Group items tagged
Internetworking Basics - 2 views
NAT Names - 0 views
When Do We Use NAT? - 0 views
Types of Network Address Translation - 0 views
Static NAT Configuration - 0 views
Dynamic NAT Configuration - 0 views
Simple Verification of NAT - 0 views
Configuring NAT Using SDM - 0 views
Advantages of Reference Models - 0 views
The OSI Reference Model - 0 views
The Layered Approach - 0 views
Testing and Troubleshooting NAT - 1 views
How NAT Works - 1 views
Configuring NAT on Our Internetwork - 3 views
Internetworking Models - 2 views
Introduction to Wireless Technology - 0 views
-
Wireless LANs (WLANs) use radio frequencies (RFs) that are radiated into the air from an antenna that creates radio waves. These waves can be absorbed, refracted,or reflected by walls, water, and metal surfaces, resulting in low signal strength.
2.4GHz (802.11b) - 0 views
-
The 802.11b standard has been widely adopted by both vendors and customers who found that its 11Mbps data rate worked pretty well for most applications.
Configuring Our Wireless Internetwork - 0 views
-
Configuring through the SDM is definitely the easiest way to go for wireless configurations, that is, if you're using any type of security. And of course you should be! Basically, all you need to do to bring up an access point is to just turn it on. But if you do have a wireless card in your router.
Comparing 802.11 - 0 views
-
Cisco-specific products, take at look at Table 1, which lists the pros and cons of 802.11a, b, and g.