5" Remodel IC Airtight Housing 5" LED housings offers affordable solutions for new technology along with energy savings. The LED Driver is attached to the housing to allow ease of installation. "IC" Insulated Ceiling housings are direct contact rated- no minimum clearances is required. High tension tempered steel springs secure remodel housings evenly to ceiling. Variety of Incandescent and Electronic Low Voltage Dimmers are compatible with Nora's LED trims. Incandescent dimmers have a minimum circuit load of 4 LED Recessed fixtures. Electronic Low Voltage dimmers do have a minimum load requirement. UL Listed for Wet Location UL Listed for Damp Location w/ Feed Through, Title 24 Compliant Economical 2-wire dimming down to 3%. 50,000 hours at 70% lumen maintenance rated life. Lamp:12 Osram LEDs at 1.2W each 120V AC, 60Hz, Power Factor > 0.9 at 120V. Dimmable with most incandescent 2-wire dimmers. Mounted to the junction box for cool operation and easy access. Dimension:Length: 13", Width: 6-1/4", Depth: 7-1/2", Ceiling Opening: 5-5/8"

5" New Construction IC Airtight Housing "IC" Insulated Ceiling housings are direct contact rated- no minimum clearances is required 5" LED housings offers affordable solutions for new technology along with energy savings. The LED Driver is attached to the housing to allow ease of installation. Mounted to the junction box for cool operation and easy access. Class 2 driver. Variety of Incandescent and Electronic Low Voltage Dimmers are compatible with Nora's LED trims. Incandescent dimmers have a minimum circuit load of 4 LED Recessed fixtures. Electronic Low Voltage dimmers do have a minimum load requirement. Two 13-3/4" to 24-1/2" adjustable bar hangers with captive nails are included on the frame. Bar hangers are parallel to junction box, but can be repositioned 90 degrees. UL Listed for Wet Location UL Listed for Damp Location w/ Feed Through, Title 24 Compliant Lamp: 12 Osram LEDs at 1.2W each 120V AC, 60Hz, Power Factor > 0.9 at 120V. Dimmable with most incandescent 2-wire dimmers. Dimension: Length: 10-1/2", Width: 7-1/4", Depth: 7-1/2", Ceiling Opening: 5-5/8"

5" Shallow LED Airtight Remodel IC Housing, Dimmable 3000ºK Height: 5 1/2", Opening: 5 1/2" Advanced heat sink design for best heat dissipation to maintain maximum LED module life. Over 680 lumens effective light output(with baffle trim) Warm White(3000ºK) Meets restricted air flow requirement(per ASTME-283), CA Title 24 compliant and Energy Star requirements. For use in insulated ceilings. Lamp: 14W LED module, 3000ºK, 680 lumens Driver- 120V AC, 0.14A high quality driver

Rail Finishes: Brushed Nickel (BN), Bronze (BZ), Silver (S) Rail Kit includes: (1) 4' Pre-Bent Rail (NRS90-R24-I: Inside Bars) (1) 4' Pre-Bent Rail (NRS90-R24-O: Outside Bars) (1) 3" Power Stem (NRS90-P11) (1) Canopy for Power Stem (NRS90-P13) (2) 3" Standoff Support (NRS90-N73) (4) Argon Fixtures (NRS11-102) Features: Line Voltage No transformer to worry about Easily dimmed Kit can accommodate any fixtures, pendants and/or additional rails up to 2400 watts Fixtures, standoffs, and power stemcanopy are moveable and can be placed anywhere on the rail cULus listed Lamp: (4) 50W MR16 GU10 (included) Dimension: 8' Length

5" LED Shallow New Construction IC Airtight Housing, Dimmable, 3000ºK Height: 5 1/2", Opening: 5 1/2" Galvanized Steel Construction Frame Captive bar hangers span 24" joists & can be repositioned 90º. Advanced heat sink design for best heat dissipation to maintain maximum LED module life. Over 680 lumens effective light output (with baffle trim) Warm white (3000ºK) Meets restricted airflow requirement (per ASTME-283), CA Title compliant and Energy Star requirements. For use in insulated ceilings. Lamp: 14W LED module, 3000ºK, 680 lumens Driver-120V AC, 0.14A high quality driver

4" Remodel IC Airtight Housing 4" LED housings offers affordable solutions for new technology along with energy savings. The LED Driver is attached to the housing to allow ease of installation. Variety of Incandescent and Electronic Low Voltage Dimmers are compatible with Nora's LED trims. Incandescent dimmers have a minimum circuit load of 4 LED Recessed fixtures. Electronic Low Voltage dimmers do have a minimum load requirement. "IC" Insulated Ceiling housings are direct contact rated- no minimum clearances is required High tension tempered steel springs secure remodel housings evenly to ceiling. UL Listed for Wet Location UL Listed for Damp Location w/ Feed Through, Title 24 Compliant Lamp: 9 Osram LEDs at 1.2W each are available in two different temperatures with dimmable capabilities down to 3%. 120V AC, 60Hz, Power Factor > 0.9 at 120V. Dimmable with most incandescent 2-wire dimmers. Mounted to the junction box for cool operation and easy access. Class 2 driver. Dimension: Length: 13-1/8", Width: 4-3/4", Depth: 6-3/8", Ceiling Opening: 4-1/4"

4" New Construction IC Airtight Housing 4" LED housings offers affordable solutions for new technology along with energy savings. The LED Driver is attached to the housing to allow ease of installation. Variety of Incandescent and Electronic Low Voltage Dimmers are compatible with Nora's LED trims. Incandescent dimmers have a minimum circuit load of 4 LED Recessed fixtures. Electronic Low Voltage dimmers do have a minimum load requirement. "IC" Insulated Ceiling housings are direct contact rated- no minimum clearances is required Two 13-3/4" to 24-1/2" adjustable bar hangers with captive nails are included on the frame. Bar hangers are parallel to junction box, but can be repositioned 90 degrees. UL Listed for Wet Location UL Listed for Damp Location w/ Feed Through, Title 24 Compliant Lamp: 9 Osram LEDs at 1.2W each are available in two different temperatures with dimmable capabilities down to 3%. 120V AC, 60Hz, Power Factor > 0.9 at 120V. Dimmable with most incandescent 2-wire dimmers. Mounted to the junction box for cool operation and easy access. Class 2 driver. Dimension: Length: 12-5/8", Width: 8-1/8", Depth: 6-3/8", Ceiling Opening: 4-1/4"

LED 4" Insert Kit Quick terminal connector Advanced heatsink design for best heat dissipation to maintain maximum LED module life Suitable for use in fixtures installed in insulated ceilings The ELD4RT insert is a 2-wire connector unit for installation into cans with a mating 2 wire connector only. To use the ELD4RT insert in an incandescent can with medium base socket, the "PSA30 adaptor" (medium socket to 2-wire connector) must be ordered separtely. Not included. 10W CREE LED chips, CRI 85 120V AC, high quality driver, Dimmable Meets restricted air flow requirement (per ASTME-283). CA Title 24 compliant and meets Energy Star requirements Limited 3 year warranty UL Listed Model: ELD4RT1227-2700°K, 10W LED, 430 lm ELD4RT1240- 4000°K, 10W LED, 430 lm Note: Trims sold separately.

4" LED Airtight Remodel IC Housing, Dimmable,3000ºK Height: 5 1/2", Opening: 4 1/4", Trim O.D. 4 7/8" Advanced heat sink design for best heat dissipation to maintain maximum LED module life. Over 510 lumens effective light output (with baffle trim) Warm White(3000ºK) Meets restricted air flow requirement (per ASTM E-283), CA Title 24 compliant, and Energy Star requirements. For use in insulated ceilings. Lamp: 12W LED module, 350mA DC, 3000º K Driver-120V AC, 0.14A high quality driver

4" LED Airtight New Construction IC Housing, Dimmable,3000ºK Height: 7 1/4", Opening: 4 3/8", Trim O.D. 4 7/8" Double Wall Housing Galvanized steel construction frame Captive bar hangers span 24" joists and can be repositioned 90º Advanced heat sink design for best heat dissipation to maintain maximum LED module life. Over 650 lumens effective light output (with baffle trim) Warm White(3000ºK) Meets restricted air flow requirement (per ASTME 283), CA Title 24 compliant, and Energy Star requirements. For use in insulated ceilings. Lamp: 14W LED module, 350mA DC, 3000ºK Driver-120V AC, 0.14A high quality driver

Rail Finishes: Brushed Nickel (BN), Bronze (BZ), Silver (S) Glass Finishes: Amber (AM), Frost (FR), Orange (O) Rail Kit includes: (1) 24" Circle Rail (NRS90-C12-I) (1) Cable Power with canopy (NRS90-P90) (3) Cable Support (NRS90-N91) (3) Swift Fixtures (NRS19-204) with choice of finish; Amber (AM), Frost (FR), or Orange (O) (2) 3" Standoff Support (NRS90-N73) (1) Straight Rail Live Connector (NRS90-P81) Features: Line Voltage No transformer to worry about Easily dimmed Kit can accommodate any fixtures, pendants and/or additional rails up to 2400 watts Fixtures, standoffs, and power stemcanopy are moveable and can be placed anywhere on the rail cULus listed Lamp: (3) 40W G9 (included) Dimension: 2' Diameter

Rail Finishes: Brushed Nickel (BN), Bronze (BZ), Silver (S) Glass Finishes: Blue (BU), Orange (O), Purple (P), White (W) Rail Kit includes: (2) 3'-3" Rail (NRS90-P033) (1) 3" Power Stem (NRS90-P11) (1) Canopy for Power Stem (NRS90-P13) (1) Straight Rail Live Connector (NRS90-P81) (2) 3" Standoff Support (NRS90-N73) (3) Pendant Cord/Socket Assemblies (NRS19-450) (3) Casie Glass (NRS80-462) with your choice of finish Blue (BU), Orange (O), Purple (P), or White (W) Features: Line Voltage No transformer to worry about Easily dimmed Kit can accommodate any fixtures, pendants and/or additional rails up to 2400 watts Fixtures, standoffs, and power stemcanopy are moveable and can be placed anywhere on the rail cULus listed Lamp: (3) 40W G9 (included) Dimension: 6'-6" Length

Rail Finishes: Brushed Nickel (BN), Bronze (BZ), Silver (S) Glass Finishes: Confetti (CF), Tri-Color (TC), Wave (WV) Rail Kit includes: (2) 3'-3" Rail (NRS90-P033) (1) 3" Power Stem (NRS90-P11) (1) Canopy for Power Stem (NRS90-P13) (1) Straight Rail Live Connector (NRS90-P81) (2) 3" Standoff Support (NRS90-N73) (3) Pendant Cord/Socket Assemblies (NRS19-450) (3) Neptune Glass (NRS80-451) with your choice of finish Confetti (CF), Tri-Color (TC), or Wave (WV) Features: Line Voltage No transformer to worry about Easily dimmed Kit can accommodate any fixtures, pendants and/or additional rails up to 2400 watts Fixtures, standoffs, and power stemcanopy are moveable and can be placed anywhere on the rail cULus listed Lamp: (3) 40W G9 (included) Dimension: 6'-6" Length

Round Angoor Beaded Shade only Fits the following mounting systems which can be selected from the Matching Components Below: Nora Rail pendant Track pendant Canopy mounted pendant QuickJack pendant Available colors: Amber (AM), Aqua (AQ), Clear (CL), Red (R) Lamp: Fits the following lamp types and wattages: Line Voltage 40W G9 Low Voltage 50W Bi-Pin G5.3/6.35 Dimension: L: 3-1/4" (83mm), D: 5" (127mm)

Cylinder Angoor Beaded Shade only Fits the following mounting systems which can be selected from the Matching Components Below: Nora Rail pendant Track pendant Canopy mounted pendant QuickJack pendant Available colors: Amber (AM), Aqua (AQ), Clear (CL), Red (R) Lamp: Fits the following lamp types and wattages: Line Voltage 40W G9 Low Voltage 50W Bi-Pin G5.3/6.35 Compact Fluorescent 13W-26W GU24 Base (Pendants only) Dimension: L: 7-1/2" (191mm), D: 4-1/2" (114mm)

Oval Angoor Beaded Shade only Fits the following mounting systems which can be selected from the Matching Components Below: Nora Rail pendant Track pendant Canopy mounted pendant QuickJack pendant Available colors: Amber (AM), Aqua (AQ), Clear (CL), Red (R) Lamp: Fits the following lamp types and wattages: Line Voltage 40W G9 Low Voltage 50W Bi-Pin G5.3/6.35 Dimension: L: 3-1/4" (83mm), D: 4" (102mm)

5" One Piece Airtight Clear Reflector Cone Trim Self Flanged Lamp: 75W PAR30, R30 Dimension: 6 1/4" O.D.

5" Phenolic Baffle Trim -Compatible with Shallow Housings Lamp: 30W-75W PAR30 or R30, Dimension: -6 1/4" O.D.

5" Metal Stepped Baffle Trim -Compatible with Shallow Housings Lamp: PAR30 75W R30 75W Dimension: -6 1/4" O.D.

5"-Airtight Metal Baffle Cone Trim -Self Flanged (one piece) Lamp: 75W PAR30 or R30, 90W-PAR38 Max or 60W A19 with EL5IC