Group items tagged

Lead Crystal Batteries Lead Crystal® batteries are designed for harsh environments. Working in temperatures above +65°C and down to -40ﾟC they can be discharged down to 0 volts and recovered daily without loss of capacity while retaining the ability to recharge twice as fast as traditional Lead Acid variants. At -40ﾟC the LC battery can provide up to 50% of the original rated capacity and at +40ﾟC will achieve seven years service life. 99% Recyclable/Greener/Safer Easy Transport - no special conditions Faster Recharging - up to twice as fast as Lead Acid Greater Cyclic Life - 6000 cycles to 20%, over 1600 to 80% DOD Reduced Maintenance High and Low Operating Temperatures: -40ﾟC to +65ﾟC Long Battery Life - up to 18 years float service life Form, Fit, Function replacement for VRLA, AGM & GEL battery ranges Applications: Lead Crystal® batteries can be used in any application where Lead Acid-AGM/GEL batteries are used today. Primarily, this means almost all battery applications found in Defence, Telecoms, Automotive, Industrial, Marine and renewable energy, health care, manufacturing, transportation and electric motion (wheelchairs, golf carts & trolleys). Also from high cycling applications to long duration high power discharges and engine starting to running the essential services on board your own personal cruiser boat Performance Robust, resilient, high performing. Lead Crystal® batteries can be discharged deeper, cycled more often (also in extreme temperatures) and have a longer service life. They recover to full rated capacity over and over again. Technology A unique micro-porous high absorbent mat (AGM), high-purity lead calcium selenium plates, safe SiO2 electrolyte solution that solidifies into a white crystalline powder when charged/discharged. Cleaner and safe Less acid, no cadmium, no antimony. Lead Crystal® batteries are up to 99% recyclable and are classified as non-haz...

ABB Critical and Safe Switched Interlock Socket Outlets, Vertical, IP67 with RCD ABB Critical Safe range of RCD protected horizontal interlocked socket outlet connectors available in 2P+E versions with 16A and 32A ratings as specified, waterproof IP67 rated. All contacts are self cleaning and calibrated to maintain accurate contact pressure over time, splash-proof IP44 rating. Critical & Safe is ideal for applications with high demands on safety, durability and performance. Ideal for applications with frequent connection and disconnection and for use in public areas, heavy industry, chemical industry, airports, hospitals and many others. Durable plastic housing Stainless steel screws 25mm diameter knock outs Standards IEC 60 309-2,-4 ABB Critical and Safe Industrial Connectors

SMC Reed Switch Auto Switch, A72/A73/A80 Series Electrical entry: Grommet. Application Load: IC circuit/Relay/PLC. Power voltage: 100, 200VAC/48V DC. Load current: 5 to 50mA. Applicable Actuator Series: CDJ2, CDVJ, CDQ2, CDXW, CDY1S, CY1L, RSDQ, MDU, CE1, MK, MK2, CXT.

As the demand for energy efficient applications grows, designers are increasingly looking for ways to implement LED in a faster and easier manner. One of the ways of achieving this is by the use of solderless LED holders. Solderless focus on easy assembly, secure attachments, and lower cost. There are numerous companies now offering solderless LED holder designs and systems. They include TE, Molex, and VCC.

The ABB rotary switch is an embodiment of versatility made simple. As the name suggests, the switch closes or opens contacts upon rotation. ABB offers a very rich portfolio of rotary switches. These switches can be used in numerous applications across many industries.

Thorlux High Bay Lights SON or Suitable Metal Halide Open Fixture Lamp. Two-part, high bay luminaires consisting of a die cast anti-corrosive aluminium ballast unit with a light grey polyester powder coated finish and a reflector in spun aluminium, brightened and anodised for broad light distribution. This is a high quality British made product ideal for use in applications such as Factory lighting, Industrial areas with high mounting heights, aircraft hangars and maintenance sheds.

P1 Series Isolators With Metal Extension Shafts 13 - 32 Amp The P1 series of switch-disconnectors with metal extension shafts are compact and robust ideal for hard wearing industrial environments with a rated uninterrupted current of up to 32 Amps. This range of isolator switch from Eaton is suitable for use in applications where there is a need to disconnect electrical equipment from the circuit. The need for this form of local isolation is most commonly needed for repair and maintenance of the electrical equipment on the de-energised circuit. These disconnect switches can also be used as safety switches.

The iMettos Serving Trolley is made of stainless Steel. Stainless steel 18 tier serving trolley, ideal for many applications. This product is covered with a Manufacturers 2 Years Parts and Labour Warranty back to base.

The RGB LED Lighting Shield provides Arduino prototypes with magnificent flash of light-free light energy. The Shield interacts as a slave with a control panel through the I2C protocol. It is possible to use either an Arduino Uno R3 or Infineon's XMC1100 Boot Kit as the master. A XMC1202 logic analyzer with a darkening power external for Lighting applications, recognized as the Brightness and Color Control Unit (BCCU), is on board the RGB LED Shield. It includes three autonomous flickering motors and nine autonomous modulated pulse density (PDM) channels. This shield uses One flickering engine and 6 streams. It can be easily configured for different light engines and offers flicker-free LED dimming and color control, rendering it an optimal product for digital design engineers and lighting designers.

Lubricators Oil fog type (stock no. 184-4407 ) automatic lubricator for general lubrication of pneumatic devices Micro-fog type (stock no. 184-4413 ) particularly useful for lengthy, complex piping systems and multiple points of application Start point is 1.5dm 3 /s at 6.3 bar Max flow rate is 67dm 3 /s at 6.3 bar inlet pressure with pressure drop 0.5 bar Zinc alloy body Aluminium bowl, 0.2 litres capacity, with prismatic sight glass Yoke required to fit Repair kit, all serviceable parts Service Kit Contents Note: This kit services both the G 1//2 oil fog and the G 1//2 micro fog lubricators. O Ring Port Seals Drain gasket O Ring Bowl Flow sensor O Ring Dome Eyelet O Ring Micro Fog Generator Dome screen O Ring Cartridge (2 off) Ball O Ring Filler Plug/Quick fill nipple Spring Note Olympian® is a registered name of Norgren.

PowerCap® Active™ IP powered respirator with universal plug Powercap® Active™ complete with BumpCap protection and Impact Faceshield, two TH1P Filters, one Battery Pack and one Charging Dock. Protection conforms to EN12941 TH1P. Equivalent to FFP2 levels with an assigned protection factor (AFP) of 10 BumpCap conforms to EN812+A1 and Face Shield conforms to EN166.1.B Avoids the need to fit test Flow gauge included enables the user to determine when the filter needs changing PowerCap unit gives a cooling, comfortable supply of filtered air at 160L/Min. equivalent to FFP2. APF = 10 FaceShield protects the user from Medium Energy, High Speed Particles, Dust and Liquid Droplets Cap protects the user against bumps and scrapes Suitable Applications - Light industrial uses, agriculture, livestock, poultry farming, bird and pigeon fanciers, woodworking, gardening, food processing and sweeping Environments where assigned protection factors of up to 10 are required or involve any asthmatic hazards Standards Filters EN12941 TH1P, Bump Cap EN812+A1, Faceshield EN166.1.B Supplied with British-, European-, American- and Australian-plug Powered & Air-Fed Respirators

ABB Easy and Safe IP44 Splashproof Plugs ABB Easy and Safe range of plugs available in 2P+E, 3P+E and 3PN+E versions with differing power handling ratings as specified. All contacts are self cleaning and calibrated to maintain accurate contact pressure over time, splash-proof IP44 rating and complete with a hanging hook.These ergonomically designed plug connectors have a combined cable clamp/cable gland where the strain relief is created by tightening the gland nut which has a locking mechanism that will ensure continuous pressure is applied. Ideal for light industrial applications, constructions sites, farms etc. IP44 Rated 16-32A Current rating as specified PA6 Plastic Material Compact design Clearly marked terminals Standards IEC 60 309-1, -2 ABB Easy and Safe Industrial Connectors Easy & Safe connectors designed for adequate functionality and ergonomic design in low power situations.

Ac Laminated High-performance pull type ac laminated solenoids in four sizes for medium and heavy-duty applications Three-point seating surface and copper shading rings reduce solenoid noise Available with 24V, 110V and 240V 50Hz continuously rated coils Moisture resistant impregnated coils are provided on all variants Dielectric strength 1500V

Light-emitting diodes(LED) modules are LED self-contained devices that are designed to either function on its own or to plug into a compatible unit. These modules are mostly used in the development of both energy-efficient and portable lighting. An LED contains several LED bulbs that are connected to a fixture that contains a battery or an alternative power supply which powers all the bulbs contained therein.LED modules can either emit white light or emit different colours based on the material they are made of. They are prominently used for advertising and signages but could as well be used for other purposes due to their versatility.

RJFTVX, RJ11FTVX Field Connectors Zone 2 A range of Atex Field Bus RJ45 and RJ11 connectors designed for device group II category 3 applications from Amphenol. The RJFTVX connectors allow the use of Cat5e networks in ATEX zone 2 environments. These metallic, rugged, sealed connectors allow the use of standard RJ45 cordsets. The RJ11FTVX connectors allow the use of standard phone RJ11/RJ12 connection in ATEX zone 2 environments. These metallic, rugged, sealed connectors allow the use of standard RJ11 / RJ12 cordsets. All models are highly reliable and excellent quality. Amphenol Field These USB Field and RJ Field reinforced Infocom Connectors allows the use of a standard USB and RJ connection in harsh environments. Standard cordsets can be inserted into metallic plugs and receptacles which will protect them from shocks, dust and fluids. There is no requirement for hazardous in-field cabling and grounding.

Zero Halogen 20mm Heatshrink Tape S1030 Hot Melt Tape A flexible, non-flame retarded, hot melt, polyolefin-based adhesive tape Suitable for applications using polyolefin and zero halogen elastomeric heat shrink materials High flexibility at high temperatures For use in marine environments Thickness: 0.3mm Length: 10m Width: 20mm S1081 Repair Tape A flexible cross-linked, heat-activated, non-flame retarded polyolefin shrinkable repair tape Used as a protective wrap on cables and irregular shapes where heat shrink is difficult to apply/install Shrinks lengthways to form a continuous cover Low profile Thickness: 0.6mm Length: 10m Zero Halogen

SMC Reed Switch Auto Switch, D-A9 Series D-A9 Series The DA-9 series reed switches utilise a magnetic sensor for pneumatic actuators. They come with built-in indicator lights and set screws. For extra versatility, they are available in both two and three-wire options in both in-line and vertical entry configurations. Possible Applications: Automotive/Heavy Vehicle Food/Beverage Forestry/Paper Products Material Handling Packaging Petroleum/Chemical Steel Textile Electronics Life Sciences Resource Voltage Rating: 5Vdc or 24Vdc Load current: 50mA or less Operating time: 1.2ms or less Durable vinyl sheath cable which is an oval shape for added flexibility Insulation resistance of 50MΩ or more at 500 Vdc Ambient temperature rating: -10 to 60 °C Standards Enclosure: IEC529 criteria IP67, JISC0920 Auto Switches