Changing metal windows with vinyl windows - 0 views

• 
  #1 Currin Strong on 05 Jul 13

   

  Inside our past articles I discussed all the measures required to precisely replace your old wood sash windows with energy-efficient vinyl windows. I told you how to measure for the new windows. Then we discussed the removal of the wood sashes and parting bead. Finally, I told you how to set up, seal, and trim the plastic replacement windows. But, imagine if those old windows at home are constructed with aluminum rather than wood? Is the procedure exactly the same? No, it is different at all. To get alternative interpretations, consider glancing at: jump button. So, the following few articles will describe the differences between replacing wood windows versus metal windows.
  
  When discussing the appropriate shape type for changing the wood sash windows, I explained the difference between new construction frames versus replacement frames. There's another alternative we have to think about regarding shape model, when changing aluminum windows. It's called a "retrofit" figure. Let us review each frame type. First, we've the newest building body using the nailing fin. If you choose to go this way, you have to remove the exterior around each window opening, grab the nails holding the metal window to the studs, nail in the new vinyl window, implement blinking, caulk, and re-install the exterior around each window.( I get tired just speaking about it! )In addition to being a whole lot of work, you may come across major problems attempting to install the exterior solution around each window opening. If your home has stucco, you have to test and fit the remaining portion of the stucco. It could be done, but not by you. Also most professional stucco men can not obtain a perfect match. Imagine if you have wood siding? Well, you can cut away 2" of the exterior around each window to get to the nail fin, then you can apply 1 X 2 or 1 X 3 cut around each window. Definitely not as much work while the stucco house, but possibly more work than the common homeowner cares to tackle. Imagine if each window is surrounded by stone? Let us not get there! You would have to eliminate the bricks, then re-install them all when done.
  
  Trust me, you may not want to change your old aluminum windows with new development vinyl windows. You intend to use both the alternative frame such as the one used to replace the wood sash windows, or anything called a frame, that is common in the west where stucco is really a typical exterior. Since the procedure for measuring is the same regardless of the frame design selected, the proper measuring procedure will be discussed by this article, and future articles will describe the difference in the installation process for alternative versus retrofit.
  
  If you look at the percentage of the metal frame that encircles the window opening in to your surrounding walls, you'll see three split up "legs" that form two pockets. The middle leg and the exterior leg form the primary pocket. Your display and stationary panel will be in this pocket. Inside leg and the middle leg form the next pocket, and your sliding panel is for the reason that pocket. This interesting worth reading wiki has oodles of riveting aids for the purpose of it. Get the "leg" that is the widest on all four sides. Work your tape measure from the leg on the left to the widest leg on the right, when measuring the size. This would function as narrowest description. Then, subtract 3/8" from that description. This is actually the size of the replacement window. Measure the height the same way. Measure as near to the middle of the window that you can, when measuring the height. To check up more, please consider having a glance at: garage door service santa monica. That is specially crucial on windows larger than six feet, because the top wood header tends to drop over time, making the heart of the opening the narrowest. You do not need to deduct 3/8" in the height like you did around the thickness. 1/4" is okay. These are the measurements you utilize when purchasing your vinyl window. For those who have any picture windows( windows without a vent panel), there is only going to be one pocket and two feet. You still measure the same way.
  
  A few weeks I will examine whether your house is a candidate for retrofit frames or alternative frames.
  
  John Rocco has been adding
  
  Alternative windows since 1978
  
  For more information, visit How Exactly To Install Windows.

   

  <div class="cArrow"> </div><div class="cContentInner">Inside our past articles I discussed all the measures required to precisely replace your old wood sash windows with energy-efficient vinyl windows. I told you how to measure for the new windows. Then we discussed the removal of the wood sashes and parting bead. Finally, I told you how to set up, seal, and trim the plastic replacement windows. But, imagine if those old windows at home are constructed with aluminum rather than wood? Is the procedure exactly the same? No, it is different at all. To get alternative interpretations, consider glancing at: <a href="http://www.youtube.com/watch?v=Gq_cOkCxZBk" rel="nofollow">jump button</a>. So, the following few articles will describe the differences between replacing wood windows versus metal windows. <br /> <br /> When discussing the appropriate shape type for changing the wood sash windows, I explained the difference between new construction frames versus replacement frames. There's another alternative we have to think about regarding shape model, when changing aluminum windows. It's called a "retrofit" figure. Let us review each frame type. First, we've the newest building body using the nailing fin. If you choose to go this way, you have to remove the exterior around each window opening, grab the nails holding the metal window to the studs, nail in the new vinyl window, implement blinking, caulk, and re-install the exterior around each window.( I get tired just speaking about it! )In addition to being a whole lot of work, you may come across major problems attempting to install the exterior solution around each window opening. If your home has stucco, you have to test and fit the remaining portion of the stucco. It could be done, but not by you. Also most professional stucco men can not obtain a perfect match. Imagine if you have wood siding? Well, you can cut away 2" of the exterior around each window to get to the nail fin, then you can apply 1 X 2 or 1 X 3 cut around each window. Definitely not as much work while the stucco house, but possibly more work than the common homeowner cares to tackle. Imagine if each window is surrounded by stone? Let us not get there! You would have to eliminate the bricks, then re-install them all when done. <br /> <br /> Trust me, you may not want to change your old aluminum windows with new development vinyl windows. You intend to use both the alternative frame such as the one used to replace the wood sash windows, or anything called a frame, that is common in the west where stucco is really a typical exterior. Since the procedure for measuring is the same regardless of the frame design selected, the proper measuring procedure will be discussed by this article, and future articles will describe the difference in the installation process for alternative versus retrofit. <br /> <br /> If you look at the percentage of the metal frame that encircles the window opening in to your surrounding walls, you'll see three split up "legs" that form two pockets. The middle leg and the exterior leg form the primary pocket. Your display and stationary panel will be in this pocket. Inside leg and the middle leg form the next pocket, and your sliding panel is for the reason that pocket. This interesting <a href="http://www.youtube.com/watch?v=KW34N3XV_go" rel="nofollow">worth reading</a> wiki has oodles of riveting aids for the purpose of it. Get the "leg" that is the widest on all four sides. Work your tape measure from the leg on the left to the widest leg on the right, when measuring the size. This would function as narrowest description. Then, subtract 3/8" from that description. This is actually the size of the replacement window. Measure the height the same way. Measure as near to the middle of the window that you can, when measuring the height. To check up more, please consider having a glance at: <a href="http://www.youtube.com/watch?v=161cUKHcllE" rel="nofollow">garage door service santa monica</a>. That is specially crucial on windows larger than six feet, because the top wood header tends to drop over time, making the heart of the opening the narrowest. You do not need to deduct 3/8" in the height like you did around the thickness. 1/4" is okay. These are the measurements you utilize when purchasing your vinyl window. For those who have any picture windows( windows without a vent panel), there is only going to be one pocket and two feet. You still measure the same way. <br /> <br /> A few weeks I will examine whether your house is a candidate for retrofit frames or alternative frames. <br /> <br /> John Rocco has been adding <br /> <br /> Alternative windows since 1978 <br /> <br /> For more information, visit How Exactly To Install Windows.</div>

  ...

  Cancel

To Top