Mountain and road bike tire analysis and solutions - 1 views

• 
  #1 mo xiaoxiao on 24 Aug 13

   

  Outings often have a puncture happening so often to others to do the misconception that exercise bikes are not strong enough. In fact, this is just a problem of probability. Because the same time, exercise bikes from the ordinary bicycle exercise several times, therefore, only for this reason, the probability is increased several times. In addition, because the scope of the main activities of sports cars are the outskirts, on the outskirts of the city roads like roads are cleaned, so the foreign body more. There is a misunderstanding, a lot of people think that the thinner tires more easily burst. sleeveless cycling jersey In actual fact, the thinner tires tire pressure is higher, the higher the tire pressure, the less likely a puncture. I returned in the following detailed description. To some extent, directly related to puncture and luck. According to the popular saying that RPWT.
  

  Recently our activities between tire rolling tire problems occur frequently, some measures must be taken: 1: bathing incense before the event, devout prayers. 2: Another take some technical measures. Technical measures. Tube problems generally have four cases: from the outside, punctured, broken by stones or step nibbling, burst from the inside, slow leak.

  
  

  Rolling tires on the first case of preventive measures: 1, gas dozen feet, must take the gas enough to fight, if there barometer pump, please hit close to the tire pressure indicated on the figure. No barometer, then use your fingers to feel. In general, you want to hit the road bike completely pinching with your fingers do not move Tire (big man's hand). Mountain bike can be brought down, pinching, but pinching up very, very hard. High tire pressure for good obviously, hard tires, a lot of sharp stones, broken glass and the like will be bounced after hit, but can not tie into it. Greatly reducing the chance of being pierced. (2) When a rest stop, pay attention to check the tire to see if there broken glass, small iron pieces, like stones embedded in the tire, and advance clean. These things may temporarily not punctured, but the riding speed and distance make them deeper and deeper, until punctured inner tube. 3. Cycling depends on road, on the road to escape something suspicious. In addition, as close to the middle of the road to walk, what more ordinary glass iron plates on the roadside.

  
  

  On the second case, nibbling broken: the only reason for this situation is the lack of tire pressure, so the tire is too soft, and then nibbling on hard objects when there is not enough support force, led tube pushed to the rims, the rims on scraped. Precautions ibid: playing enough air, see more road.

  
  

  Third, this situation is usually because the burst tire mat issue. One is unable to withstand high pressure tires cushion, too inward deformation or rupture, resulting in tube burst inward. The second is no good pad cushion tires, has been moved, causing the holes on the rim and tubeless direct contact with high pressure burst.cycling bandanas  Solution, selection can withstand tire pressure pad. If the tire mat narrow, easy to slide, then first with 3M tape or something wrapped around the inside of the rim again, to cover all of the holes. They can also increase the friction pad tire, reducing the possibility of slippage.

  
  

  Fourth, slow leak This situation is generally tube quality issues. Before installing tube cheer to check in advance. Carry out the spare tire should be checked in advance. Especially made tires, to be more careful. Slow leak generally occurs in the gas Zuier place, which is to focus on examination of the place.

  
  

  In addition to the above, there is a situation that is after a puncture, just for good tube, but soon discovered leak. There are two possibilities, one punctured tubeless tire on things still left in the. Precautionary approach, when the tire tread carefully checked for broken tire mold carefully position to hand over the inside, make sure that no foreign objects. Another possibility is to install the tire when the tire pry bar crowded broken tube. Prevention methods, and worked hard to change the tire technologies.

   

  <div class="cArrow"> </div><div class="cContentInner">Outings often have a puncture happening so often to others to do the misconception that exercise bikes are not strong enough. In fact, this is just a problem of probability. Because the same time, exercise bikes from the ordinary bicycle exercise several times, therefore, only for this reason, the probability is increased several times. In addition, because the scope of the main activities of sports cars are the outskirts, on the outskirts of the city roads like roads are cleaned, so the foreign body more. There is a misunderstanding, a lot of people think that the thinner tires more easily burst. <a href="http://www.cycling-wear.com/cycling-jerseys-1/short-sleeveless.html" rel="nofollow"><strong>sleeveless cycling jersey</strong></a> In actual fact, the thinner tires tire pressure is higher, the higher the tire pressure, the less likely a puncture. I returned in the following detailed description. To some extent, directly related to puncture and luck. According to the popular saying that RPWT. <br /> <p>Recently our activities between tire rolling tire problems occur frequently, some measures must be taken: 1: bathing incense before the event, devout prayers. 2: Another take some technical measures. Technical measures. Tube problems generally have four cases: from the outside, punctured, broken by stones or step nibbling, burst from the inside, slow leak.</p> <br /> <p>Rolling tires on the first case of preventive measures: 1, gas dozen feet, must take the gas enough to fight, if there barometer pump, please hit close to the tire pressure indicated on the figure. No barometer, then use your fingers to feel. In general, you want to hit the road bike completely pinching with your fingers do not move Tire (big man's hand). Mountain bike can be brought down, pinching, but pinching up very, very hard. High tire pressure for good obviously, hard tires, a lot of sharp stones, broken glass and the like will be bounced after hit, but can not tie into it. Greatly reducing the chance of being pierced. (2) When a rest stop, pay attention to check the tire to see if there broken glass, small iron pieces, like stones embedded in the tire, and advance clean. These things may temporarily not punctured, but the riding speed and distance make them deeper and deeper, until punctured inner tube. 3. Cycling depends on road, on the road to escape something suspicious. In addition, as close to the middle of the road to walk, what more ordinary glass iron plates on the roadside.</p> <br /> <p>On the second case, nibbling broken: the only reason for this situation is the lack of tire pressure, so the tire is too soft, and then nibbling on hard objects when there is not enough support force, led tube pushed to the rims, the rims on scraped. Precautions ibid: playing enough air, see more road.</p> <br /> <p>Third, this situation is usually because the burst tire mat issue. One is unable to withstand high pressure tires cushion, too inward deformation or rupture, resulting in tube burst inward. The second is no good pad cushion tires, has been moved, causing the holes on the rim and tubeless direct contact with high pressure burst.<a href="http://www.cycling-wear.com/cycling-accessories/cycling-bandanas.html" rel="nofollow"><strong>cycling bandanas</strong></a>  Solution, selection can withstand tire pressure pad. If the tire mat narrow, easy to slide, then first with 3M tape or something wrapped around the inside of the rim again, to cover all of the holes. They can also increase the friction pad tire, reducing the possibility of slippage.</p> <br /> <p>Fourth, slow leak This situation is generally tube quality issues. Before installing tube cheer to check in advance. Carry out the spare tire should be checked in advance. Especially made tires, to be more careful. Slow leak generally occurs in the gas Zuier place, which is to focus on examination of the place.</p> <br /> <p>In addition to the above, there is a situation that is after a puncture, just for good tube, but soon discovered leak. There are two possibilities, one punctured tubeless tire on things still left in the. Precautionary approach, when the tire tread carefully checked for broken tire mold carefully position to hand over the inside, make sure that no foreign objects. Another possibility is to install the tire when the tire pry bar crowded broken tube. Prevention methods, and worked hard to change the tire technologies.</p></div>

  ...

  Cancel

To Top