What Are Corning (Siecor) Unicam Connectors? Fiber Optic Tutorial Series A single - 0 views

• 
  #1 Brandt Mangum on 24 Sep 13

   

  For regular epoxy and polish fiber optic connectors, the termination process generally contains 7 steps (up to 30 minutes) which are:
  
  1. Verizon Bundle Deals contains further concerning the reason for this belief. Strip the optical fiber to expose the 125um (140um or other sizes depending on your fiber) fiber cladding
  
  2. Clean the exposed bare fiber with isopropyl alcohol and lint-totally free wipes
  
  three. Insert the bare fiber into the connector center hole till ..
  
  The termination procedure for sector normal epoxy and polish fiber optic connectors.
  
  For common epoxy and polish fiber optic connectors, the termination method usually consists of 7 steps (up to 30 minutes) which are:
  
  1. Strip the optical fiber to expose the 125um (140um or other sizes depending on your fiber) fiber cladding
  
  2. Clean the exposed bare fiber with isopropyl alcohol and lint-free of charge wipes
  
  three. Insert the bare fiber into the connector center hole until the fiber stops
  
  4. Inject fiber optic epoxy with a syringe dispenser into the connector body
  
  five. Cure the fiber optic epoxy with high temperature which could be 85C, 100C or even 120C based on the sort of fiber optic epoxy(you need to have a specific connector epoxy curing oven for this objective)
  
  6. To discover additional information, please check-out: http://www.threadless.com/profile/2764284/lockpencil04. Scribe the fiber protruding from the tip of the fiber connector
  
  7. Polish the connector tip with lapping films either by hand or specialized fiber optic connector polishing machine(specially for single mode fiber connectors)
  
  So you see that the procedure for terminating optical fiber is a complicated process. It takes time and practice and only very educated fiber optic technicians can do the operate properly with high yield ratio.
  
  But fiber optic contractor installers for premise networks generally do not have the luxury of time or the expensive tools for this sort of termination. And that is when fast termination fiber optic connectors come into handy.
  
  Rapid termination fiber optic connectors are specially created for quick termination without having lots of knowledge needed. A fiber optic contractor installer can do a quick termination within 2~3 minutes.
  
  There are several different styles but the typical a single such as Corning Siecor Unicam connector is like this:
  
  The Unicam connector is pre-polished in factory with a fiber stub hidden inside the body of the connector. To explore more, we recommend you check-out: verizon double play phone and internet. The installer then only requirements five steps to full a Unicam connector termination with industry common high quality.
  
  1. Strip the optical fiber to expose the 125um fiber cladding
  
  two. Clean the exposed bare fiber with isopropyl alcohol and lint-free of charge wipes
  
  three. I found out about go here for more info by searching Bing. Cleave the fiber with a cleaver
  
  4. Insert the fiber into the Unicam connector until it stops
  
  5. Crimp the fiber onto the Unicam connector with a fiber connector crimper tool
  
  A fiber optic contractor installer can make a Unicam connector termination inside two minutes. Compared to the standard epoxy strategy (up to 30 minutes), that is 87% time saved.
  
  Unicam connectors provide equivalent insertion loss efficiency as a normal epoxy and polish connector. Unicam connectors also meet or exceed the mechanical and optical efficiency specified by EIA/TIA 568.B.
  
  Fiber Optic For Sale Co stocks all kinds of Corning Siecor Unicam connectors which includes Unicam ST, TKT Unicam CTS SF, Corning TKT Unicam, Unicam LC, Unicam SC, Unicam tool kit and TKT Unicam Elite.

   

  <div class="cArrow"> </div><div class="cContentInner">For regular epoxy and polish fiber optic connectors, the termination process generally contains 7 steps (up to 30 minutes) which are: <br /> <br /> 1. <a rel="nofollow" href="http://www.mydzkj.com/house-locators-or-apartment-database-websites-that-will-be-the-best-for-you/">Verizon Bundle Deals</a> contains further concerning the reason for this belief. Strip the optical fiber to expose the 125um (140um or other sizes depending on your fiber) fiber cladding <br /> <br /> 2. Clean the exposed bare fiber with isopropyl alcohol and lint-totally free wipes <br /> <br /> three. Insert the bare fiber into the connector center hole till .. <br /> <br /> The termination procedure for sector normal epoxy and polish fiber optic connectors. <br /> <br /> For common epoxy and polish fiber optic connectors, the termination method usually consists of 7 steps (up to 30 minutes) which are: <br /> <br /> 1. Strip the optical fiber to expose the 125um (140um or other sizes depending on your fiber) fiber cladding <br /> <br /> 2. Clean the exposed bare fiber with isopropyl alcohol and lint-free of charge wipes <br /> <br /> three. Insert the bare fiber into the connector center hole until the fiber stops <br /> <br /> 4. Inject fiber optic epoxy with a syringe dispenser into the connector body <br /> <br /> five. Cure the fiber optic epoxy with high temperature which could be 85C, 100C or even 120C based on the sort of fiber optic epoxy(you need to have a specific connector epoxy curing oven for this objective) <br /> <br /> 6. To discover additional information, please check-out: <a rel="nofollow" href="http://www.threadless.com/profile/2764284/lockpencil04">http://www.threadless.com/profile/2764284/lockpencil04</a>. Scribe the fiber protruding from the tip of the fiber connector <br /> <br /> 7. Polish the connector tip with lapping films either by hand or specialized fiber optic connector polishing machine(specially for single mode fiber connectors) <br /> <br /> So you see that the procedure for terminating optical fiber is a complicated process. It takes time and practice and only very educated fiber optic technicians can do the operate properly with high yield ratio. <br /> <br /> But fiber optic contractor installers for premise networks generally do not have the luxury of time or the expensive tools for this sort of termination. And that is when fast termination fiber optic connectors come into handy. <br /> <br /> Rapid termination fiber optic connectors are specially created for quick termination without having lots of knowledge needed. A fiber optic contractor installer can do a quick termination within 2~3 minutes. <br /> <br /> There are several different styles but the typical a single such as Corning Siecor Unicam connector is like this: <br /> <br /> The Unicam connector is pre-polished in factory with a fiber stub hidden inside the body of the connector. To explore more, we recommend you check-out: <a rel="nofollow" href="http://blogs.rediff.com/latexnic0/2013/09/20/copywriting-within-your-e-mail-campaign/">verizon double play phone and internet</a>. The installer then only requirements five steps to full a Unicam connector termination with industry common high quality. <br /> <br /> 1. Strip the optical fiber to expose the 125um fiber cladding <br /> <br /> two. Clean the exposed bare fiber with isopropyl alcohol and lint-free of charge wipes <br /> <br /> three. I found out about <a rel="nofollow" href="http://www.feedbooks.com/user/995830/profile">go here for more info</a> by searching Bing. Cleave the fiber with a cleaver <br /> <br /> 4. Insert the fiber into the Unicam connector until it stops <br /> <br /> 5. Crimp the fiber onto the Unicam connector with a fiber connector crimper tool <br /> <br /> A fiber optic contractor installer can make a Unicam connector termination inside two minutes. Compared to the standard epoxy strategy (up to 30 minutes), that is 87% time saved. <br /> <br /> Unicam connectors provide equivalent insertion loss efficiency as a normal epoxy and polish connector. Unicam connectors also meet or exceed the mechanical and optical efficiency specified by EIA/TIA 568.B. <br /> <br /> Fiber Optic For Sale Co stocks all kinds of Corning Siecor Unicam connectors which includes Unicam ST, TKT Unicam CTS SF, Corning TKT Unicam, Unicam LC, Unicam SC, Unicam tool kit and TKT Unicam Elite.</div>

  ...

  Cancel

To Top