Group items tagged

SINOFLOC superabsorbent polymers (known as SAP) are water-insoluble polymer, cross-linked copolymer of acrylic acid. It is in the form of white, odourless granules. This water-absorbing polymer is produced by acrylic acid and a cross-liner solution through polymerization.

The Cationic Polymer Uses in Water Treatment With the increasing demand for water resources, the recovery and reuse of municipal wastewater are very important. Cationic flocculant is a non-toxic and effective cationic polymer in water treatment in a wide range of pH. They can be used specifically for negatively charged wastewater. Cationic polyelectrolyte water treatment is indeed an effective and cost-saving method. Their uses are as follows: 1. Sludge dewatering According to the properties of the sludge, the corresponding products of our company can be selected, which can effectively carry out gravity sludge dewatering before the sludge enters the pressure filtration. When dewatering, it produces large flocs, which are non-stick filter cloth and do not stray during the filter press. The dosage is less, the dehydration efficiency is high, and the water content of the mud cake is below 80%. 2. The treatment of sewage and organic wastewater The product shows positive electricity in the acid or alkaline medium. It is very effective to flocculate and precipitate the wastewater with negative charge of suspended particles in the sewage. For example, to deal with wastewater from the alcohol factory, the brewery, the MSG factory, the sugar factory, the meat plant, the beverage factory, the textile printing and dyeing plant. The effect of cationic treatment chemicals is several times or tens of times higher than that of other polymers, because such wastewater generally carries negative charges. 3. The water treatment of waterworks The product has the characteristics of less dosage, good effect and low cost. It is better to use in combination with inorganic flocculant. For the optimum performance in specific applications of cationic polymer in water treatment, please consult the SINOFLOC team. We will provide you with the best service. We can also offer kinds of anionic polymer for sale, anything you need, please contact us.

SINOFLOC superabsorbent polymers (known as SAP) are water-insoluble polymer, cross-linked copolymer of acrylic acid. It is in the form of white, odourless granules. This water-absorbing polymer is produced by acrylic acid and a cross-liner solution through polymerization. This product has the character of superabsorbent which makes this material could absorb and retain water of hundreds of times of its weight shortly. Moreover, this product is able to hold absorbed water even against pressure.

SINOFLOC super absorbent polymer china (known as SAP) are water-insoluble polymer, cross-linked copolymer of acrylic acid. It is in the form of white, odourless granules. This water-absorbing polymer is produced by acrylic acid and a cross-liner solution through polymerization. This product has the character of superabsorbent which makes this material could absorb and retain water of hundreds of times of its weight shortly. Moreover, this product is able to hold absorbed water even against pressure.

SINOFLOC nonionic flocculants are high and very high molecular weight nonionic polyacrylamide polymers, in dry powder character. Our products have been specially designed for the industrial wastewater treatment process including paper, textile, and food industry and produced water from the oil industry, especially for the water with lower PH 1-3.

Anionic Flocculants SINOFLOC anionic flocculants are co-polymers of acrylamide with increasing proportions of acrylate groups, which give the polymers negative charges, and thus anionic active character, in aqueous solution.

The Anti-swelling Mechanism of PolyDADMAC PolyDADMAC is a cationic polymer with a number of N+ perssad in its molecular structure, and the N+ perssad can exchange with the low valence cation in the clay lattice, which makes clay particles not easy to be hydrated, expand, and be transported, so it is a good organic anti-swelling agent for clay. At the same time, the compound of cationic polymer polydadmac with inorganic clay anti-swelling agents will make them complementary to each other and play a synergistic effect.

GOLOHO POLYMER was established in 1995 which is the leading conglomerate in China specialized in industrial adhesive R&D and production. Our main products are organic silicone adhesive, silicone resin, epoxy resin and PU.

GOLOHO POLYMER was established in 1995 which is the leading conglomerate in China specialized in industrial adhesive R&D and production. Our main products are organic silicone adhesive, silicone resin, epoxy resin and PU.

GOLOHO POLYMER was established in 1995 which is the leading conglomerate in China specialized in industrial adhesive R&D and production. Our main products are organic silicone adhesive, silicone resin, epoxy resin and PU.

GOLOHO POLYMER was established in 1995 which is the leading conglomerate in China specialized in industrial adhesive R&D and production. Our main products are organic silicone adhesive, silicone resin, epoxy resin and PU.

GOLOHO POLYMER was established in 1995 which is the leading conglomerate in China specialized in industrial adhesive R&D and production. Our main products are organic silicone adhesive, silicone resin, epoxy resin and PU.

The solutions of SINOFLOC anionic polymers must be prepared in suitable plants equipped with dry powder feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC anionic polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a "maturation" time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration of anionic powder polyacrylamide polymer is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on anionic polymer, please consult with SINOFLOC team.

The Application of PolyDADMAC in Papermaking As a kind of water-soluble cationic polymer, PolyDADMAC has the advantages of the high density of positive charges, good water solubility, controllable molecular weight, high efficiency, no toxic, and low cost, therefore it is widely used in oil drilling, paper making, mining, textile printing and dyeing, daily-use chemical industry, sterilization, metal anti-corrosion, water treatment, and other fields. PolyDADMAC is mainly used as the standard titrant, anionic capture, and flocculant in the papermaking industry, and it can also be used in the production of conductive paper. . Used as a standard titrant With medium molecular weight and charge density, PolyDADMAC has become the standard cationic polymer in general use. However, it can only be applied when the ionic strength of the solution is low and the charge density of the measured polyelectrolyte is not too low. When the existing metal ion concentration exceeds a certain range, it is advisable to use a cationic polymer labeled with a chromogenic group for titration.

The organosilicon resin is a highly crosslinked poly-siloxane with a reticular structure. Organosilicon resin can be combined with organic polymers to enhance thermal stability, weatherability, high temperature resistance and other properties. Organosilicon resin and modified organosilicon resin product have excellent thermal oxidation stability, electrical insulation, weather resistance

SINOFLOC offer a wide range of powder cationic polyacrylamide, as well as coagulants, to be used on paper mills and wastewater treatment plant. Our polymers are suitable for the functions of different types of paper production:

SINOFLOC has a complete range of water-soluble polymers specifically designed to handle all the problems occurring in the wet end stages of the paper-making process:

The part molding by 2K Mould has been recognized by more and more people because it is superior to traditional injection-good structures and appearances. 2K or 'two-shot' injection moulding consists of processing two different polymers (or two different colors of one polymer) into an end product by means of one injection moulding process.