Group items tagged go - Blog & Blogging..!!

Kaizen Continuous Improvement - Ten Tips - Creative Safety - 0 views

blog.creativesafetysupply.com/ontinuous-improvement-ten-tips

kaizen tips safety creative safety

shared by pintadachica on 26 Aug 18 - No Cached

pintadachica on 26 Aug 18

Ten Tips to Help You with Your Kaizen Continuous Improvement Strategy The Kaizen methodology encourages ongoing efforts to ensure continuous improvement throughout a facility. This improvement can come in many forms including waste elimination, improved efficiency, safer work environments and much more. To simply say that a facility is employing Kaizen strategies, is essentially meaningless if you don't have any concrete action items you are following. Whether you're just getting started or you are looking for ways to reinvigorate a Kaizen strategy that is not effective, the following ten tips will be very helpful. Each one can give you ideas on what you can do encourage improvement and allow that improvement to grow and expand long into the future. Tip #1 - Harness the PDCA Strategy One of the key concepts used in Kaizen is the "Plan-Do-Check-Act" strategy. This is a quality model that can be used when implementing any type of improvement in the facility. As you might expect, the PDCA strategy is a cycle of ongoing improvement that should never end. The steps are as follows: Plan - This step is where you identify an area where improvement is possible and make an initial strategy on what chance should be made to realize the desired improvements. Do - Implement the change, but only on a small scale. This may mean having one department make the change in some situations or for larger corporations, having one facility make the update. During this step it is also very important to be gathering as much data regarding the change so it can be properly evaluated. Check - Review the results of the change including the data that was collected. Looking to see if they had the desired impact or not is critical to know whether you should move forward with rolling the change out to other areas. Act - IF the data in the check step points to a success, it is time to push the change out on a wider scale. Once the change has been successfully implemented you wi

<div class="cArrow"> </div><div class="cContentInner">Ten Tips to Help You with Your Kaizen Continuous Improvement Strategy The Kaizen methodology encourages ongoing efforts to ensure continuous improvement throughout a facility. This improvement can come in many forms including waste elimination, improved efficiency, safer work environments and much more. To simply say that a facility is employing Kaizen strategies, is essentially meaningless if you don't have any concrete action items you are following. Whether you're just getting started or you are looking for ways to reinvigorate a Kaizen strategy that is not effective, the following ten tips will be very helpful. Each one can give you ideas on what you can do encourage improvement and allow that improvement to grow and expand long into the future. Tip #1 - Harness the PDCA Strategy One of the key concepts used in Kaizen is the "Plan-Do-Check-Act" strategy. This is a quality model that can be used when implementing any type of improvement in the facility. As you might expect, the PDCA strategy is a cycle of ongoing improvement that should never end. The steps are as follows: Plan - This step is where you identify an area where improvement is possible and make an initial strategy on what chance should be made to realize the desired improvements. Do - Implement the change, but only on a small scale. This may mean having one department make the change in some situations or for larger corporations, having one facility make the update. During this step it is also very important to be gathering as much data regarding the change so it can be properly evaluated. Check - Review the results of the change including the data that was collected. Looking to see if they had the desired impact or not is critical to know whether you should move forward with rolling the change out to other areas. Act - IF the data in the check step points to a success, it is time to push the change out on a wider scale. Once the change has been successfully implemented you wi</div>

...

Cancel

What is a VPN, ExpressVPN Features, Pricing and FAQs - WinErrorFixer - 0 views

winerrorfixer.com/svpn-features-pricing-and-faqs

VPN Apps Network Internet Mobile Computer

shared by rasel136 on 22 Dec 20 - No Cached

rasel136 on 22 Dec 20

VPN, i.e., Virtual Private Network, establishes a secure connection to public and private networks over the Internet. VPN helps to protect your identity and provides a secure network for accessing data. Initially, the VPN connects business networks securely over the Internet. It also allows you to access a business network from home. What is a VPN? How does it work? Why should you use it? These are some common questions that come in the mind of every person who wants to use a VPN. So, let's find out the answer to all these questions. Contents [show] How Does a VPN Work? How Does a VPN Work It is not rocket science to understand how a VPN works. We can simply learn the process of VPN by reading the following steps. Step 1: At first, you need a reliable VPN provider (ExpressVPN Recommended). Then download and install the software. Now select the preferred security settings and set up a safe connection with your desired VPN server. Step 2: After the connection is established; VPN software encrypts your data traffic on your computer and sends it to the VPN server through a secure connection. Step 3: The VPN server decrypts the encrypted data from your computer. Step 4: Your data is being sent on the Internet by the VPN server and receive a reply, which is meant for you. Step 5: This traffic is again encrypted by VPN-server and is sent back to you. Step 6: VPN software will decrypt the data on your device so you can understand and use it. Why ExpressVPN is the Best? The best thing I like about ExpressVPN is that it has a no-logging policy. Apart, from this ExpressVPN is fast, secure, and keeps your IP hidden. ExpressVPN allows you Torrenting/P2P and even works with Tor for the maximum level of privacy. It has a user-friendly interface and a great design that is easy to operate. ExpressVPN uses the government-grade encryption method as default. You can even try doing it manually. ExpressVPN is the best excellent premium VPN service to trust and work.

<div class="cArrow"> </div><div class="cContentInner">VPN, i.e., Virtual Private Network, establishes a secure connection to public and private networks over the Internet. VPN helps to protect your identity and provides a secure network for accessing data. Initially, the VPN connects business networks securely over the Internet. It also allows you to access a business network from home. What is a VPN? How does it work? Why should you use it? These are some common questions that come in the mind of every person who wants to use a VPN. So, let's find out the answer to all these questions. Contents [show] How Does a VPN Work? How Does a VPN Work It is not rocket science to understand how a VPN works. We can simply learn the process of VPN by reading the following steps. Step 1: At first, you need a reliable VPN provider (ExpressVPN Recommended). Then download and install the software. Now select the preferred security settings and set up a safe connection with your desired VPN server. Step 2: After the connection is established; VPN software encrypts your data traffic on your computer and sends it to the VPN server through a secure connection. Step 3: The VPN server decrypts the encrypted data from your computer. Step 4: Your data is being sent on the Internet by the VPN server and receive a reply, which is meant for you. Step 5: This traffic is again encrypted by VPN-server and is sent back to you. Step 6: VPN software will decrypt the data on your device so you can understand and use it. Why ExpressVPN is the Best? The best thing I like about ExpressVPN is that it has a no-logging policy. Apart, from this ExpressVPN is fast, secure, and keeps your IP hidden. ExpressVPN allows you Torrenting/P2P and even works with Tor for the maximum level of privacy. It has a user-friendly interface and a great design that is easy to operate. ExpressVPN uses the government-grade encryption method as default. You can even try doing it manually. ExpressVPN is the best excellent premium VPN service to trust and work.</div>

...

Cancel

Executive Acceptance of LEAN and Operational Excellence - 0 views

blog.creativesafetysupply.com/llence-not-just-a-pretty-rhyme

blog creative safety

shared by pintadachica on 14 Sep 18 - No Cached

pintadachica on 14 Sep 18

Introduction to Operational Excellence For most of us, Lean is a common concept by now. By extension, we're also familiar with the idea of continuous improvement; the way we run our business should ultimately be reflective of a chain of efforts to change for the better and reach more perfect efficiency. That's all well and good, but we've seen more and more businesses shying away from simply relying on "continuous improvement" in recent years and instead throwing around the term "operational excellence." While the two terms do ultimately work in tandem, and even though there's some overlap, it's important to understand where the two differ. A good way to think about operational excellence is as the answer or endgame to your continuous improvement actions, it's a state you want to attain through your workplace improvement endeavors. Unlike continuous improvement, however, where you're simply trying to 'always get better', operational excellence has a more clearly defined point where it can be said you've reached your goals. One of the biggest criteria for operational excellence is a horizontal and vertical (so throughout all levels and teams of a company) understanding of how workflow should look and how to correct problems when something isn't flowing correctly. This creates operational excellence because employees are now able to solve their own problems without relying on specialists or management, drastically decreasing downtime and putting them into a preventative rather than a reactive mode when solving problems. Furthermore, operational excellence then frees up your management and executives to focus on advertising and brand/market expansion planning and projects. In short, operational excellence allows a company to achieve continual improvement while still having the resources to put an emphasis on bottom line and market share growth. Operational Excellence Question Posed Sounds pretty awesome, right?! We think so, but you

<div class="cArrow"> </div><div class="cContentInner">Introduction to Operational Excellence For most of us, Lean is a common concept by now. By extension, we're also familiar with the idea of continuous improvement; the way we run our business should ultimately be reflective of a chain of efforts to change for the better and reach more perfect efficiency. That's all well and good, but we've seen more and more businesses shying away from simply relying on "continuous improvement" in recent years and instead throwing around the term "operational excellence." While the two terms do ultimately work in tandem, and even though there's some overlap, it's important to understand where the two differ. A good way to think about operational excellence is as the answer or endgame to your continuous improvement actions, it's a state you want to attain through your workplace improvement endeavors. Unlike continuous improvement, however, where you're simply trying to 'always get better', operational excellence has a more clearly defined point where it can be said you've reached your goals. One of the biggest criteria for operational excellence is a horizontal and vertical (so throughout all levels and teams of a company) understanding of how workflow should look and how to correct problems when something isn't flowing correctly. This creates operational excellence because employees are now able to solve their own problems without relying on specialists or management, drastically decreasing downtime and putting them into a preventative rather than a reactive mode when solving problems. Furthermore, operational excellence then frees up your management and executives to focus on advertising and brand/market expansion planning and projects. In short, operational excellence allows a company to achieve continual improvement while still having the resources to put an emphasis on bottom line and market share growth. Operational Excellence Question Posed Sounds pretty awesome, right?! We think so, but you</div>

...

Cancel

Safety Myths We Could All Live Without - 0 views

blog.creativesafetysupply.com/yths-we-could-all-live-without

safety myths blog creative

shared by pintadachica on 07 Sep 18 - No Cached

pintadachica on 07 Sep 18

Safety Myths We Could All Live Without Safety MythsI'm going to level with you today: There's a lot, and a mean a metric ton, of misinformation when it comes to safety in the workplace. The more experience you have, the more and more you discover which of the things you've been told actually seem to hold up to the action of a real workplace, and which advice becomes clearly idealistic and less useable. That said, why can't we just skip past the clutter? Why do myths about the nature of safety and accident prevention continue to circulate when experienced practitioners know them to be complete bologna? To be honest, I can't answer that, but hopefully what I can do is more useful; in this article, we're going to go over some common workplace safety myths and dissect them so that, with a whole lot of luck, they won't leave anyone's lips ever again. Accidents Happen Safety Myths AccidentsFirst of all, yes, accidents do happen… but the statement itself is dismissive, and suggests that some things are just out of our control. The problem with this sentiment is twofold. First of all, it's a slippery slope: If you decide one thing is out of your control, it's easier to accept that another thing might be as well. Before you know it, you're leaving too much up to chance and not enough up to your problem solving skills. The second problem is that the idea that accidents just "happen" of their own accord is silly and untrue. There is always something you can do, and you should always be actively improving your safety by finding these things as they come along. One counter example to this that people sometimes come up with is a case in which an employee does something really boneheaded and gets themselves into a dangerous situation. "Isn't that kind of out of my control?" one might ask. Actually, there are two possible situations here: 1. The worker deliberately put themselves in harm's way for some unknown reason. In this case, a resu

<div class="cArrow"> </div><div class="cContentInner">Safety Myths We Could All Live Without Safety MythsI'm going to level with you today: There's a lot, and a mean a metric ton, of misinformation when it comes to safety in the workplace. The more experience you have, the more and more you discover which of the things you've been told actually seem to hold up to the action of a real workplace, and which advice becomes clearly idealistic and less useable. That said, why can't we just skip past the clutter? Why do myths about the nature of safety and accident prevention continue to circulate when experienced practitioners know them to be complete bologna? To be honest, I can't answer that, but hopefully what I can do is more useful; in this article, we're going to go over some common workplace safety myths and dissect them so that, with a whole lot of luck, they won't leave anyone's lips ever again. Accidents Happen Safety Myths AccidentsFirst of all, yes, accidents do happen… but the statement itself is dismissive, and suggests that some things are just out of our control. The problem with this sentiment is twofold. First of all, it's a slippery slope: If you decide one thing is out of your control, it's easier to accept that another thing might be as well. Before you know it, you're leaving too much up to chance and not enough up to your problem solving skills. The second problem is that the idea that accidents just "happen" of their own accord is silly and untrue. There is always something you can do, and you should always be actively improving your safety by finding these things as they come along. One counter example to this that people sometimes come up with is a case in which an employee does something really boneheaded and gets themselves into a dangerous situation. "Isn't that kind of out of my control?" one might ask. Actually, there are two possible situations here: 1. The worker deliberately put themselves in harm's way for some unknown reason. In this case, a resu</div>

...

Cancel

Pandemic & Natural Flu Prevention with Simple Daily Habits - Youngevity Australia Distr... - 0 views

pintadachica on 08 Feb 21

Pandemic & Natural Flu Prevention with Simple Daily Habits The current Coronavirus Pandemic sweeping the world is causing all of us to look at our daily habits. Most of the focus has been on hand sanitation, covering your mouth if you cough or sneeze, and keeping your distance from people who may be at risk of spreading the virus. However, a more prudent action to take would be to look at the daily habits you have in place which could protect you long term from being in the high risk group of most likely to suffer severe consequences from contracting a virus such as COVID-19. Rather than resort to waiting for an immunization to emerge, you could start now to adopt daily habits that support natural pandemic and flu prevention. This high risk group comprises people over the age of 60 who are immune compromised and/or have an underlying health condition that makes them more susceptible to disease and death from that disease. Unfortunately, the health of our population as a whole has been declining for many years now. Have a look at some of the statistics: From 1990 to 2013 there was a 141% increase in deaths from Heart Disease. From 1996 to 2009 there was a 145% increase n people suffering from Asthma From 1999 to 2015 there was a 150% increase in Inflammatory Bowel Disease From 1990 to 2015 there was a 250% increase in Epilepsy From 1999 to 2010 there was a 300% increase in Diabetes From 1996 to 2018 300% more births required fertility treatments. From 1991 to 2015 there were 783% more deaths from Alzheimer's Disease From 1990 to 2018 there was a 4,200% increase in Autism Common diseases are now increasing at epidemic rates, but none of this is hitting the headlines of our mainstream media! What could be causing this massive decline in our population's health, and therefore making us more vulnerable to pandemics like COVID-19 and seasonal flu viruses? Nutrient Deficiency Diseasesmineral-defiency-deseases-and nutrient deficiencyDr Wallach has been saying for man

<div class="cArrow"> </div><div class="cContentInner">Pandemic & Natural Flu Prevention with Simple Daily Habits The current Coronavirus Pandemic sweeping the world is causing all of us to look at our daily habits. Most of the focus has been on hand sanitation, covering your mouth if you cough or sneeze, and keeping your distance from people who may be at risk of spreading the virus. However, a more prudent action to take would be to look at the daily habits you have in place which could protect you long term from being in the high risk group of most likely to suffer severe consequences from contracting a virus such as COVID-19. Rather than resort to waiting for an immunization to emerge, you could start now to adopt daily habits that support natural pandemic and flu prevention. This high risk group comprises people over the age of 60 who are immune compromised and/or have an underlying health condition that makes them more susceptible to disease and death from that disease. Unfortunately, the health of our population as a whole has been declining for many years now. Have a look at some of the statistics: From 1990 to 2013 there was a 141% increase in deaths from Heart Disease. From 1996 to 2009 there was a 145% increase n people suffering from Asthma From 1999 to 2015 there was a 150% increase in Inflammatory Bowel Disease From 1990 to 2015 there was a 250% increase in Epilepsy From 1999 to 2010 there was a 300% increase in Diabetes From 1996 to 2018 300% more births required fertility treatments. From 1991 to 2015 there were 783% more deaths from Alzheimer's Disease From 1990 to 2018 there was a 4,200% increase in Autism Common diseases are now increasing at epidemic rates, but none of this is hitting the headlines of our mainstream media! What could be causing this massive decline in our population's health, and therefore making us more vulnerable to pandemics like COVID-19 and seasonal flu viruses? Nutrient Deficiency Diseasesmineral-defiency-deseases-and nutrient deficiencyDr Wallach has been saying for man</div>

...

Cancel

Bumper Stickers & More: An Introduction to Thermal Printing - Safety Blog and News - In... - 0 views

www.safetyblognews.com/troduction-to-thermal-printing

bumper stickers thermal printing

shared by pintadachica on 28 Jul 18 - No Cached

pintadachica on 28 Jul 18

How to Create Bumper Stickers for Your Sticker campaigns For everything from political campaigns to social causes and beyond, cars adorned with bumper stickers are a regular sight across the country. Regular stickers, even more common, are a staple of our world from a young age, and an easily recognizable object for even children. Have you ever wondered how they're made? Sure, there are many companies that print stickers and the like in bulk for a third party, but there are also countless custom sticker campaigns floating about with highly customized messaging, some of which sprang up nearly instantaneously from their creative parties. These aren't cheap, flimsy creations either, some of them are the backbones of grass roots organizations that have changed the way we think and live our lives. Whatever your idea or needs, you're reading this because you want to create your own stickers, labels, or some other similar creative piece with professionalism and reliability. Let's take a look at exactly how you might get that done. Step One - Get Your Printer Especially if you're going to be producing large quantities of whatever you're making, it will be important that you have a reliable printer that isn't going to break down on you. For this reason, I'd suggest a thermal printer. Thermal printers have relatively few moving parts compared to traditional printers. Thermal Printers 101: The primary way in which thermal printers differ from traditional inkjet type models is that they use heat to transfer or even produce text and images. There are two subtypes: thermal transfer and direct thermal. Thermal transfer printers heat an inked ribbon which is then rolled over a paper or high-graded vinyl, transferring an image. Direct thermal printers work with thermal-chromatic paper, but do not require any ink. A heating element is pressed against the paper in the pattern of the text or imagery desired, and the paper responds by changing color in those places.

<div class="cArrow"> </div><div class="cContentInner">How to Create Bumper Stickers for Your Sticker campaigns For everything from political campaigns to social causes and beyond, cars adorned with bumper stickers are a regular sight across the country. Regular stickers, even more common, are a staple of our world from a young age, and an easily recognizable object for even children. Have you ever wondered how they're made? Sure, there are many companies that print stickers and the like in bulk for a third party, but there are also countless custom sticker campaigns floating about with highly customized messaging, some of which sprang up nearly instantaneously from their creative parties. These aren't cheap, flimsy creations either, some of them are the backbones of grass roots organizations that have changed the way we think and live our lives. Whatever your idea or needs, you're reading this because you want to create your own stickers, labels, or some other similar creative piece with professionalism and reliability. Let's take a look at exactly how you might get that done. Step One - Get Your Printer Especially if you're going to be producing large quantities of whatever you're making, it will be important that you have a reliable printer that isn't going to break down on you. For this reason, I'd suggest a thermal printer. Thermal printers have relatively few moving parts compared to traditional printers. Thermal Printers 101: The primary way in which thermal printers differ from traditional inkjet type models is that they use heat to transfer or even produce text and images. There are two subtypes: thermal transfer and direct thermal. Thermal transfer printers heat an inked ribbon which is then rolled over a paper or high-graded vinyl, transferring an image. Direct thermal printers work with thermal-chromatic paper, but do not require any ink. A heating element is pressed against the paper in the pattern of the text or imagery desired, and the paper responds by changing color in those places. </div>

...

Cancel

Awkward Postures - Five Postures to be avoided in the Workplace - 0 views

blog.creativesafetysupply.com/to-be-avoided-in-the-workplace

postures workplace safety blogm creative

shared by pintadachica on 20 Jul 18 - No Cached

pintadachica on 20 Jul 18

Eliminating Awkward Postures For most companies, the work that employees perform on a daily basis can be quite physical. This type of physical labor can lead to a wide range of injuries. Of course, to improve on workplace safety it is important to do all you can to help reduce the amount and severity of these types of injuries. One easy place where you can start is with the different postures that employees take while performing their day to day activities. In many cases, they put themselves in awkward postures, which increase the risk of injuries to the back, neck and other parts of the body. Fortunately, there are typically alternative ways to do things or even tools that can do those tasks for them so they can avoid injury. According to OSHA: Working in awkward postures increases the exertion and muscle force an employee must apply to complete a task and compresses tendons, nerves and blood vessels. In general, the more extreme the postures the more force is needed to complete the task. Examples of awkward postures include performing overhead work, bending or twisting to lift an object, typing with bent wrists, and squatting. The important thing is helping to identify the awkward postures, and help find alternatives for the employees. The following five positions should be removed from the workplace as much as possible so that employees can complete their work with as little risk for injury as possible. 5 Awkward Postures that Should be Avoided 1. Working with Arms above the Head The first awkward posture that is commonly seen in workplaces is trying to complete tasks with your arms above the head. There are many examples of this, some of which could include holding up a board while it is secured in place, or even painting a ceiling. Any time you are working with your arms over your head, you are putting added strain on your back. In addition, your arms are going to fatigue much more quickly than they would in a more natural position. This can put you at r

<div class="cArrow"> </div><div class="cContentInner">Eliminating Awkward Postures For most companies, the work that employees perform on a daily basis can be quite physical. This type of physical labor can lead to a wide range of injuries. Of course, to improve on workplace safety it is important to do all you can to help reduce the amount and severity of these types of injuries. One easy place where you can start is with the different postures that employees take while performing their day to day activities. In many cases, they put themselves in awkward postures, which increase the risk of injuries to the back, neck and other parts of the body. Fortunately, there are typically alternative ways to do things or even tools that can do those tasks for them so they can avoid injury. According to OSHA: Working in awkward postures increases the exertion and muscle force an employee must apply to complete a task and compresses tendons, nerves and blood vessels. In general, the more extreme the postures the more force is needed to complete the task. Examples of awkward postures include performing overhead work, bending or twisting to lift an object, typing with bent wrists, and squatting. The important thing is helping to identify the awkward postures, and help find alternatives for the employees. The following five positions should be removed from the workplace as much as possible so that employees can complete their work with as little risk for injury as possible. 5 Awkward Postures that Should be Avoided 1. Working with Arms above the Head The first awkward posture that is commonly seen in workplaces is trying to complete tasks with your arms above the head. There are many examples of this, some of which could include holding up a board while it is secured in place, or even painting a ceiling. Any time you are working with your arms over your head, you are putting added strain on your back. In addition, your arms are going to fatigue much more quickly than they would in a more natural position. This can put you at r</div>

...

Cancel

The JIT System - Creative Safety - 0 views

blog.creativesafetysupply.com/jit-system

creative safety blog jit system

shared by pintadachica on 21 Aug 18 - No Cached

pintadachica on 21 Aug 18

When running any sort of physical production based business, you will often have stock on hand. Instead of only stocking for a short time, there will be a "backup" supply of products that can be called upon as demand changes. This is known as "just in case" manufacturing and is highly common in most industries. However, several decades ago, the rise of lean business gave way to the concept of "just in time" manufacturing. In a just in time, or JIT, system, products are made as they are demanded and there is little to (ideally) no back-stock at any time. Why go lean? The idea behind JIT manufacturing is that one can eliminate several kinds of waste by taking away the need to keep inventory of excess stock. From now on, equate "stock" to "excess stock" or the concept of having too much on hand, because in a JIT environment "stock" doesn't really exist outside of individual orders. When you don't have to keep inventory, employees free up their time for other projects and tasks. Also, you have less paperwork to manage, and can focus on other things, like workplace safety, new profitability angles and marketing strategies, etc. Another reason to go to a JIT model is that you increase accountability of management. Because you have no inventory to fall back on in a JIT situation, inventory cannot be used as a crutch to make up for other problems. Slow, inefficient production is often masked by a stockpile of inventory, making it harder to realize certain areas of production may need improvement - these may include machine functionality, worker habits, reliability, and inadequate space management. Another huge place you save by adopting this method is in transportation. Materials do not need to be stocked at various sites and you need to do much less transporting. You will eliminate time wasted in transit when there is traffic or road congestion, and you'll even be more environmentally friendly by reducing fuel burned for shipping purposes

<div class="cArrow"> </div><div class="cContentInner">When running any sort of physical production based business, you will often have stock on hand. Instead of only stocking for a short time, there will be a "backup" supply of products that can be called upon as demand changes. This is known as "just in case" manufacturing and is highly common in most industries. However, several decades ago, the rise of lean business gave way to the concept of "just in time" manufacturing. In a just in time, or JIT, system, products are made as they are demanded and there is little to (ideally) no back-stock at any time. Why go lean? The idea behind JIT manufacturing is that one can eliminate several kinds of waste by taking away the need to keep inventory of excess stock. From now on, equate "stock" to "excess stock" or the concept of having too much on hand, because in a JIT environment "stock" doesn't really exist outside of individual orders. When you don't have to keep inventory, employees free up their time for other projects and tasks. Also, you have less paperwork to manage, and can focus on other things, like workplace safety, new profitability angles and marketing strategies, etc. Another reason to go to a JIT model is that you increase accountability of management. Because you have no inventory to fall back on in a JIT situation, inventory cannot be used as a crutch to make up for other problems. Slow, inefficient production is often masked by a stockpile of inventory, making it harder to realize certain areas of production may need improvement - these may include machine functionality, worker habits, reliability, and inadequate space management. Another huge place you save by adopting this method is in transportation. Materials do not need to be stocked at various sites and you need to do much less transporting. You will eliminate time wasted in transit when there is traffic or road congestion, and you'll even be more environmentally friendly by reducing fuel burned for shipping purposes</div>

...

Cancel

Slips, Trips, & Falls - Creative Safety - 0 views

blog.creativesafetysupply.com/slips-trips-falls

creative safety falls blog

shared by pintadachica on 24 Aug 18 - No Cached

pintadachica on 24 Aug 18

It happens to all of us in every day life, from time to time uneven ground, slippery surfaces, or a momentary distraction can send us tumbling. In most cases, we're lucky to walk away relatively unscathed, but slips, trips, and falls can also cause major injuries and complications. This is especially true in the workplace, where heavy equipment, moving vehicles, and other factors can be involved. Let's take a look at some effective methods you can improve your efforts to prevent these common injuries. Why You Should Care While slips and falls can be serious, we witness minor tumbles more often, desensitizing us to the potential for injury, death, and work loss days as a result. To counter this perception, however, the U.S. Department of Labor put out some startling statistics: According to reports filed, slips, trips, and falls are second only to motor vehicle incidents in accidental deaths every single year. Furthermore, one quarter of all injury claims filed in a year will come from slips and falls, and the estimated work days lost per year to related injuries number nearly 100 million in the U.S. alone - accounting for over 60% of all work days lost. Clearly, there are improvements to be made, and a large cumulative consequence when they are not. Decreasing Trip, Slip, and Fall Frequency caution-wet-floor-signMinimize slippery areas: Depending on the type of business you're in, the areas that become greasy or slippery in your workplace, and the root causes behind them, are going to be different. In a restaurant kitchen or food-related establishment, kitchen floors may become slippery with water or greasy from food scraps. In a production facility, a material spill might leave a floor dangerously slick. In a supply yard, sawdust, dust, or machine grease and grime might account for your most dangerous slipping hazards. While slippery areas are sometimes unavoidable, the length of time areas are slippery can be controlled and minimized. Make it employee pr

<div class="cArrow"> </div><div class="cContentInner">It happens to all of us in every day life, from time to time uneven ground, slippery surfaces, or a momentary distraction can send us tumbling. In most cases, we're lucky to walk away relatively unscathed, but slips, trips, and falls can also cause major injuries and complications. This is especially true in the workplace, where heavy equipment, moving vehicles, and other factors can be involved. Let's take a look at some effective methods you can improve your efforts to prevent these common injuries. Why You Should Care While slips and falls can be serious, we witness minor tumbles more often, desensitizing us to the potential for injury, death, and work loss days as a result. To counter this perception, however, the U.S. Department of Labor put out some startling statistics: According to reports filed, slips, trips, and falls are second only to motor vehicle incidents in accidental deaths every single year. Furthermore, one quarter of all injury claims filed in a year will come from slips and falls, and the estimated work days lost per year to related injuries number nearly 100 million in the U.S. alone - accounting for over 60% of all work days lost. Clearly, there are improvements to be made, and a large cumulative consequence when they are not. Decreasing Trip, Slip, and Fall Frequency caution-wet-floor-signMinimize slippery areas: Depending on the type of business you're in, the areas that become greasy or slippery in your workplace, and the root causes behind them, are going to be different. In a restaurant kitchen or food-related establishment, kitchen floors may become slippery with water or greasy from food scraps. In a production facility, a material spill might leave a floor dangerously slick. In a supply yard, sawdust, dust, or machine grease and grime might account for your most dangerous slipping hazards. While slippery areas are sometimes unavoidable, the length of time areas are slippery can be controlled and minimized. Make it employee pr</div>

...

Cancel

10 Construction Safety Facts the May Surprise You - 0 views

blog.creativesafetysupply.com/ety-facts-the-may-surprise-you

safety creative blog

shared by pintadachica on 18 Jul 18 - No Cached

pintadachica on 18 Jul 18

Make Construction Safety a Priority Everyone knows that construction sites can be very dangerous. The more you know about the types of danger you will face, however, will help you to take steps toward keeping everyone safe. Look over the following 10 safety facts and see what you can learn about how to improve the overall safety of your facility. In addition to using this information to help you to make safety improvements, you can also show these items to the workers at any site so they can be more aware. Some of these facts may surprise people, and cause them to be more aware of their surroundings. According to OSHA, "Nearly 6.5 million people work at approximately 252,000 construction sites across the nation on any given day. The fatal injury rate for the construction industry is higher than the national average in this category for all industries." 10 Tips to Improve Construction Safety Fact #1 - Losing your Load On construction sites people use machines to lift and move all sorts of things on a regular basis. Whether it is lifting wood or metal beams, or you are digging out dirt to prepare to lay a foundation, this is an essential part of most jobs. The vast majority of times this type of activity goes very smoothly and the jobs are completed without incident. The fact is, however, that having loads come loose while in transit is actually a leading cause of injury on construction sites. You need to keep in mind that even if you don't lose the entire load, people can be severely injured from even one thing falling out of a crane or back hoe. With this in mind, people working on site need to know to stay well away from this machinery, and the machine operators need to know to avoid moving items when people are nearby. Fact #2 - Entering and Leaving Heavy Machinery Another safety issue related to working with heavy machinery is related to operators getting on and off of the rigs that they will be working on. While this is something that they of

<div class="cArrow"> </div><div class="cContentInner">Make Construction Safety a Priority Everyone knows that construction sites can be very dangerous. The more you know about the types of danger you will face, however, will help you to take steps toward keeping everyone safe. Look over the following 10 safety facts and see what you can learn about how to improve the overall safety of your facility. In addition to using this information to help you to make safety improvements, you can also show these items to the workers at any site so they can be more aware. Some of these facts may surprise people, and cause them to be more aware of their surroundings. According to OSHA, "Nearly 6.5 million people work at approximately 252,000 construction sites across the nation on any given day. The fatal injury rate for the construction industry is higher than the national average in this category for all industries." 10 Tips to Improve Construction Safety Fact #1 - Losing your Load On construction sites people use machines to lift and move all sorts of things on a regular basis. Whether it is lifting wood or metal beams, or you are digging out dirt to prepare to lay a foundation, this is an essential part of most jobs. The vast majority of times this type of activity goes very smoothly and the jobs are completed without incident. The fact is, however, that having loads come loose while in transit is actually a leading cause of injury on construction sites. You need to keep in mind that even if you don't lose the entire load, people can be severely injured from even one thing falling out of a crane or back hoe. With this in mind, people working on site need to know to stay well away from this machinery, and the machine operators need to know to avoid moving items when people are nearby. Fact #2 - Entering and Leaving Heavy Machinery Another safety issue related to working with heavy machinery is related to operators getting on and off of the rigs that they will be working on. While this is something that they of</div>

...

Cancel

10 Reasons Why Industrial Labeling is Important - 0 views

blog.creativesafetysupply.com/dustrial-labeling-is-important

labeling important creative safety blog

shared by pintadachica on 28 Jun 18 - No Cached

pintadachica on 28 Jun 18

Improve Organization and Efficiency with Industrial Labeling Industrial labeling is an essential activity in any facility, and for many different reasons. For example, it can help to improve safety as well as organization and even efficiency. In fact, proper labeling can benefit almost every measurable area of the facility. If you don't already have a proactive labeling policy within your facility, look at the following ten points to see why it is so important. 1. Regulatory Compliance One of the most important reasons why you need to focus on proper industrial labeling is that it is often required by organizations like OSHA. If you are using certain hazardous chemicals, for example, you will need to have the containers labeled using the proper industry standards. In addition, you must put these types of labels on any products that contain these chemicals before you ship them out. There may be other regulations where you need to have proper labeling too. Machines and pipes that use or transport hazardous items will often need to be properly labeled. Even if it is just steam that is being transported, you should likely have it clearly noted so nobody accidently burns themselves while working in the area. 2. Tracking Maintenance Tasks Many facilities will use industrial labeling to distinguish different machines or vehicles within the facility. This is much easier to use than checking the VIN or serial number each time, and it can make scheduling the maintenance of these items much easier. If you have an industrial label maker, you can print off a label that has a bar code or other easily identify mark. This can then be scanned by the maintenance team every time they change the oil or perform any other type of work. This can help them to log all the activities they have done, and even make it so all their activities are tracked through computer programs. However you decide to actually track and store the information, you will find that having each machine ta

<div class="cArrow"> </div><div class="cContentInner">Improve Organization and Efficiency with Industrial Labeling Industrial labeling is an essential activity in any facility, and for many different reasons. For example, it can help to improve safety as well as organization and even efficiency. In fact, proper labeling can benefit almost every measurable area of the facility. If you don't already have a proactive labeling policy within your facility, look at the following ten points to see why it is so important. 1. Regulatory Compliance One of the most important reasons why you need to focus on proper industrial labeling is that it is often required by organizations like OSHA. If you are using certain hazardous chemicals, for example, you will need to have the containers labeled using the proper industry standards. In addition, you must put these types of labels on any products that contain these chemicals before you ship them out. There may be other regulations where you need to have proper labeling too. Machines and pipes that use or transport hazardous items will often need to be properly labeled. Even if it is just steam that is being transported, you should likely have it clearly noted so nobody accidently burns themselves while working in the area. 2. Tracking Maintenance Tasks Many facilities will use industrial labeling to distinguish different machines or vehicles within the facility. This is much easier to use than checking the VIN or serial number each time, and it can make scheduling the maintenance of these items much easier. If you have an industrial label maker, you can print off a label that has a bar code or other easily identify mark. This can then be scanned by the maintenance team every time they change the oil or perform any other type of work. This can help them to log all the activities they have done, and even make it so all their activities are tracked through computer programs. However you decide to actually track and store the information, you will find that having each machine ta</div>

...

Cancel

Skateboarding, The AI Company and the Autolearn Boost - The AI Company - 0 views

www.autolearn.ai/...en-skateboarding-autolearns-ai

artificial intelligence innovation technology digital strategy AI company

shared by pintadachica on 09 Jan 19 - No Cached

What is common between skateboarding and learning to skateboarding & autolearn.ai’s AI platform. Lots, turns out. Consider the process of learning to skateboard. One repeatedly tries a move with the skateboard. You look at if you can land the move. If you do, you try a different move. if you don’t, you slightly vary something in your technique; maybe you try a different center of gravity or angle your legs slightly differently or move your arms differently. Rinse. Repeat. As the skateboarder tries different variations, the “learn” the intricacies of every move and slowly improve. The more time, the more variations and the more analysis they do, the faster they learn and get better. Over time, one can go from a novice to an expert, having built a massive repository of insights and training that help the brain leverage the learning to control the brain that in turn controls the muscles, bones and body weight to effortlessly skateboard. The AI Company’s platform is designed to mimic the process of learning to skateboard. However, instead of sequentially repeating the learning task, the AI platform enables automatically parallelizes the learning process by simultaneously trying out each possible variation for each move and then parallelizing learning multiple moves at the same time. This massive parallelization is accentuated by the automatic selection of the most optimal and accurate insights (AI models) that learn the best in the context of the problem at hand. The best AI models are automatically deployed to production, stored in a very secure form and can be leveraged in traditional app development or in the development of intelligent smart contracts (AutoLearn’s SmartChain). Imagine learning a skill instantly by parallelizing your learning so that you can try out the millions of variations, learn from them and ingest the learnings instantly. This is the AutoLearn boost.  With The AI Company’s AI, you are able to reduce what traditionally in data science would take upwards of a year and multiple data scientists to mere days through the automated training, selection and deployment of the best AI models out of 1000s of variations generated in parallel by AutoLearn. Not only do you reduce the time taken to go live with AI, because of the automation and the efficiency maximizer in AutoLearn’s AutoAI, you are guaranteed the best possible AI model. This is not guaranteed in a manually driven data science practice!
...

Cancel

pintadachica on 09 Jan 19

What is common between skateboarding and learning to skateboarding & autolearn.ai's AI platform. Lots, turns out. Consider the process of learning to skateboard. One repeatedly tries a move with the skateboard. You look at if you can land the move. If you do, you try a different move. if you don't, you slightly vary something in your technique; maybe you try a different center of gravity or angle your legs slightly differently or move your arms differently. Rinse. Repeat. As the skateboarder tries different variations, the "learn" the intricacies of every move and slowly improve. The more time, the more variations and the more analysis they do, the faster they learn and get better. Over time, one can go from a novice to an expert, having built a massive repository of insights and training that help the brain leverage the learning to control the brain that in turn controls the muscles, bones and body weight to effortlessly skateboard. The AI Company's platform is designed to mimic the process of learning to skateboard. However, instead of sequentially repeating the learning task, the AI platform enables automatically parallelizes the learning process by simultaneously trying out each possible variation for each move and then parallelizing learning multiple moves at the same time. This massive parallelization is accentuated by the automatic selection of the most optimal and accurate insights (AI models) that learn the best in the context of the problem at hand. The best AI models are automatically deployed to production, stored in a very secure form and can be leveraged in traditional app development or in the development of intelligent smart contracts (AutoLearn's SmartChain). Imagine learning a skill instantly by parallelizing your learning so that you can try out the millions of variations, learn from them and ingest the learnings instantly. This is the AutoLearn boost. With The AI Company's AI, you are able to reduce what traditionally in data

<div class="cArrow"> </div><div class="cContentInner">What is common between skateboarding and learning to skateboarding & autolearn.ai's AI platform. Lots, turns out. Consider the process of learning to skateboard. One repeatedly tries a move with the skateboard. You look at if you can land the move. If you do, you try a different move. if you don't, you slightly vary something in your technique; maybe you try a different center of gravity or angle your legs slightly differently or move your arms differently. Rinse. Repeat. As the skateboarder tries different variations, the "learn" the intricacies of every move and slowly improve. The more time, the more variations and the more analysis they do, the faster they learn and get better. Over time, one can go from a novice to an expert, having built a massive repository of insights and training that help the brain leverage the learning to control the brain that in turn controls the muscles, bones and body weight to effortlessly skateboard. The AI Company's platform is designed to mimic the process of learning to skateboard. However, instead of sequentially repeating the learning task, the AI platform enables automatically parallelizes the learning process by simultaneously trying out each possible variation for each move and then parallelizing learning multiple moves at the same time. This massive parallelization is accentuated by the automatic selection of the most optimal and accurate insights (AI models) that learn the best in the context of the problem at hand. The best AI models are automatically deployed to production, stored in a very secure form and can be leveraged in traditional app development or in the development of intelligent smart contracts (AutoLearn's SmartChain). Imagine learning a skill instantly by parallelizing your learning so that you can try out the millions of variations, learn from them and ingest the learnings instantly. This is the AutoLearn boost. With The AI Company's AI, you are able to reduce what traditionally in data</div>

...

Cancel

What is Lean Management? - 0 views

blog.creativesafetysupply.com/what-is-lean-management

lean management creative safety supply

shared by pintadachica on 30 May 18 - No Cached

pintadachica on 30 May 18

Lean Management - A Guide To Starting Out Right Much like anything over-used and spread before those singing praises have done a lot of research, Lean is a concept that sometimes, despite the best of intentions, misses its mark. Lean principles aren't particularly tricky, but with many offshoots and brands of the ideology, it can be easy for new Lean managers to get caught up in misinformation. At its core, lean is about eliminating all kinds of waste from your business. It sounds simple enough, but one of the biggest problems for many newbies is changing your concept of just what "waste" is. Once you've got a grasp on that, you need to move onto individual strategies that can help you eliminate that waste. In this article, we're going to go over how to accomplish both of these tasks as a manager who may be new to Lean by exploring unique facets of this management type and how they interact with elements of your business. One of the largest differences between Lean management and traditional styles of management is that in a traditional methodology your primary (and nearly sole) concern is the end of the line result. While Lean is of course concerned with achieving superior end results, its focus is on the processes that get you there. In this sense, what you learn and practice as a Lean manager is more about making individual pieces work together efficiently than having a tunnel-vision focus on numbers and figures at the end of the cycle. The Relationship Between Lean management, Waste Elimination, and Continual Improvement "If someone tells you that "lean management is this" and not something else, if someone puts it in a box and ties a bow around it and presents it in a neat package with four walls around it, then that someone knows not of what they speak. Why? Because it is in motion and not a framed picture hanging on the wall. It is a melody, a rhythm, and not a single note." - Lawrence M. Miller, Management Meditations While perhap

<div class="cArrow"> </div><div class="cContentInner">Lean Management - A Guide To Starting Out Right Much like anything over-used and spread before those singing praises have done a lot of research, Lean is a concept that sometimes, despite the best of intentions, misses its mark. Lean principles aren't particularly tricky, but with many offshoots and brands of the ideology, it can be easy for new Lean managers to get caught up in misinformation. At its core, lean is about eliminating all kinds of waste from your business. It sounds simple enough, but one of the biggest problems for many newbies is changing your concept of just what "waste" is. Once you've got a grasp on that, you need to move onto individual strategies that can help you eliminate that waste. In this article, we're going to go over how to accomplish both of these tasks as a manager who may be new to Lean by exploring unique facets of this management type and how they interact with elements of your business. One of the largest differences between Lean management and traditional styles of management is that in a traditional methodology your primary (and nearly sole) concern is the end of the line result. While Lean is of course concerned with achieving superior end results, its focus is on the processes that get you there. In this sense, what you learn and practice as a Lean manager is more about making individual pieces work together efficiently than having a tunnel-vision focus on numbers and figures at the end of the cycle. The Relationship Between Lean management, Waste Elimination, and Continual Improvement "If someone tells you that "lean management is this" and not something else, if someone puts it in a box and ties a bow around it and presents it in a neat package with four walls around it, then that someone knows not of what they speak. Why? Because it is in motion and not a framed picture hanging on the wall. It is a melody, a rhythm, and not a single note." - Lawrence M. Miller, Management Meditations While perhap</div>

...

Cancel

Lean In Non-Profits - 0 views

blog.creativesafetysupply.com/lean-in-non-profits

lean creative safety blog

shared by pintadachica on 02 Jun 18 - No Cached

pintadachica on 02 Jun 18

Lean Six Sigma for Non Profits We always like to hear about people applying business methodologies and mechanics in arguably unorthodox ways or markets, and today I stumbled across a LinkedIn discussion that happens to exemplify exactly that sentiment. User William Falquero seemed to be onto something interesting as he posed a question for other professionals: Could non-profit organizations benefit from Lean Six Sigma thinking? If so, how would they be implemented, what would the challenges of this sort of endeavor be? Only a few users jumped in right off the bat, but, lucky for our purposes today, they were some critical thinkers with some useful insight and examples to offer up. Today, we're going to take an in-depth look at the use of Lean and Six Sigma thinking and tools within non-profit and charity organizations. Are Charities Good Candidates for Lean? One of the first and most important things to establish when considering implementation of Lean in any company or organization is to figure out how they could benefit from the systems. In the case of charities, one user points out that room for improvement from Lean is readily apparent simply in the mindsets of the people who work at them: "The sweat and tears the non-profit workers and volunteers shed and the effort they put forward is focused on those they serve, with less thought on HOW they are served" This is what Richard Petty had to say of an organization he actually had the experience of implementing Six Sigma with. One thing he goes on to highlight and elaborate on is the fact that many volunteers and non-profit workers are so focused on those they want to help that they may get blinded as to the mechanisms that can take them there (and these are the places opportunities for improvement present themselves). Even in other more traditional workplaces, we see this sort of "tunnel vision" as fairly common: It can be hard to get workers to take a step back from the endgame results they're

<div class="cArrow"> </div><div class="cContentInner">Lean Six Sigma for Non Profits We always like to hear about people applying business methodologies and mechanics in arguably unorthodox ways or markets, and today I stumbled across a LinkedIn discussion that happens to exemplify exactly that sentiment. User William Falquero seemed to be onto something interesting as he posed a question for other professionals: Could non-profit organizations benefit from Lean Six Sigma thinking? If so, how would they be implemented, what would the challenges of this sort of endeavor be? Only a few users jumped in right off the bat, but, lucky for our purposes today, they were some critical thinkers with some useful insight and examples to offer up. Today, we're going to take an in-depth look at the use of Lean and Six Sigma thinking and tools within non-profit and charity organizations. Are Charities Good Candidates for Lean? One of the first and most important things to establish when considering implementation of Lean in any company or organization is to figure out how they could benefit from the systems. In the case of charities, one user points out that room for improvement from Lean is readily apparent simply in the mindsets of the people who work at them: "The sweat and tears the non-profit workers and volunteers shed and the effort they put forward is focused on those they serve, with less thought on HOW they are served" This is what Richard Petty had to say of an organization he actually had the experience of implementing Six Sigma with. One thing he goes on to highlight and elaborate on is the fact that many volunteers and non-profit workers are so focused on those they want to help that they may get blinded as to the mechanisms that can take them there (and these are the places opportunities for improvement present themselves). Even in other more traditional workplaces, we see this sort of "tunnel vision" as fairly common: It can be hard to get workers to take a step back from the endgame results they're</div>

...

Cancel

Safety Lean Manufacturing - 5 Ways to Combine Safety and Lean - Lean Challenge - 0 views

www.iecieeechallenge.org/ays-to-combine-safety-and-lean

safety lean manufacturing combine

shared by pintadachica on 24 May 18 - No Cached

pintadachica on 24 May 18

Improving and Implementing Safety Lean Manufacturing Safety Lean ManufacturingWhen people look at facility improvement opportunities they often look at process improvement methodologies, such as Lean Manufacturing. Another thing that is commonly reviewed is facility safety improvements. In many cases, however, they don't see that using lean manufacturing techniques can often also provide safety improvements. Thinking about safety lean manufacturing will allow you to make improvements throughout your facility in a way that will not only reduce waste and increase profitability, but also help improve safety at the same time. The following are five examples of how lean can directly improve safety within your facility. According to DesignSafe's document on, Integrating Safety and Lean Manufacturing Safety must not be viewed as a separate activity that is a non value-added effort with objectives contrary to lean concepts. Elimination of waste can also be interpreted as the elimination or minimization of risk that adversely affects wasted human resources and lost time from injuries. Lean imperatives of faster, better, and cheaper must encompass the issue of running safer as well. Safety Lean Manufacturing - Top 5 ways to Combine Them 1. Eliminate Overproduction to Reduce Unnecessary Interaction with Machines Safety Lean Manufacturing OverproductionOne important focus for lean manufacturing is the elimination of over production. While this is mainly done to help eliminate waste, it will also make for a safer facility because people won't be working on the machines as much. Any interaction with the machine is an opportunity for an accident, so this is a good move for safety too. Look also at the fact that when people are spending more hours working at a machine, they are likely to be more fatigued, which increases the risk for accidents and injuries. 2. Listening to Employees Improvement Ideas One of the trademarks of a good lean manufacturing program is t

<div class="cArrow"> </div><div class="cContentInner">Improving and Implementing Safety Lean Manufacturing Safety Lean ManufacturingWhen people look at facility improvement opportunities they often look at process improvement methodologies, such as Lean Manufacturing. Another thing that is commonly reviewed is facility safety improvements. In many cases, however, they don't see that using lean manufacturing techniques can often also provide safety improvements. Thinking about safety lean manufacturing will allow you to make improvements throughout your facility in a way that will not only reduce waste and increase profitability, but also help improve safety at the same time. The following are five examples of how lean can directly improve safety within your facility. According to DesignSafe's document on, Integrating Safety and Lean Manufacturing Safety must not be viewed as a separate activity that is a non value-added effort with objectives contrary to lean concepts. Elimination of waste can also be interpreted as the elimination or minimization of risk that adversely affects wasted human resources and lost time from injuries. Lean imperatives of faster, better, and cheaper must encompass the issue of running safer as well. Safety Lean Manufacturing - Top 5 ways to Combine Them 1. Eliminate Overproduction to Reduce Unnecessary Interaction with Machines Safety Lean Manufacturing OverproductionOne important focus for lean manufacturing is the elimination of over production. While this is mainly done to help eliminate waste, it will also make for a safer facility because people won't be working on the machines as much. Any interaction with the machine is an opportunity for an accident, so this is a good move for safety too. Look also at the fact that when people are spending more hours working at a machine, they are likely to be more fatigued, which increases the risk for accidents and injuries. 2. Listening to Employees Improvement Ideas One of the trademarks of a good lean manufacturing program is t</div>

...

Cancel

Innovation is not Technology and Technology is not Innovation - The AI Company - 0 views

www.autolearn.ai/...2017-7-4-innovation-technology

technology innovation AI autolearn digital strategy company Business

shared by pintadachica on 20 Dec 18 - No Cached

pintadachica on 20 Dec 18

One of the most common misconceptions out there is the belief that technology equates innovation. Innovation is the creation of new value through a better solution for a problem that either does a better job in solving the problem or does so in a manner that the solution is accessible in a larger set of circumstances by a larger number of people. On the other hand, technology is simply the tooling that holds the promise of new solutions but by itself, is meaningless. Enterprises can become enamored by the promise and hype about technology and go down long, complex journeys, invest millions in upgrading technology and still come out empty on the other side because they built technology for technology's sake. Even in well intention boards and C-suite, industry peer pressure and hype around technologies can force action that ultimately leads to massive investments in people, software, technology, and vendors but does not yield the ROI promised by the technology. Leadership The problem can be accentuated when not enough due diligence is done on the applicability of the technology to the enterprise given the current state i.e. the point in time when the technology is being introduced, the customer's propensity to accept the technology-driven solution i.e. are the users ready to embrace, adopt, learn and utilize new solutions and burning problems that necessitate the adoption of new technology to better solve the problem. When the timing of new technology introduction is gotten wrong, it almost always fails to deliver on its promised ROI. Leaders need to rise above the hype and peer pressure and ensure that they understand, first and foremost, the burning problems that plague their customers or make the bedrock of their future strategy. Next, leaders need to ensure and validate that the technology in mind can actually be used to solve the problem through rapid prototyping and minimal investment. Once customer feedback on the prototype has been validated, then only

<div class="cArrow"> </div><div class="cContentInner">One of the most common misconceptions out there is the belief that technology equates innovation. Innovation is the creation of new value through a better solution for a problem that either does a better job in solving the problem or does so in a manner that the solution is accessible in a larger set of circumstances by a larger number of people. On the other hand, technology is simply the tooling that holds the promise of new solutions but by itself, is meaningless. Enterprises can become enamored by the promise and hype about technology and go down long, complex journeys, invest millions in upgrading technology and still come out empty on the other side because they built technology for technology's sake. Even in well intention boards and C-suite, industry peer pressure and hype around technologies can force action that ultimately leads to massive investments in people, software, technology, and vendors but does not yield the ROI promised by the technology. Leadership The problem can be accentuated when not enough due diligence is done on the applicability of the technology to the enterprise given the current state i.e. the point in time when the technology is being introduced, the customer's propensity to accept the technology-driven solution i.e. are the users ready to embrace, adopt, learn and utilize new solutions and burning problems that necessitate the adoption of new technology to better solve the problem. When the timing of new technology introduction is gotten wrong, it almost always fails to deliver on its promised ROI. Leaders need to rise above the hype and peer pressure and ensure that they understand, first and foremost, the burning problems that plague their customers or make the bedrock of their future strategy. Next, leaders need to ensure and validate that the technology in mind can actually be used to solve the problem through rapid prototyping and minimal investment. Once customer feedback on the prototype has been validated, then only</div>

...

Cancel

Is A Private Blockchain the way to go? - The AI Company - 0 views

www.autolearn.ai/...ivate-blockchain-the-way-to-go

autolearn artificial intelligence innovation technology AI company software blockhain design

shared by pintadachica on 13 Dec 18 - No Cached

pintadachica on 13 Dec 18

Blockchain are certain to disrupt almost all industries fundamentally. Though there are technical issues, the idea of utilizing a blockchain to prove ownership, to prevent double spending and to establish trust and transactions in an otherwise trust-deficient world, is gaining excitement and acceptance. More and more enterprises are getting curious about the blockchain and are willing to start investing in learning, prototyping, and building on top of the blockchain technology. Starting out with the blockchain requires investment in a building the domain expertise, establishing the identity, establishing the infrastructure and deciding the blockchain that the enterprise wants to work with. Among these decisions is the question: Should the enterprise choose a public blockchain or a private blockchain. Both have advantages and disadvantages and the question can often come down to what are the short term goals and potential applications that the enterprise wants to build on the blockchain. Public BlockChains The default option when considering blockchains is the public blockchain. This is the blockchain that is truly decentralized, leverageable for any type of transaction and in the case of the Ethereum blockchain, offers SmartContract authoring capability that makes the blockchain very attractive for building contracts that reflect the needs of the real world. However, for an enterprise deciding between public or private contracts, there are some considerations that require attention. Speed and Scalability Public blockchains tend to be slower as they are limited by the number of transactions that can be verified every second and confirmed every 10 minutes. There are several efforts underway to make blockchains faster and more scalable however those will take time to get implemented. Speed and scalability will continue to be an issue and contracts and applications that require instant or near real time execution will suffer from this lack of speed and scale. Se

<div class="cArrow"> </div><div class="cContentInner">Blockchain are certain to disrupt almost all industries fundamentally. Though there are technical issues, the idea of utilizing a blockchain to prove ownership, to prevent double spending and to establish trust and transactions in an otherwise trust-deficient world, is gaining excitement and acceptance. More and more enterprises are getting curious about the blockchain and are willing to start investing in learning, prototyping, and building on top of the blockchain technology. Starting out with the blockchain requires investment in a building the domain expertise, establishing the identity, establishing the infrastructure and deciding the blockchain that the enterprise wants to work with. Among these decisions is the question: Should the enterprise choose a public blockchain or a private blockchain. Both have advantages and disadvantages and the question can often come down to what are the short term goals and potential applications that the enterprise wants to build on the blockchain. Public BlockChains The default option when considering blockchains is the public blockchain. This is the blockchain that is truly decentralized, leverageable for any type of transaction and in the case of the Ethereum blockchain, offers SmartContract authoring capability that makes the blockchain very attractive for building contracts that reflect the needs of the real world. However, for an enterprise deciding between public or private contracts, there are some considerations that require attention. Speed and Scalability Public blockchains tend to be slower as they are limited by the number of transactions that can be verified every second and confirmed every 10 minutes. There are several efforts underway to make blockchains faster and more scalable however those will take time to get implemented. Speed and scalability will continue to be an issue and contracts and applications that require instant or near real time execution will suffer from this lack of speed and scale. Se</div>

...

Cancel

Safety in the Workplace: Big Safety for Little Cost - Creative Safety - 0 views

blog.creativesafetysupply.com/ace-big-safety-for-little-cost

safety in the workplace