Group items tagged

Oil Well Drilling Glass Beads Glass Beads can be used in all water and oil based drilling fluids to reduce torque and drag and to aid in the prevention of differential sticking. They should have no measurable effect on the desired properties of the mud system and can be removed by a desilter or centrifuge. Adding and maintaining 8.0-12.0 kg/m³ of Glass Beads can achieve a reduction in torque and drag anywhere from 15.0 to 30.0%. The severity of hole problems and solids content will determine actual concentrations required.

The raw material of the glass beads is glass sand, which is fused into a spherical shape by high temperature suspension and then annealed to eliminate internal stress and prevent breakage. This transparent, clear spherical structure product does not have particles embedded in the workpiece during use, contaminating the workpiece or causing other damage. Using different sizes of abrasives and different operating parameters, the glass beads will have a special decorative effect by selective localized controlled blasting on the surface of the workpiece.

Crushed Glass Our crushed glass chips & granule are made by the recycled glass rocks.It is lighter in weight, it has the hardness of glass bead, and its sharp, angular grains produce a very clean bright finish. They are insulation and can absorb the sun's rays then reflect it back into the air, which can reduce the indoor temperature. All of our glass products are recycled glass. It is processed from various glass sources, including glass bottles, industrial and construction glass, car windshields, waste glass from glass manufacturers, etc. Some of our products are simply broken and tumbled, while other products are melted and re-processed.