Group items tagged

Pure water instead of lubricating oil is used in air end for lubrication. Air end and all parts contacting with water are made of 304 food grade stainless steel. Compressed air passes TUV oil free test and also meets requirements of FDA and GMP. With no oil in the whole machine, maintenance is simple which only requires the replacement of air and water filter. Water injected screw compressor adopts a direct coupling method between the air end and the motor, resulting in high transmission efficiency. Due to the direct injection of water for cooling circulation, the unit operates at a very low temperature which is around 45 degrees Celsius. Working Principle Of CMN No Oil water injected compressor The single screw air end is composed of a main screw and two symmetrically arranged flat star wheels to form a meshing pair, installed inside the stainless steel shell. The screw's groove, the inner wall of the air end shell, and the tooth surface of the star wheel constitute the compression chamber. The motor directly drives the rotation of the screw shaft, which drives the rotation of the star wheel. The gas enters the screw groove through the suction port, undergoes compression, and is then expelled through the exhaust port on the air end shell. There are spray holes on the air end shell for injection of lubricating oil or water into the compression chamber, serving as sealing, cooling, and lubricating functions.