Group items tagged

A step by step guide to configure facebook instant articles.Follow these steps to set up Facebook instant articles.

The second thing we do after reading a perfectly written content is checking out the author bio of the article and other articles written by the author. Author bio box is nothing but a box at the bottom of each post in WordPress website which provides short bio information about the author of that article

Since the inception of factory production in the industrial revolution, safety has been a concern. However, safety today looks nothing like it did back then. We now have OSHA and other government groups, unions, and lobbies that safeguard the safety of workers and make sure that they are adequately provided for. In addition, workers themselves have more rights in suing an employer over unsafe conditions and receiving compensation in the event of an incident that leaves them injured. Especially if an injury prevents them from providing for their family. The point is, a lot has changed over the past few hundred years in workplace safety, and those changes have unanimously been in the best interests of the workers that inhabit those workplaces. However, just as changing times caused safety evolution in the past, it is important that this trend continues now with the advent of things such as the internet, tablets, smart phones, and more. Safety is no longer limited to physical seminars and training sessions. That being said, let's take a look at exactly how you can use technology and engagement to enhance your safety efforts. eNewsletter to Employees One way that employers are reaching their employees both in a new way and outside of the physical confines of the work area is through email newsletters. The vast majority of working adults (and most every demographic, for that matter) are online these days and employers need to make sure they are taking advantage of that online time and platform. Formatting an email newsletter is great because it can be easily sent out to every single employee in your workforce. This can be used for general company news and the like, but can also be used to send out weekly safety lessons or reminders for employees about any witnessed unsafe behavior. To get started down this round, you'll need to make sure your emails get opened and engaged with. Here are a couple of ways to do that: 1. Keep your subject lines short but catchy. Sub

Pandemic & Natural Flu Prevention with Simple Daily Habits The current Coronavirus Pandemic sweeping the world is causing all of us to look at our daily habits. Most of the focus has been on hand sanitation, covering your mouth if you cough or sneeze, and keeping your distance from people who may be at risk of spreading the virus. However, a more prudent action to take would be to look at the daily habits you have in place which could protect you long term from being in the high risk group of most likely to suffer severe consequences from contracting a virus such as COVID-19. Rather than resort to waiting for an immunization to emerge, you could start now to adopt daily habits that support natural pandemic and flu prevention. This high risk group comprises people over the age of 60 who are immune compromised and/or have an underlying health condition that makes them more susceptible to disease and death from that disease. Unfortunately, the health of our population as a whole has been declining for many years now. Have a look at some of the statistics: From 1990 to 2013 there was a 141% increase in deaths from Heart Disease. From 1996 to 2009 there was a 145% increase n people suffering from Asthma From 1999 to 2015 there was a 150% increase in Inflammatory Bowel Disease From 1990 to 2015 there was a 250% increase in Epilepsy From 1999 to 2010 there was a 300% increase in Diabetes From 1996 to 2018 300% more births required fertility treatments. From 1991 to 2015 there were 783% more deaths from Alzheimer's Disease From 1990 to 2018 there was a 4,200% increase in Autism Common diseases are now increasing at epidemic rates, but none of this is hitting the headlines of our mainstream media! What could be causing this massive decline in our population's health, and therefore making us more vulnerable to pandemics like COVID-19 and seasonal flu viruses? Nutrient Deficiency Diseasesmineral-defiency-deseases-and nutrient deficiencyDr Wallach has been saying for man

Read reader's digest online free were Our Authors write stories free for World So be fast and Publish your stories
and read reader's digest online free -Todays Most Read Articles Of Year
Write for people and share ask share your top collection of popular Articles,News,offer,services,tips,Jobs,photos
with world

Safety Myths We Could All Live Without Safety MythsI'm going to level with you today: There's a lot, and a mean a metric ton, of misinformation when it comes to safety in the workplace. The more experience you have, the more and more you discover which of the things you've been told actually seem to hold up to the action of a real workplace, and which advice becomes clearly idealistic and less useable. That said, why can't we just skip past the clutter? Why do myths about the nature of safety and accident prevention continue to circulate when experienced practitioners know them to be complete bologna? To be honest, I can't answer that, but hopefully what I can do is more useful; in this article, we're going to go over some common workplace safety myths and dissect them so that, with a whole lot of luck, they won't leave anyone's lips ever again. Accidents Happen Safety Myths AccidentsFirst of all, yes, accidents do happen… but the statement itself is dismissive, and suggests that some things are just out of our control. The problem with this sentiment is twofold. First of all, it's a slippery slope: If you decide one thing is out of your control, it's easier to accept that another thing might be as well. Before you know it, you're leaving too much up to chance and not enough up to your problem solving skills. The second problem is that the idea that accidents just "happen" of their own accord is silly and untrue. There is always something you can do, and you should always be actively improving your safety by finding these things as they come along. One counter example to this that people sometimes come up with is a case in which an employee does something really boneheaded and gets themselves into a dangerous situation. "Isn't that kind of out of my control?" one might ask. Actually, there are two possible situations here: 1. The worker deliberately put themselves in harm's way for some unknown reason. In this case, a resu

A report by the AmericanManufacturing.org website and a recent Pew Research Center article both focus on the discordance in opinion between the general public and elite economic and legislative policymakers on the threat of China to U.S. jobs and fiscal matters. Chinese Manufacturing The general public, who largely contributes to the tax and voting base and to the domestic economy and workforce of the United States, is not accurately being represented by these "elite" lawmaker, financiers, and economists, according to these two articles. Despite a growing insecurity by the American public and advice from former military leaders, many of our elite financial, political, and historical leaders have remained strangely blinded by the large scale offshoring of U.S. jobs to the China, not to mention the growing debt we have incurred from them. The loss of domestic manufacturing jobs is almost directly proportionate to the increase in Chinese manufacturing jobs, and it is difficult to understand that this fact is hard for "elite" minds to grasp - from the very obvious U.S. Dept of Labor statistical evidence offered below: U.S. manufacturing employment in January 2000: 17,292,000 U.S. manufacturing employment in January 2012: 11,860,000 Annual U.S. trade deficit with China in 2000: $83.8 billion Annual U.S. trade deficit with China in 2011: $295.4 billion I think these stats say a lot about our country's current economic state, and I'm not sure why our politicians, economists, and corporate leaders are choosing to ignore them. Or, maybe they know something we don't. Wait, that is starting to sound like a crazy conspiracy theory.

So here's how today started out… We got an email from a guy who took issue with one of our recent infographics, 10 Astonishing Facts About Arc Flash. Here's what he wrote: "Have you seen the commercial for the insurance company that uses the premise "If it's on the the Internet, it must be true"? I have still not seen the source of these statistics. The Capschell report is what all of these websites, all of which involved in the business of Arc Flash for profit ($$$$), including yours, use without merit. […] Even NFPA 70E does not not cite the source of the statistic regarding "2000 injuries per day". Don't just give me another website that says that again, show me source (ie the study) that produces those statistics. I am not, by any means, attempting to reduce the importance of arc flash, arc flash studies or PPE. I just have a problem when companies use these types of statistics without regard to the source or veracity of the information. Fear Mongering is the term that come to mind. It's on the internet so it must be true." I believe whole-heartedly that our marketing team did a significant amount of research on Arc Flash prior to creating this infographic, and I don't believe the intent of our marketing team to promote or perpetuate bad information. However, I can understand this person's sentiment, and I wanted to know myself what the real numbers were. So, the hunt for accurate data began. Before I go further, it should be addressed that our infographic says that there are 2,000 injuries each year, not every day. Still, where did this figure come from? I started searching to uncover where the 2,000 injuries per year came from. I asked the marketing team for their source, and they provided me with the official NFPA 70E 2012 Handbook. In Annex K(3), it states plainly that 2,000 people a year are injured as a result of arc flash. But, as our accuser points out, there is no citation. Because this is NFPA, a standardization or

Back pain and injuries account for some of the most reported and most serious common workplace injuries worldwide. In fact, you'd be hard-pressed to find a country whose labor department doesn't dedicate pages of literature to both employers and employees solely on this topic. Loss of work days and productivity, lifelong injuries and disabilities, and short term discomfort are all common results of lower back-related incidents. According to an OSHA fact sheet, More than one million workers suffer back injuries each year, and back injuries account for one of every five workplace injuries or illnesses. Further, one-fourth of all compensation indemnity claims involve back injuries, costing industry billions of dollars on top of the pain and suffering borne by employees. okstate.edu - OSHA Fact Sheet While employers have a responsibility to their workers to implement training programs that minimize injuries (and proactively improve the ergonomics of work-related tasks), employees also need to respect their own bodies and know their limits. This article will be broken up into several sections, each relating to specific aspect of lower back injuries in the workplace, with a primary focus on prevention. Anyone reading through should have a solid grasp on this all-too-common workplace plague by the end of their brief time here. Let's begin. Eliminate Back Injuries While we'll get to proper lifting technique and some employee-level suggestions in a minute, one of the best things employers can do is actually seek to eliminate lower back hazards from their workplace altogether; this is known as elimination - getting rid of risks period - and should be your first step in improving safety before moving on to prevention - mitigating risks that you and your workers have to live with in order for your business to function. Most lower back injuries are associated with lifting, and the most dangerous zones for humans are when lifted objects are below the knees or

"Green Machine" (photo courtesyof Gulfcoastgreenenergy.com) I read a really neat article today on the Gulf Cost Green Energy website, titled "Going Green: The Practical Payoffs of Geothermal Energy," that reported about a guy in Texas named Loy Sneary who has a machine that can convert wasted energy from steam stacks, boilers, and oil wells. According to Mr. Sneary, we waste almost 60% of the energy we use to create heat or electricity. His machine is kind of like a fancy heat pump/steam generator, and just maximizes energy through heat induction between heated air or water and a refrigerant that converts to pressurized steam inside a coil that is then used to generate electricity-all without any emissions. Frankly, I'm not a scientist or even an alternative energy expert, but it sounds reasonably logical. They rigged it up at Texas A&M apparently, and it all just worked out peachy. I'm all for greener alternative forms of energy, and this certainly seems to take the cake for that. I will certainly follow this guy's development of this technology. My only concern is that this article doesn't have too much written up on it-maybe it's hokey, or maybe it's because it's being repressed. Or, it just hasn't had anything written up on it, yet. (conspiracy theories anybody?)

Track your potential customers with the help of these top 5 marketing KPIs. Read this article to know how you will be able to attract more loyal customers.

An article looking at how businesses of all kinds can benefit through using the right type of tissue packaging for their goods.Below writeup shows how great wrapping makes for great service

Frankly speaking, Microsoft's newest operating system has come with lots of new cool features that were previously non-existent in all the other previous versions of Windows. A good example is how Microsoft decided to move from the Start feature of the older versions to a whole new Metro Start feature. Some long term users of Windows 8 might require such an Administrator Account.In this article we are going to learn on how to enable the Administrator Account in Windows 8 because in real sense it is not missing but it is disabled.

In 2018, Email marketing is more popular to promote products, to interact with customers by sending latest information. This is a very important aspect of Blogging and online marketing. Are you planning to start the email marketing to get in touch with your blog readers and to promote your products? This article is for you.

I read an interesting article today about safety by Mari-len De Guzman on Cos-Mag.com, an occupational safety e-magazine for Canadian manufacturers. At the CSSE (or, Canadian Society of Safety Engineering) conference in Niagara Falls this week, Los Alamos National Laboratory safety expert, Todd Conklin, spoke about how many manufacturing and industrial companies look at safety issues. He pointed out that, rather than continually blame operator-error for most failures and safety problems, it is more systemic, stating that: workers get hurt when they find themselves in situations where it's hard to be safe and easy to get hurt. With that in mind, he offered several potential causes for failure or safety incidents and ways to combat them. First, he said that humans make mistakes, so he advised that it is important to anticipate those potential mistakes and have several levels of defensive safety measures. Next, he suggested that companies should anticipate that unforeseeable events can happen, and WILL happen, so employers and safety managers need to keep this in mind. Learning is another tip Conklin pointed out. Whenever something bad happens, the best defense next time is to learn as much as we can from the event. We can learn many things, like defenses, unsafe speeds, too much load, proximity to dangerous equipment or products, etc. Finally, he also advised managers to approach safety or failure issues (and the operators involved) with caution. He warned that being positive and asking things in a proactive manner can give a much better reply or response, as follows: Instead of asking a worker, "what have you done, now?" ask them, "how do we set this up so failure doesn't happen again." By asking the right question, employers can get a more operational-centric answer. I really thought this was great info. It might seem like common sense to some, safety matters and needs to be one step ahead of the production line. I also more or less agree with Con

Confined Space Entry Permits - Safety Guidelines Hidden In The Cracks Dangerous, confined spaces are the stuff of horror films and cringe-worthy moments on screen, and there's a reason. Depictions of people trapped in a confined space not only play on a natural human tendency toward claustrophobia, but they also reflect a very real danger in the workplace. As such, OSHA has implemented a system of "confined space entry permits," hoping to help increase worker awareness and avoid common types of injury and death associated with working in a confined space. In this blog post, we'll cover everything from the definition of a confined space, to the details of a fully developed entry permit system. What Is A Confined Space? While the question may seem elementary, OSHA does adhere to strict definitions for confined spaces; this is important to know as a safety professional, as you'll need to be aware of which spaces require you to adhere to OSHA protocol and which don't. Basically, a confined space has to be a place that's large enough for a person to work and perform their job within, but is not intended for long term occupancy by workers. The third and final criteria is that the space has limited means of entry and exit. In short, the space is a place that someone can fit and work in for a limited time, but which impairs mobility and might be difficult to enter and, more importantly, exit quickly. What Is A Confined Space Entry Permit? Sometimes, confined spaces have additional potential risks and hazards that go above and beyond just their shape and size. In these cases, OSHA requires that permits are filed before a worker enters the space. Here are OSHA's additional criteria that indicate the necessity of a permit: The space contains or could contain a hazardous atmosphere The space is comprised of or contains a material that could engulf a worker who enters. The space has any kind of "internal configuration" that might present an additiona

On the A Lean Journey blog, Tim McMahon offered up the reins to Lean Six Sigma writer, Kathryn Thompson, about a case study in lean manufacturing and six sigma. Inappropriately titled "The Successes of Lean Manufacturing and Six Sigma: A Case Study," Thompson's post is sparse on details and any data backing up the claim that Midlake Products is a decent model for lean and six sigma. No disrespect intended toward Ms. Thomson, but this article is NOT a case study. It reads more like a press release for Midlake Products. Thompson's post gives a summary of this company's lean six sigma background and links to their website which, for all intents and purposes, is devoid of any significant examples of how they implemented lean or six sigma and what the pros/cons included. A case study is something that gives a reader some indication of a need for improvements, the processes implemented, and results. They are important documents for anyone who is contemplating starting a program and looking for basic firsthand perspectives from professionals in their industry or comparable production models. If one were to desire a real case study on the matter, I'd recommend this one from Lean Enterprise Institute for starters. It lays out the information in a more traditional way.