Group items tagged

Contractors can take comprehensive advantage of BIM in MEP modeling to enhance collaboration, simplify projects, and reduce risk across the entire project. BIM MEP modeling assists contractors with 3D Modeling, shop drawings, fabrication drawings, MEP collision identification, BOM's, schedules, and more. Contractors can latch onto BIM MEP design for better project planning, trade collaboration, and better resource control.

Accurate MEP BIM modeling and coordination ensures seamless and accurate completion of the construction project. Also, MEP 3D models and MEP coordination drawings developed in Autodesk Revit helps engineers and architects to plan the design efficiently.

Converted 2D Drawing into 3D MEP model for Commercial Building using Revit MEP for our USA based client. Check the full case study for more information.

MEP clash detection helps in speeding up construction projects by identifying clashes between several models during the design stage, helps construction professionals such as architects, consultants, contractors, etc to reduce delays, material waste and multi-level design changes to save cost and time of project completion. We deliver MEP clash detection services to various projects like airport construction, shopping malls, hotels, hospital & educational buildings, industrial complexes. Contact us today.

A project management solutions firm from Saudi Arabia needed to develop a coordinated BIM model for a University Hospital Building. They needed an accurate coordinated 3D BIM model in LOD 500 that would enable them to attain better ROIs with scheduling. Using BIM MEP Modeling services we delivered a clash-free 3D BIM model in LOD 500 to the client which helped streamline construction activities, reduce rework and save time during construction.

BluEntCAD uses Revit software to design, develop, draft and 3D model for all types of architectural, structural and MEP projects.

As we have discussed in some of our recent articles, commercial kitchens have special requirements that must be considered by MEP design engineers. This also applies for fire suppression systems, since kitchens have more flammable substances and potential fire sources compared with most other commercial locations.

Energy efficiency measures reduce the long-term ownership cost of a building, in exchange for an upfront investment. However, it is possible to go wrong with energy efficiency, especially when upgrades are deployed without a proper energy audit. This article describes some common mistakes and how to avoid them.

From the conceptual phase through construction our architectural BIM services help architectural design firms, general contractors, EPCs, MEP contractors, and construction firms inefficient planning, designing, and construction of buildings and infrastructure development projects in USA. Tell us about your project needs or send your project details at info@hitechbimservices.com.

Looking for Retail store designer or Retail Fixtures? We at Retails, brings the brands to life at their new brick-and-mortar stores by developing right from their technical HVAC and MEP drawings & specs to designing premium furnitures & fixtures concepts.Expressing the brands personality through the store interiors and brand communications - where the product is displayed, easily enabling customers to try before they buy.

The New York City Fire Code explains what types of buildings require a sprinkler system. It's It is important to note that the requirement, New York City office buildings over 100 feet in height will have to install automatic sprinklers. Local law 26 mandates that these large office buildings it must be required automatic sprinklers.

Cooling towers are simple, but often are not the most efficient option. There are alternatives offering enhanced energy efficiency and simpler maintenance. Measure your heating and cooling loads. Right size your heating and cooling systems. Replace your chillers with new, more energy-efficient. Upgrade your heating and cooling system components. Install variable-speed drives (VSDs) on your pumps and cooling tower fans.

When there is fire in a building, our instinctive reaction is to escape. However, the general public is less aware of the risks associated with smoke. First of all, smoke limits visibility, making it difficult to escape from a building in flames and also hindering rescue efforts by the NYC Fire Department. Many people are also unaware that smoke can kill just like fire, due to the toxic substances it contains; carbon monoxide is of special concern, since it can cause unconsciousness within seconds and death within minutes when highly concentrated.

The incentives available in New Jersey for electrical HVAC upgrades in commercial and industrial buildings. These are available through the NJ Clean Energy Program, specifically through a subprogram called SmartStart Buildings. However, many gas-fired equipment upgrades are also covered by rebates, where the common denominator is reducing energy costs and carbon emissions.

Circuit breakers are fundamental elements for a safe and code-compliant electrical installation. Conductors and electrical equipment are exposed to damage and malfunction, and there is always a risk that someone may connect a device incorrectly or use it for the wrong application. These conditions can cause a device to draw current above its rated value, and the corresponding circuit breaker trips to disconnect the fault.

uilding access can be blocked partially or completely during a fire or other emergency situations, which means firefighters need alternate ways to enter or leave the building. Since rooftops can be used for these purposes, the NYC Fire Code establishes minimum clearances and accessibility requirements.

The main purpose the NY State Energy Research & Development Authority (NYSERDA) is helping the state of New York become more energy efficient, while transitioning to a cleaner grid powered by renewable sources. NYSERDA provides both technical assistance and funding for projects that fall under its areas of oversight.

New York Engineers' founding principal Michael Tobias, shared his views in The New York Times about Trump tower fire and called for a law requiring older residential buildings to install sprinklers.The original article can be read over here.

New York Engineers operate nationwide and internationally, offering Mechanical, Electrical, Plumbing, Sprinkler and Fire Protection Engineering services, as well as Building Condition Assessments & Commissioning, LEED Consulting, Energy Modeling, Design Reviews, and much more.

New York Engineers operate nationwide and internationally, offering Mechanical, Electrical, Plumbing, Sprinkler and Fire Protection Engineering services, as well as Building Condition Assessments & Commissioning, LEED Consulting, Energy Modeling, Design Reviews, and much more.