式，因此才會看到大部分的 CNI 都在講這些。
  • 希望所有容器彼此之間可以透過 IPv4 來互相存取彼此，不論是同節點或是跨節點的容器們都要可以滿足這個需求。
  • 容器間到底怎麼傳輸的，需不需要封裝，透過什麼網卡，要不要透過 NAT 處理? 這一切都是 CNI 介面背後的實現
  • 外部網路存取容器服務 (Service/Ingress)
  • kubernetes 在 Service/Ingress 中間自行實現了一個模組，大抵上稱為 kube-proxy, 其底層可以使用 iptables, IPVS, user-space software 等不同的實現方法，這部分是跟 CNI 完全無關。
  • CNI 跟 Service/Ingress 是會衝突的，也有可能彼此沒有配合，這中間沒有絕對的穩定整合。
  • CNI 一般會處理的部份，包含了容器內的 網卡數量,網卡名稱,網卡IP, 以及容器與外部節點的連接能力等
  • CRI (Container Runtime Interface) 或是 Device Plugin
  • 對於 kubernetes 來說，其實本身並不在意到底底下的容器化技術實際上是怎麼實現的，你要用 Docker, rkt, CRI-O 都無所謂，甚至背後是一個偽裝成 Container 的 Virtaul Machine virtlet 都可以。
  • 去思考到底為什麼自己本身的服務需要容器化，容器化可以帶來什麼優點
  • 太多太多的人都認為只要寫一個 Dockerfile 將原先的應用程式們全部包裝起來放在一起就是一個很好的容器 來使用了。
  • 最後就會發現根本把 Container 當作 Virtual Machine 來使用，然後再補一句 Contaienr 根本不好用啊
  • 容器化 不是把直接 Virtual Machine 的使用習慣換個環境使用就叫做 容器化，而是要從概念上去暸解與使用
張 旭

Improving Kubernetes reliability: quicker detection of a Node down | Fatal failure - 0 views

fatalfailure.wordpress.com/...icker-detection-of-a-node-down

kubernetes HA

shared by 張 旭 on 21 Jul 21 - No Cached
  • when a Node gets down, the pods of the broken node are still running for some time and they still get requests, and those requests, will fail.
  • 1- The Kubelet posts its status to the masters using –node-status-update-frequency=10s 2- A node dies 3- The kube controller manager is the one monitoring the nodes, using –-node-monitor-period=5s it checks, in the masters, the node status reported by the Kubelet. 4- Kube controller manager will see the node is unresponsive, and has this grace period –node-monitor-grace-period=40s until it considers the node unhealthy.
  • node-status-update-frequency x (N-1) != node-monitor-grace-period
  • ...2 more annotations...
  • 5- Once the node is marked as unhealthy, the kube controller manager will remove its pods based on –pod-eviction-timeout=5m0s
  • 6- Kube proxy has a watcher over the API, so the very first moment the pods are evicted the proxy will notice and update the iptables of the node, removing the endpoints from the services so the failing pods won’t be accessible anymore.
張 旭

Cluster Networking - Kubernetes - 0 views

kubernetes.io/...networking

kubernetes networking network system

shared by 張 旭 on 08 Jul 19 - No Cached
  • Networking is a central part of Kubernetes, but it can be challenging to understand exactly how it is expected to work
  • Highly-coupled container-to-container communications
  • Pod-to-Pod communications
  • ...57 more annotations...
  • this is the primary focus of this document
    • 張 旭
      張 旭 on 27 Aug 21
       
      Cluster Networking 所關注處理的是： Pod 到 Pod 之間的連線
  • Pod-to-Service communications
  • External-to-Service communications
  • Kubernetes is all about sharing machines between applications.
  • sharing machines requires ensuring that two applications do not try to use the same ports.
  • Dynamic port allocation brings a lot of complications to the system
  • Every Pod gets its own IP address
  • do not need to explicitly create links between Pods
  • almost never need to deal with mapping container ports to host ports.
  • Pods can be treated much like VMs or physical hosts from the perspectives of port allocation, naming, service discovery, load balancing, application configuration, and migration.
  • pods on a node can communicate with all pods on all nodes without NAT
  • agents on a node (e.g. system daemons, kubelet) can communicate with all pods on that node
  • pods in the host network of a node can communicate with all pods on all nodes without NAT
  • If your job previously ran in a VM, your VM had an IP and could talk to other VMs in your project. This is the same basic model.
  • containers within a Pod share their network namespaces - including their IP address
  • containers within a Pod can all reach each other’s ports on localhost
  • containers within a Pod must coordinate port usage
  • “IP-per-pod” model.
  • request ports on the Node itself which forward to your Pod (called host ports), but this is a very niche operation
  • The Pod itself is blind to the existence or non-existence of host ports.
  • AOS is an Intent-Based Networking system that creates and manages complex datacenter environments from a simple integrated platform.
  • Cisco Application Centric Infrastructure offers an integrated overlay and underlay SDN solution that supports containers, virtual machines, and bare metal servers.
  • AOS Reference Design currently supports Layer-3 connected hosts that eliminate legacy Layer-2 switching problems.
  • The AWS VPC CNI offers integrated AWS Virtual Private Cloud (VPC) networking for Kubernetes clusters.
  • users can apply existing AWS VPC networking and security best practices for building Kubernetes clusters.
  • Using this CNI plugin allows Kubernetes pods to have the same IP address inside the pod as they do on the VPC network.
  • The CNI allocates AWS Elastic Networking Interfaces (ENIs) to each Kubernetes node and using the secondary IP range from each ENI for pods on the node.
  • Big Cloud Fabric is a cloud native networking architecture, designed to run Kubernetes in private cloud/on-premises environments.
  • Cilium is L7/HTTP aware and can enforce network policies on L3-L7 using an identity based security model that is decoupled from network addressing.
  • CNI-Genie is a CNI plugin that enables Kubernetes to simultaneously have access to different implementations of the Kubernetes network model in runtime.
  • CNI-Genie also supports assigning multiple IP addresses to a pod, each from a different CNI plugin.
  • cni-ipvlan-vpc-k8s contains a set of CNI and IPAM plugins to provide a simple, host-local, low latency, high throughput, and compliant networking stack for Kubernetes within Amazon Virtual Private Cloud (VPC) environments by making use of Amazon Elastic Network Interfaces (ENI) and binding AWS-managed IPs into Pods using the Linux kernel’s IPvlan driver in L2 mode.
  • to be straightforward to configure and deploy within a VPC
  • Contiv provides configurable networking
  • Contrail, based on Tungsten Fabric, is a truly open, multi-cloud network virtualization and policy management platform.
  • DANM is a networking solution for telco workloads running in a Kubernetes cluster.
  • Flannel is a very simple overlay network that satisfies the Kubernetes requirements.
  • Any traffic bound for that subnet will be routed directly to the VM by the GCE network fabric.
  • sysctl net.ipv4.ip_forward=1
  • Jaguar provides overlay network using vxlan and Jaguar CNIPlugin provides one IP address per pod.
  • Knitter is a network solution which supports multiple networking in Kubernetes.
  • Kube-OVN is an OVN-based kubernetes network fabric for enterprises.
  • Kube-router provides a Linux LVS/IPVS-based service proxy, a Linux kernel forwarding-based pod-to-pod networking solution with no overlays, and iptables/ipset-based network policy enforcer.
  • If you have a “dumb” L2 network, such as a simple switch in a “bare-metal” environment, you should be able to do something similar to the above GCE setup.
  • Multus is a Multi CNI plugin to support the Multi Networking feature in Kubernetes using CRD based network objects in Kubernetes.
  • NSX-T can provide network virtualization for a multi-cloud and multi-hypervisor environment and is focused on emerging application frameworks and architectures that have heterogeneous endpoints and technology stacks.
  • NSX-T Container Plug-in (NCP) provides integration between NSX-T and container orchestrators such as Kubernetes
  • Nuage uses the open source Open vSwitch for the data plane along with a feature rich SDN Controller built on open standards.
  • OpenVSwitch is a somewhat more mature but also complicated way to build an overlay network
  • OVN is an opensource network virtualization solution developed by the Open vSwitch community.
  • Project Calico is an open source container networking provider and network policy engine.
  • Calico provides a highly scalable networking and network policy solution for connecting Kubernetes pods based on the same IP networking principles as the internet
  • Calico can be deployed without encapsulation or overlays to provide high-performance, high-scale data center networking.
  • Calico can also be run in policy enforcement mode in conjunction with other networking solutions such as Flannel, aka canal, or native GCE, AWS or Azure networking.
  • Romana is an open source network and security automation solution that lets you deploy Kubernetes without an overlay network
  • Weave Net runs as a CNI plug-in or stand-alone. In either version, it doesn’t require any configuration or extra code to run, and in both cases, the network provides one IP address per pod - as is standard for Kubernetes.
  • The network model is implemented by the container runtime on each node.
張 旭

Installing kubeadm | Kubernetes - 0 views

kubernetes.io/...install-kubeadm

kubernetes

shared by 張 旭 on 02 Jun 21 - No Cached
  • Swap disabled. You MUST disable swap in order for the kubelet to work properly.
  • The product_uuid can be checked by using the command sudo cat /sys/class/dmi/id/product_uuid
  • some virtual machines may have identical values.
  • ...6 more annotations...
  • Kubernetes uses these values to uniquely identify the nodes in the cluster.
  • Make sure that the br_netfilter module is loaded.
  • you should ensure net.bridge.bridge-nf-call-iptables is set to 1 in your sysctl config,
  • kubeadm will not install or manage kubelet or kubectl for you, so you will need to ensure they match the version of the Kubernetes control plane you want kubeadm to install for you.
  • one minor version skew between the kubelet and the control plane is supported, but the kubelet version may never exceed the API server version.
  • Both the container runtime and the kubelet have a property called "cgroup driver", which is important for the management of cgroups on Linux machines.
1 - 8 of 8
Showing 20▼ items per page