How To Refinish A Vinyl Or Tile Foor Utilizing Floor Finish. - 0 views

• 
  #1 Gardner Munck on 10 May 13

   

  The following procedure is for reapplying coats to an currently finished floor or applying finish to a new floor. When finishing a new floor usually stick to the producers concrete stains recommendations for prepping the floor. You should often consult the flooring manufacturer on the types of finishes that are suited to your floor. When finishing any floor we advise that you use a good quality floor finish that is appropriately matched to your flooring. Our online floor finishing procedures are the basic guidelines for finishing a floor. These days floor finish has turn out to be the option to old fashioned waxes. Floor finish can give a floor a excellent lengthy lasting shine without having the troubles of standard waxes.
  
  Procedure:
  
  Make confident that your floor has been prepared for finishing. Clean the floor removing as considerably dirt and debris as attainable. If the floor has much more than five coats of finish we recommend stripping the floor first. As well several layers of finish can dull a floor. More than time floor finish can yellow in color, if you see any yellowing on the floor we also advocate that you strip the floor very first.
  
  After the floor has been ready, vacuum or dust mop the floor to eliminate any dust. We advocate that you spray your dust mop with dust mop therapy to eliminate as much dust as feasible. Make sure to take away something stuck to the floor, something that is on the floor when you finish it will become element of the floor finish and you will concrete flooring have to strip your floor and start once again.
  
  Make sure that the floor are you are finishing does not and will not have traffic moving through it for at least 12 - 24 hours depending on the variety of finish that your are applying (see floor finish manufacturers specifications for curing and drying time). Use warning signs to make sure the region where you are finishing is marked out so that every person is conscious of the area.
  
  Finishing a floor calls for the use of two mop buckets. 1 bucket will be employed to hold the finish mop damp and the other will be employed to apply the floor finish. Line the floor finish bucket with a clear trash can liner so that you can dispose of the finish effortlessly after the job is total.
  
  Fill 1 mop bucket 1/2 way up with water and the lined mop bucket 1/four full with floor finish. Dip your finish mop into the water bucket and wring till the mop is damp and water does not drip from the finish. Subsequent, dip the damp mop into the floor finish and wring until the finish mop does not drip.
  
  The very best way to finish floors is to divide the floor into sections to assure that an even quantity of floor finish is applied everywhere. Begin applying the floor finish at the furthest corner from the entrance. Apply floor finish to the baseboard region initial (a block applicator can be a fantastic tool for this job) working away from the corner. Make confident the floor finish is going on to the floor in a thin even coat.
  
  Following you have applied floor finish to the baseboard move on to the open locations of the floor. Move the mop head in a figure eight motion overlapping mopping sections by about an inch.
  
  Following you have applied the finish evenly to the whole region, let the floor dry. The floor must appear glossy with no raised places or drip marks. Comply with the floor finish companies suggestions for drying time. Depending on the floor finish you might wish to apply a lot more than one coat concrete coatings of floor finish, if so, let the floor dry in among coats. You may possibly also want to buff the floor in amongst coats so that the second coat adheres far better to the initial coat.
  
  To keep the new appear of the floor finish you can burnish with a burnishing floor pad, once again see the companies recommendations for maintenance on your floor.
  
  Soon after 12 hours your floor ought to be totally cured. Floor visitors can now resume.

   

  <div class="cArrow"> </div><div class="cContentInner">The following procedure is for reapplying coats to an currently finished floor or applying finish to a new floor. When finishing a new floor usually stick to the producers <a rel="nofollow" href="http://www.hpspartacote.com/">concrete stains</a> recommendations for prepping the floor. You should often consult the flooring manufacturer on the types of finishes that are suited to your floor. When finishing any floor we advise that you use a good quality floor finish that is appropriately matched to your flooring. Our online floor finishing procedures are the basic guidelines for finishing a floor. These days floor finish has turn out to be the option to old fashioned waxes. Floor finish can give a floor a excellent lengthy lasting shine without having the troubles of standard waxes. <br /> <br /> Procedure: <br /> <br /> Make confident that your floor has been prepared for finishing. Clean the floor removing as considerably dirt and debris as attainable. If the floor has much more than five coats of finish we recommend stripping the floor first. As well several layers of finish can dull a floor. More than time floor finish can yellow in color, if you see any yellowing on the floor we also advocate that you strip the floor very first. <br /> <br /> After the floor has been ready, vacuum or dust mop the floor to eliminate any dust. We advocate that you spray your dust mop with dust mop therapy to eliminate as much dust as feasible. Make sure to take away something stuck to the floor, something that is on the floor when you finish it will become element of the floor finish and you will <a rel="nofollow" href="http://www.hpspartacote.com/">concrete flooring</a> have to strip your floor and start once again. <br /> <br /> Make sure that the floor are you are finishing does not and will not have traffic moving through it for at least 12 - 24 hours depending on the variety of finish that your are applying (see floor finish manufacturers specifications for curing and drying time). Use warning signs to make sure the region where you are finishing is marked out so that every person is conscious of the area. <br /> <br /> Finishing a floor calls for the use of two mop buckets. 1 bucket will be employed to hold the finish mop damp and the other will be employed to apply the floor finish. Line the floor finish bucket with a clear trash can liner so that you can dispose of the finish effortlessly after the job is total. <br /> <br /> Fill 1 mop bucket 1/2 way up with water and the lined mop bucket 1/four full with floor finish. Dip your finish mop into the water bucket and wring till the mop is damp and water does not drip from the finish. Subsequent, dip the damp mop into the floor finish and wring until the finish mop does not drip. <br /> <br /> The very best way to finish floors is to divide the floor into sections to assure that an even quantity of floor finish is applied everywhere. Begin applying the floor finish at the furthest corner from the entrance. Apply floor finish to the baseboard region initial (a block applicator can be a fantastic tool for this job) working away from the corner. Make confident the floor finish is going on to the floor in a thin even coat. <br /> <br /> Following you have applied floor finish to the baseboard move on to the open locations of the floor. Move the mop head in a figure eight motion overlapping mopping sections by about an inch. <br /> <br /> Following you have applied the finish evenly to the whole region, let the floor dry. The floor must appear glossy with no raised places or drip marks. Comply with the floor finish companies suggestions for drying time. Depending on the floor finish you might wish to apply a lot more than one coat <a rel="nofollow" href="http://www.hpspartacote.com/products">concrete coatings</a> of floor finish, if so, let the floor dry in among coats. You may possibly also want to buff the floor in amongst coats so that the second coat adheres far better to the initial coat. <br /> <br /> To keep the new appear of the floor finish you can burnish with a burnishing floor pad, once again see the companies recommendations for maintenance on your floor. <br /> <br /> Soon after 12 hours your floor ought to be totally cured. Floor visitors can now resume.</div>

  ...

  Cancel

To Top