Group items tagged

With Many Years' Wholesale Foam Roller Export Experiences, Our customized EVA/EPE Foam Roller has been welcomed in international markets. Welcome, contact us!

The production of square/rectangular pipes adopts the combined roller. The roller position will be adjusted by spacer and motor adjustment to realize one set of the roller to apply for different size of pipe. The square or rectangular shaping is formed out before the tube welding, with important advantages in terms of power and material cost reduction.

The material on the surface of the Anti crash highway safety roller barrier is similar to sponge, and the support shaft of the bucket center ensures that it can rotate freely.

The components of the equipment of Metal roller shutter door roll forming machine: Decoiler 1set Main Machine for roll forming 1set Cutting System 1set Hydraulic Station 1 set Electric Control System（PLC）1 set Output Table 1set

The safety roller barrier adopts "one post with 4 columns", which can effectively prevent the car from passing the barrier and drive out of the road by strengthening the performance and installation of columns and guardrails. It's pioneering adopts a rotating structure, pillar the elastic and anti-collision rotation barrels on the post support,

According to the difference of the processing mode, the galvanized fall into cold galvanized and hot galvanized. Normally, the highway guardrail is hot galvanized products.The difference between hot galvanizing and cold galvanizing:

The door frame roll forming equipment is a typical roll forming machine for our company with its advantage technical and high quality. So the shutter manufacturing equipment is welcomed by our customers.

1. Before the formal production, the dust and dirt and other foreign matter on the surface of the equipment and the coil should be carefully cleaned to keep the equipment and the ground floor and articles clean. At the same time, all rollers on the guide road which the strip passes should be carefully cleaned. When necessary, it needs to be polished with sandpaper and then wiped clean with alcohol to ensure that the surface of the finished product is free from scratch and other defects caused by this process.