PSI_ESEI

The declaration of a global element also enables the element to appear at the top-level of an instance document

, global declarations cannot contain the ref attribute, they must use the type attribute

global declarations cannot contain the attributes minOccurs, maxOccurs, or use.

If the two things are a type and an element or attribute,

What happens if we give two things the same name?

Naming Conflicts

there is a conflict

If the two things are both types

the more similar are the two things, the more likely there will be a conflict.

there is no conflic

If the two things are elements within different types (i.e. not global elements),

there is no conflict

if the two things are both types and you define one and XML Schema has defined the other, say you define a simple type called decimal, there is no conflict. The reason for the apparent contradiction in the last example is that the two types belong to different namespaces

local element

<xsd:attributeGroup ref="ItemDelivery"/>

we can create a named attribute group containing all the desired attributes of an item element, and reference this group by name in the item element declaration:

Attribute Groups

<xsd:attributeGroup id="ItemDelivery">

A schema can be viewed as a collection (vocabulary) of type definitions and element declarations whose names belong to a particular namespace called a target namespace. Target namespaces enable us to distinguish between definitions and declarations from different vocabularies.

When we want to check that an instance document conforms to one or more schemas (through a process called schema validation), we need to identify which element and attribute declarations and type definitions in the schemas should be used to check which elements and attributes in the instance document. The target namespace plays an important role in the identification process

<element name="purchaseOrder" type="po:PurchaseOrderType"/> <element name="comment" type="string"/>

<apo:purchaseOrder xmlns:apo="http://www.example.com/PO1"

<apo:comment>

The instance document declares one namespace, http://www.example.com/PO1, and associates it with the prefix apo:. This prefix is used to qualify two elements in the document, namely purchaseOrder and comment. The namespace is the same as the target namespace of the schema in po1.xsd, and so a processor of the instance document will know to look in that schema for the declarations of purchaseOrder and comment. In fact, target namespaces are so named because of the sense in which there exists a target namespace for the elements purchaseOrder and comment. Target namespaces in the schema therefore control the validation of corresponding namespaces in the instance.

Elements and attributes can be independently required to be qualified,

elementFormDefault="qualified" attributeFormDefault="unqualified"

<apo:name>Alice Smith</apo:name> <apo:street>123 Maple Street</apo:street>

To specify that all locally declared elements in a schema must be qualified, we set the value of elementFormDefault to qualified:

we can replace the explicit qualification of every element with implicit qualification provided by a default namespace

xmlns="http://www.example.com/PO1"

xml, all the elements in the instance belong to the same namespace, and the namespace statement declares a default namespace that applies to all the elements in the instance. Hence, it is unnecessary to explicitly prefix any of the elements.

Attributes that must be qualified, either because they are declared globally or because the attributeFormDefault attribute is set to qualified, appear prefixed in instance documents.

he Namespaces in XML specification does not provide a mechanism for defaulting the namespaces of attributes

attributeFormDefault="unqualified">

form="qualified"

the form attribute can be applied to an element declaration in the same manner

create schemas in which all elements are global

we have omitted the elementFormDefault and attributeFormDefault attributes in this example to emphasize that their values are irrelevant when there are only global element and attribute declarations.

<element name="purchaseOrder" type="po:PurchaseOrderType"/> <element name="shipTo" type="po:USAddress"/> <element name="billTo" type="po:USAddress"/> <element name="comment" type="string"/> <element name="name" type="string"/> <element name="street" type="string"/>

both schema approaches can validate the same, namespace defaulted, document.

n cases where a schema is designed without a target namespace, it is strongly recommended that all XML Schema elements and types are explicitly qualified with a prefix such as xsd: that is associated with the XML Schema namespace

without prefixes, then references to XML Schema types may not be distinguishable from references to user-defined types.

Element declarations from a schema with no target namespace validate unqualified elements in the instance document. That is, they validate elements for which no namespace qualification is provided by either an explicit prefix or by default (xmlns:).

As schemas become larger, it is often desirable to divide their content among several schema documents for purposes such as ease of maintenance, access control, and readability

<include schemaLocation="http://www.example.com/schemas/address.xsd"/>

<include schemaLocation="http://www.example.com/schemas/address.xsd"/> The effect of this include element is to bring in the definitions and declarations contained in address.xsd,

The one important caveat to using include is that the target namespace of the included components must be the same as the target namespace of the including schema

Bringing in definitions and declarations using the include mechanism effectively adds these components to the existing target namespace

it is possible to include more than one document using multiple include elements, and documents can include documents that themselves include other documents. However, nesting documents in this manner is legal only if all the included parts of the schema are declared with the same target namespace.

Instance documents that conform to schema whose definitions span multiple schema documents need only reference the 'topmost' document and the common namespace, and it is the responsibility of the processor to gather together all the definitions specified in the various included documents

XML Schema uses the schemaLocation and xsi:schemaLocation attributes in three circumstances.

1. In an instance document, the attribute xsi:schemaLocation provides hints from the author to a processor regarding the location of schema documents. The author warrants that these schema documents are relevant to checking the validity of the document content, on a namespace

The schemaLocation attribute value consists of one or more pairs of URI references, separated by white space. The first member of each pair is a namespace name, and the second member of the pair is a hint describing where to find an appropriate schema document for that namespace.

A schema is not required to have a namespace

and so there is a noNamespaceSchemaLocation attribute which is used to provide hints for the locations of schema documents that do not have target namespaces.

2. In a schema, the include element has a required schemaLocation attribute, and it contains a URI reference which must identify a schema document. The effect is to compose a final effective schema by merging the declarations and definitions of the including and the included schemas.

targetNamespace="http://www.example.com/IPO

targetNamespace="http://www.example.com/IPO"

<element name="shipTo" type="ipo:Address"/> <element name="billTo" type="ipo:Address"/>

<xsd:element name="item" minOccurs="0" maxOccurs="unbounded"> <xsd:complexType>

<xsd:element name="item" minOccurs="0" maxOccurs="unbounded"> <xsd:complexType>

<xsd:element name="quantity"> <xsd:simpleType>

2. In a schema, the include element has a required schemaLocation attribute, and it contains a URI reference which must identify a schema document. The effect is to compose a final effective schema by merging the declarations and definitions of the including and the included schemas.

The technique we use here to derive new (complex) address types by extending an existing type is the same technique we used in Complex Types from Simple Types (§2.5.1), except that our base type here is a complex type whereas our base type in the previous section was a simple type.

we indicate that the content models of the new types are complex, i.e. contain elements, by using the complexContent element, and we indicate that we are extending the base type Address by the value of the base attribute on the extension element.

When a complex type is derived by extension, its effective content model is the content model of the base type plus the content model specified in the type derivation. Furthermore, the two content models are treated as two children of a sequential group

xsi:type="ipo:UKAddress"

to identify exactly which derived type is intended, the derived type must be identified in the instance document. The type is identified using the xsi:type attribute which is part of the XML Schema instance namespace.

The import mechanism that we describe in this section is an important mechanism that enables schema components from different target namespaces to be used together, and hence enables the schema validation of instance content defined across multiple namespaces.

only global schema components can be imported:

Only named complex types can be imported; local, anonymously defined types cannot

When schema components are imported from multiple namespaces, each namespace must be identified with a separate import element. The import elements themselves must appear as the first children of the schema element. Furthermore, each namespace must be associated with a prefix, using a standard namespace declaration, and that prefix is used to qualify references to any schema components belonging to that namespace. Finally, import elements optionally contain a schemaLocation attribute to help locate resources associated with the namespaces

the import element has optional namespace and schemaLocation attributes.

If present, the schemaLocation attribute is understood in a way which parallels the interpretation of xsi:schemaLocation in (1).

To import components that are not in any target namespace, the import element is used without a namespace attribute (and with or without a schemaLocation attribute)

<import namespace="http://www.example.com/IPO"/>

xmlns:xipo="http://www.example.com/IPO

type="xipo:SKU"

List Types

XML Schema has the concept of a list type, in addition to the so-called atomic types that constitute most of the types listed in Table 2.

The value of an atomic type is indivisible from XML Schema's perspective. For example, the NMTOKEN value US is indivisible in the sense that no part of US, such as the character "S", has any meaning by itself.

NMTOKENS is a list type, and an element of this type would be a white-space delimited list of NMTOKEN's, such as "US UK FR"

you can create new list types by derivation from existing atomic types

<xsd:simpleType name="listOfMyIntType"> <xsd:list itemType="myInteger"/> </xsd:simpleType>

Several facets can be applied to list types: length, minLength, maxLength, pattern, and enumeration

<xsd:simpleType name="USStateList"> <xsd:list itemType="USState"/> </xsd:simpleType> <xsd:simpleType name="SixUSStates"> <xsd:restriction base="USStateList"> <xsd:length value="6"/> </xsd:restriction> </xsd:simpleType>

Note that it is possible to derive a list type from the atomic type string. However, a string may contain white space, and white space delimits the items in a list type, so you should be careful using list types whose base type is string.

The include mechanism enables you to use externally created schema components "as-is", that is, without any modification.

<redefine schemaLocation="http://www.example.com/schemas/address.xsd">

</redefine>

<complexType name="Address">

base="ipo:Address"

The redefine element acts very much like the include element as it includes all the declarations and definitions from the address.xsd file

Outside of the redefine element, any such attempt to define a complex type with the same name (and in the same namespace) as the base from which it is being derived would cause an error.

Now that Address has been redefined, the extension applies to all schema components that make use of Address

Substitution GroupsXML Schema provides a mechanism, called substitution groups, that allows elements to be substituted for other elements. More specifically, elements can be assigned to a special group of elements that are said to be substitutable for a particular named element called the head element. (Note that the head element as well as the substitutable elementsmust be declared as global elements

Elements in a substitution group must have the same type as the head element, or they can have a type that has been derived from the head element's type

<element name="shipComment" type="string" substitutionGroup="ipo:comment"/>

<ipo:shipComment>

substitutionGroup="ipo:comment"/>

<ipo:customerComment>

The existence of a substitution group does not require any of the elements in that class to be used

Abstract Elements and TypesXML Schema provides a mechanism to force substitution for a particular element or type. When an element or type is declared to be "abstract", it cannot be used in an instance document. When an element is declared to be abstract, a member of that element's substitution group must appear in the instance document. When an element's corresponding type definition is declared as abstract, all instances of that element must use xsi:type to indicate a derived type that is not abstract.

Declaring an element as abstract requires the use of a substitution group. Declaring a type as abstract simply requires the use of a type derived from it (and identified by the xsi:type attribute) in the instance document

the redefine mechanism we describe here enables you to redefine simple and complex types, groups, and attribute groups that are obtained from external schema files. Like the include mechanism, redefine requires the external components to be in the same target namespace as the redefining schema,

xsi:type="Car"

abstract="true"

extension base

abstract="true"

extension

extension

Controlling the Creation & Use of Derived Types

schema authors will sometimes want to control derivations of particular types, and the use of derived types in instances.

to specify that for a particular complex type, new types may not be derived from it, either (a) by restriction, (b) by extension, or (c) at all.

The restriction value of the final attribute prevents derivations by restriction. Preventing derivations at all, or by extension, are indicated by the values #all and extension respectively

an optional finalDefault attribute on the schema element whose value can be one of the values allowed for the final attribute. The effect of specifying the finalDefault attribute is equivalent to specifying a final attribute on every type definition and element declaration in the schema.

When a simple type is defined, the fixed attribute may be applied to any of its facets to prevent a derivation of that type from modifying the value of the fixed facets.

fixed="true"

eplacement by derived types can be controlled using the block attribute in a type definition

final="restriction"

final="restriction"

final="restriction"

block="restriction"

Preventing replacement by derivations at all, or by derivations-by-extension, are indicated by the values #all and extension respectively. As with final, there exists an optional blockDefault attribute on the schema element whose value can be one of the values allowed for the block attribute.

a mechanism that controls which derivations and substitution groups may be used in instance documents

substitutionGroup=

global declarations cannot contain the attributes > minOccurs > , > maxOccurs > , or > use > . >

The schemaLocation attribute value consists of one or more pairs of URI references, separated by white space. The first member of each pair is a namespace name, and the second member of the pair is a hint describing where to find an appropriate schema document for that namespace

there is a noNamespaceSchemaLocation attribute which is used to provide hints for the locations of schema documents that do not have target namespaces.

the include element has a required schemaLocation attribute, and it contains a URI reference which must identify a schema document.

the import element has optional namespace and schemaLocation attributes. If present, the schemaLocation attribute is understood in a way which parallels the interpretation of xsi:schemaLocation

The default value for both the minOccurs and the maxOccurs attributes is 1.

Be sure that if you specify a value for only the minOccurs attribute, it is less than or equal to the default value of maxOccurs,

Attributes may appear once or not at all, but no other number of times

mechanism that enables schema components from different target namespaces to be used together, and hence enables the schema validation of instance content defined across multiple namespaces.

Importing Types

only global schema components can be imported:

Only named complex types can be imported; local, anonymously defined types cannot.

each namespace must be identified with a separate import element.

The import elements themselves must appear as the first children of the schema element

each namespace must be associated with a prefix, using a standard namespace declaration

import elements optionally contain a schemaLocation attribute to help locate resources associated with the namespaces.

ref="xipo:

Deriving Types by Extension

we indicate that the content models of the new types are complex, i.e. contain elements, by using the complexContent element, and we indicate that we are extending the base type Address by the value of the base attribute on the extension element.

xsi:type="ipo:UKAddress">

xsi:type="ipo:USAddress">

Deriving Complex Types by Restriction

the values represented by the new type are a subset of the values represented by the base type (as is the case with restriction of simple types).

<complexContent> <restriction base=

Table 3 shows several examples of how element and attribute declarations within type definitions may be restricted

Wildcard Description * Matches any element node @* Matches any attribute node node() Matches any node of any kind

Predicates Predicates are used to find a specific node or a node that contains a specific value.

Predicates are always embedded in square brackets.

[last()]

[position()<3]

title[@lang]

[@lang]

[@lang='eng']

[price>35.00]

[1]

orrect Style Sheet Declaration The root element that declares the document to be an XSL style sheet is <xsl:stylesheet> or <xsl:transform>.

<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">

<xsl:transform version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">

Link the XSL Style Sheet to the XML Document Add the XSL style sheet reference to your XML document

<?xml-stylesheet type="text/xsl" href="http://www.w3schools.com/cdcatalog.xsl"?>

xmlns:xsl="http://www.w3.org/1999/XSL/Transform" points to the official W3C XSLT namespace.

XSLT Uses XPath XSLT uses XPath to find information in an XML document. XPath is used to navigate through elements and attributes in XML documents.

How Does it Work? In the transformation process, XSLT uses XPath to define parts of the source document that should match one or more predefined templates. When a match is found, XSLT will transform the matching part of the source document into the result document.

Legal filter operators are: =  (equal) != (not equal) < less than > greater than

Since an XSL style sheet is an XML document itself, it always begins with the XML declaration: <?xml version="1.0" encoding="ISO-8859-1"?>

<xsl:stylesheet>, defines that this document is an XSLT style sheet document

The content inside the <xsl:template> element defines some HTML to write to the output.

Nmtoken   ::=    (NameChar)+

Attributes are optional by default. To specify that the attribute is required, use the "use" attribute: <xs:attribute name="lang" type="xs:string" use="required"/>

targetNamespace="http://www.w3schools.com" indicates that the elements defined by this schema (note, to, from, heading, body.) come from the "http://www.w3schools.com" namespace.

xmlns:xs="http://www.w3.org/2001/XMLSchema" indicates that the elements and data types used in the schema come from the "http://www.w3.org/2001/XMLSchema" namespace.

This attribute has two values. The first value is the namespace to use. The second value is the location of the XML schema to use for that namespace

xmlns="http://www.w3schools.com" indicates that the default namespace is "http://www.w3schools.com".

Referencing a Schema in an XML Document

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.w3schools.com note.xsd"

prefixed with xs:

<choice> indicator specifies that either one child element or another can occur

Occurrence indicators are used to define how often an element can occur.

The <sequence> indicator specifies that the child elements must appear in a specific order:

The <maxOccurs> indicator specifies the maximum number of times an element can occur:

For all "Order" and "Group" indicators (any, all, choice, sequence, group name, and group reference) the default value for maxOccurs and minOccurs is 1.

The <minOccurs> indicator specifies the minimum number of times an element can occur:

To allow an element to appear an unlimited number of times, use the maxOccurs="unbounded" statement:

Group indicators are used to define related sets of elements.

<xs:group name="groupname">

After you have defined a group, you can reference it in another definition

<xs:group name="persongroup">

<xs:group ref="persongroup"/>

<xs:attributeGroup name="groupname">

<xs:attributeGroup ref="personattrgroup"/>