Group items tagged

Pod-to-Service communications

External-to-Service communications

sharing machines requires ensuring that two applications do not try to use the same ports.

Dynamic port allocation brings a lot of complications to the system

do not need to explicitly create links between Pods

almost never need to deal with mapping container ports to host ports.

pods on a node can communicate with all pods on all nodes without NAT

agents on a node (e.g. system daemons, kubelet) can communicate with all pods on that node

pods in the host network of a node can communicate with all pods on all nodes without NAT

containers within a Pod share their network namespaces - including their IP address

containers within a Pod must coordinate port usage

“IP-per-pod” model.

request ports on the Node itself which forward to your Pod (called host ports), but this is a very niche operation

The Pod itself is blind to the existence or non-existence of host ports.

AOS is an Intent-Based Networking system that creates and manages complex datacenter environments from a simple integrated platform.

Cisco Application Centric Infrastructure offers an integrated overlay and underlay SDN solution that supports containers, virtual machines, and bare metal servers.

AOS Reference Design currently supports Layer-3 connected hosts that eliminate legacy Layer-2 switching problems.

The AWS VPC CNI offers integrated AWS Virtual Private Cloud (VPC) networking for Kubernetes clusters.

users can apply existing AWS VPC networking and security best practices for building Kubernetes clusters.

Using this CNI plugin allows Kubernetes pods to have the same IP address inside the pod as they do on the VPC network.

The CNI allocates AWS Elastic Networking Interfaces (ENIs) to each Kubernetes node and using the secondary IP range from each ENI for pods on the node.

Big Cloud Fabric is a cloud native networking architecture, designed to run Kubernetes in private cloud/on-premises environments.

Cilium is L7/HTTP aware and can enforce network policies on L3-L7 using an identity based security model that is decoupled from network addressing.

CNI-Genie is a CNI plugin that enables Kubernetes to simultaneously have access to different implementations of the Kubernetes network model in runtime.

CNI-Genie also supports assigning multiple IP addresses to a pod, each from a different CNI plugin.

cni-ipvlan-vpc-k8s contains a set of CNI and IPAM plugins to provide a simple, host-local, low latency, high throughput, and compliant networking stack for Kubernetes within Amazon Virtual Private Cloud (VPC) environments by making use of Amazon Elastic Network Interfaces (ENI) and binding AWS-managed IPs into Pods using the Linux kernel’s IPvlan driver in L2 mode.

to be straightforward to configure and deploy within a VPC

Contiv provides configurable networking

Contrail, based on Tungsten Fabric, is a truly open, multi-cloud network virtualization and policy management platform.

DANM is a networking solution for telco workloads running in a Kubernetes cluster.

Flannel is a very simple overlay network that satisfies the Kubernetes requirements.

Any traffic bound for that subnet will be routed directly to the VM by the GCE network fabric.

sysctl net.ipv4.ip_forward=1

Jaguar provides overlay network using vxlan and Jaguar CNIPlugin provides one IP address per pod.

Knitter is a network solution which supports multiple networking in Kubernetes.

Kube-OVN is an OVN-based kubernetes network fabric for enterprises.

Kube-router provides a Linux LVS/IPVS-based service proxy, a Linux kernel forwarding-based pod-to-pod networking solution with no overlays, and iptables/ipset-based network policy enforcer.

If you have a “dumb” L2 network, such as a simple switch in a “bare-metal” environment, you should be able to do something similar to the above GCE setup.

Multus is a Multi CNI plugin to support the Multi Networking feature in Kubernetes using CRD based network objects in Kubernetes.

NSX-T can provide network virtualization for a multi-cloud and multi-hypervisor environment and is focused on emerging application frameworks and architectures that have heterogeneous endpoints and technology stacks.

NSX-T Container Plug-in (NCP) provides integration between NSX-T and container orchestrators such as Kubernetes

Nuage uses the open source Open vSwitch for the data plane along with a feature rich SDN Controller built on open standards.

OpenVSwitch is a somewhat more mature but also complicated way to build an overlay network

OVN is an opensource network virtualization solution developed by the Open vSwitch community.

Project Calico is an open source container networking provider and network policy engine.

Calico provides a highly scalable networking and network policy solution for connecting Kubernetes pods based on the same IP networking principles as the internet

Calico can be deployed without encapsulation or overlays to provide high-performance, high-scale data center networking.

Romana is an open source network and security automation solution that lets you deploy Kubernetes without an overlay network

Weave Net runs as a CNI plug-in or stand-alone. In either version, it doesn’t require any configuration or extra code to run, and in both cases, the network provides one IP address per pod - as is standard for Kubernetes.

The network model is implemented by the container runtime on each node.

内网建立所谓的私库，作为代理与外网的公共库同步。

很难做到真正意义上的DevOps to Production

可视化是为了实时展现持续交付流水线执行情况与单元测试的执行报告

通过持续交付流水线串联自动化测试，在测试环境部署成功后触发自动化测试。

测试阶段也需要测试报告的可视化与结果通知

企业的持续交付流水线往往都打不通到生产环境

Service Desk不是某一款软件的名字，而是ITIL（信息技术基础架构库，可认为是ITSM的落地实现）里面承载变更管理与事件管理的工具统称。

构建底层的云平台，是整个DevOps基础架构的基石

架构不是一成不变的，而是应该随着实际需求变化而持续演化，能力也要跟着持续提升。

并行测试的执行环境通过PaaS平台按需自动生成，测试执行完毕后自动销毁。

即使是雷同的项目，在对编译构建上的一些细枝末节的差别也很可能导致它们的持续交付流水线设计非常不一样。

Serverless can also mean applications where some amount of server-side logic is still written by the application developer but unlike traditional architectures is run in stateless compute containers that are event-triggered, ephemeral (may only last for one invocation), and fully managed by a 3rd party.

‘Functions as a service

AWS Lambda is one of the most popular implementations of FaaS at present,

A good example is Auth0 - they started initially with BaaS ‘Authentication as a Service’, but with Auth0 Webtask they are entering the FaaS space.

a typical ecommerce app

a backend data-processing service

with zero administration.

FaaS offerings do not require coding to a specific framework or library.

Horizontal scaling is completely automatic, elastic, and managed by the provider

Functions in FaaS are triggered by event types defined by the provider.

from a deployment-unit point of view FaaS functions are stateless.

allowed the client direct access to a subset of our database

deleted the authentication logic in the original application and have replaced it with a third party BaaS service

The client is in fact well on its way to becoming a Single Page Application.

implement a FaaS function that responds to http requests via an API Gateway

port the search code from the Pet Store server to the Pet Store Search function

replaced a long lived consumer application with a FaaS function that runs within the event driven context

server applications - is a key difference when comparing with other modern architectural trends like containers and PaaS

the only code that needs to change when moving to FaaS is the ‘main method / startup’ code, in that it is deleted, and likely the specific code that is the top-level message handler (the ‘message listener interface’ implementation), but this might only be a change in method signature

With FaaS you need to write the function ahead of time to assume parallelism

Most providers also allow functions to be triggered as a response to inbound http requests, typically in some kind of API gateway

you should assume that for any given invocation of a function none of the in-process or host state that you create will be available to any subsequent invocation.

FaaS functions are either naturally stateless

certain classes of long lived task are not suited to FaaS functions without re-architecture

if you were writing a low-latency trading application you probably wouldn’t want to use FaaS systems at this time

An API Gateway is an HTTP server where routes / endpoints are defined in configuration and each route is associated with a FaaS function.

API Gateway will allow mapping from http request parameters to inputs arguments for the FaaS function

API Gateways may also perform authentication, input validation, response code mapping, etc.

the Serverless Framework makes working with API Gateway + Lambda significantly easier than using the first principles provided by AWS.

Apex - a project to ‘Build, deploy, and manage AWS Lambda functions with ease.'

'Serverless' to mean the union of a couple of other ideas - 'Backend as a Service' and 'Functions as a Service'.

A chart is organized as a collection of files inside of a directory.

values.yaml # The default configuration values for this chart

charts/ # A directory containing any charts upon which this chart depends.

version: A SemVer 2 version (required)

apiVersion: The chart API version, always "v1" (required)

Every chart must have a version number. A version must follow the SemVer 2 standard.

When generating a package, the helm package command will use the version that it finds in the Chart.yaml as a token in the package name.

the appVersion field is not related to the version field. It is a way of specifying the version of the application.

appVersion: The version of the app that this contains (optional). This needn't be SemVer.

If the latest version of a chart in the repository is marked as deprecated, then the chart as a whole is considered to be deprecated.

deprecated: Whether this chart is deprecated (optional, boolean)

one chart may depend on any number of other charts.

the preferred method of declaring dependencies is by using a requirements.yaml file inside of your chart.

A requirements.yaml file is a simple file for listing your dependencies.

The repository field is the full URL to the chart repository.

helm dependency update and it will use your dependency file to download all the specified charts into your charts/ directory for you.

When helm dependency update retrieves charts, it will store them as chart archives in the charts/ directory.

All charts are loaded by default.

The condition field holds one or more YAML paths (delimited by commas). If this path exists in the top parent’s values and resolves to a boolean value, the chart will be enabled or disabled based on that boolean value.

The tags field is a YAML list of labels to associate with this chart.

all charts with tags can be enabled or disabled by specifying the tag and a boolean value.

The --set parameter can be used as usual to alter tag and condition values.

The first condition path that exists wins and subsequent ones for that chart are ignored.

The keys containing the values to be imported can be specified in the parent chart’s requirements.yaml file using a YAML list. Each item in the list is a key which is imported from the child chart’s exports field.

specifying the key data in our import list, Helm looks in the exports field of the child chart for data key and imports its contents.

To access values that are not contained in the exports key of the child chart’s values, you will need to specify the source key of the values to be imported (child) and the destination path in the parent chart’s values (parent).

To drop a dependency into your charts/ directory, use the helm fetch command

A dependency can be either a chart archive (foo-1.2.3.tgz) or an unpacked chart directory.

a single release is created with all the objects for the chart and its dependencies.

When Helm renders the charts, it will pass every file in that directory through the template engine.

Chart users may supply a YAML file that contains values. This can be provided on the command line with helm install.

Template files follow the standard conventions for writing Go templates

{{default "minio" .Values.storage}}

Values that are supplied via a values.yaml file (or via the --set flag) are accessible from the .Values object in a template.

Release.Name: The name of the release (not the chart)

Release.IsUpgrade: This is set to true if the current operation is an upgrade or rollback.

Chart: The contents of the Chart.yaml

Files: A map-like object containing all non-special files in the chart.

Files can be accessed using {{index .Files "file.name"}} or using the {{.Files.Get name}} or {{.Files.GetString name}} functions.

access the contents of the file as []byte using {{.Files.GetBytes}}

Any unknown Chart.yaml fields will be dropped

Chart.yaml cannot be used to pass arbitrarily structured data into the template.

A values file is formatted in YAML.

A chart may include a default values.yaml file

accessible inside of templates using the .Values object

Values files can declare values for the top-level chart, as well as for any of the charts that are included in that chart’s charts/ directory.

Charts at a higher level have access to all of the variables defined beneath.

lower level charts cannot access things in parent charts

Values are namespaced, but namespaces are pruned.

Helm supports special “global” value.

a way of sharing one top-level variable with all subcharts, which is useful for things like setting metadata properties like labels.

global variables of parent charts take precedence over the global variables from subcharts.

helm lint

A chart repository is an HTTP server that houses one or more packaged charts

Any HTTP server that can serve YAML files and tar files and can answer GET requests can be used as a repository server.

Helm does not provide tools for uploading charts to remote repository servers.

the only way to add a chart to $HELM_HOME/starters is to manually copy it there.

Helm provides a hook mechanism to allow chart developers to intervene at certain points in a release’s life cycle.

Hooks are declared as an annotation in the metadata section of a manifest

pre-install

post-install: Executes after all resources are loaded into Kubernetes

pre-delete

post-delete: Executes on a deletion request after all of the release’s resources have been deleted.

pre-upgrade

post-upgrade

pre-rollback

post-rollback: Executes on a rollback request after all resources have been modified.

crd-install

test-success: Executes when running helm test and expects the pod to return successfully (return code == 0).

test-failure: Executes when running helm test and expects the pod to fail (return code != 0).

Hooks allow you, the chart developer, an opportunity to perform operations at strategic points in a release lifecycle

Tiller then loads the hook with the lowest weight first (negative to positive)

Tiller returns the release name (and other data) to the client

If the resources is a Job kind, Tiller will wait until the job successfully runs to completion.

good practice to add a hook weight, and set it to 0 if weight is not important.

leave the hook resource alone.

To destroy such resources, you need to either write code to perform this operation in a pre-delete or post-delete hook or add "helm.sh/hook-delete-policy" annotation to the hook template file.

Hooks are just Kubernetes manifest files with special annotations in the metadata section

One resource can implement multiple hooks

no limit to the number of different resources that may implement a given hook.

Hook weights can be positive or negative numbers but must be represented as strings.

sort those hooks in ascending order.

Hook deletion policies

"before-hook-creation" specifies Tiller should delete the previous hook before the new hook is launched.

By default Tiller will wait for 60 seconds for a deleted hook to no longer exist in the API server before timing out.

Custom Resource Definitions (CRDs) are a special kind in Kubernetes.

The crd-install hook is executed very early during an installation, before the rest of the manifests are verified.

A common reason why the hook resource might already exist is that it was not deleted following use on a previous install/upgrade.

Helm uses Go templates for templating your resource files.

two special template functions: include and required

include function allows you to bring in another template, and then pass the results to other template functions.

The required function allows you to declare a particular values entry as required for template rendering.

Quote Strings, Don’t Quote Integers

when working with integers do not quote the values

env variables values which are expected to be string

to include a template, and then perform an operation on that template’s output, Helm has a special include function

The above includes a template called toYaml, passes it $value, and then passes the output of that template to the nindent function.

Go provides a way for setting template options to control behavior when a map is indexed with a key that’s not present in the map

The required function gives developers the ability to declare a value entry as required for template rendering.

The tpl function allows developers to evaluate strings as templates inside a template.

Rendering a external configuration file

(.Files.Get "conf/app.conf")

Image pull secrets are essentially a combination of registry, username, and password.

Automatically Roll Deployments When ConfigMaps or Secrets change

configmaps or secrets are injected as configuration files in containers

a restart may be required should those be updated with a subsequent helm upgrade

The sha256sum function can be used to ensure a deployment’s annotation section is updated if another file changes

helm upgrade --recreate-pods

"helm.sh/resource-policy": keep

resources that should not be deleted when Helm runs a helm delete

create some reusable parts in your chart

In the templates/ directory, any file that begins with an underscore(_) is not expected to output a Kubernetes manifest file.

The current best practice for composing a complex application from discrete parts is to create a top-level umbrella chart that exposes the global configurations, and then use the charts/ subdirectory to embed each of the components.

SAP’s Converged charts: These charts install SAP Converged Cloud a full OpenStack IaaS on Kubernetes. All of the charts are collected together in one GitHub repository, except for a few submodules.

Deis’s Workflow: This chart exposes the entire Deis PaaS system with one chart. But it’s different from the SAP chart in that this umbrella chart is built from each component, and each component is tracked in a different Git repository.

YAML is a superset of JSON

any valid JSON structure ought to be valid in YAML.

As a best practice, templates should follow a YAML-like syntax unless the JSON syntax substantially reduces the risk of a formatting issue.

There are functions in Helm that allow you to generate random data, cryptographic keys, and so on.

a chart repository is a location where packaged charts can be stored and shared.

A chart repository is an HTTP server that houses an index.yaml file and optionally some packaged charts.

Because a chart repository can be any HTTP server that can serve YAML and tar files and can answer GET requests, you have a plethora of options when it comes down to hosting your own chart repository.

It is not required that a chart package be located on the same server as the index.yaml file.

A valid chart repository must have an index file. The index file contains information about each chart in the chart repository.

The Helm project provides an open-source Helm repository server called ChartMuseum that you can host yourself.

$ helm repo index fantastic-charts --url https://fantastic-charts.storage.googleapis.com

A repository will not be added if it does not contain a valid index.yaml

add the repository to their helm client via the helm repo add [NAME] [URL] command with any name they would like to use to reference the repository.

Helm has provenance tools which help chart users verify the integrity and origin of a package.

Integrity is established by comparing a chart to a provenance record

The provenance file contains a chart’s YAML file plus several pieces of verification information

Chart repositories serve as a centralized collection of Helm charts.

Chart repositories must make it possible to serve provenance files over HTTP via a specific request, and must make them available at the same URI path as the chart.

We don’t want to be “the certificate authority” for all chart signers. Instead, we strongly favor a decentralized model, which is part of the reason we chose OpenPGP as our foundational technology.

The Keybase platform provides a public centralized repository for trust information.

A chart contains a number of Kubernetes resources and components that work together.

A test in a helm chart lives under the templates/ directory and is a pod definition that specifies a container with a given command to run.

The pod definition must contain one of the helm test hook annotations: helm.sh/hook: test-success or helm.sh/hook: test-failure

helm test

nest your test suite under a tests/ directory like <chart-name>/templates/tests/