Group items tagged

Power screw. This program (algorithm) is used to design and check power screws. It is used to solve the following tasks: - Calculation of kinematic parameters (speed, torque, revolutions, and power output... - Simple selection/definition of power screw (metric, square, trapezoidal...) - Screw check for tensile/pressure, thrust, bend, buckling, and critical revolutions. - The program contains a table of materials, threads, and friction coefficients. - Support of 2D CAD systems. The calculation is based on data, procedures, and algorithms from specialized literature and AGMA, ISO, DIN, and BS standards. List of standards: (ISO 68-1, 68-2, ISO 724, ISO 965, ISO 2904: 1977, DIN 513, CSN 01 4050, CSN 01 4052, ANSI/ACME B1.5-1977, ANSI/ACME B1.9-1973, ASME B1.1-2003, IS 4694-1968....). Ball screws. This program (algorithm) is used to design, calculate and check ball screws. It is used to solve the following tasks: - Preliminary design (minimum input parameters - sufficient to navigate and select from catalogs). - Detailed analysis (load, dimensions, parameter check). - Load spectrum table definition (speed, torque, revolutions, and power output...). - Calculation of an equivalent load. - Service life calculation, tolerances, temperature analysis. - Tensile/Pressure, thrust, bend, buckling, and critical revolutions. - Lubrication proposal and efficiency calculation. - The program contains tables of screws according to ISO and ANSI. - Support of 2D CAD systems. The calculation is based on data, procedures, and algorithms from specialized literature and AGMA, ISO, DIN, and BS standards. List of standards: ISO 3408-1:2006; ISO 3408-2: 1991; ISO 3408-3:2006; ISO 3408-4:2006; ISO 3408-5:2006; ISO 286-2:2010; DIN ISO 3408; JIS B1192-1997; JIS B1192-2018; DIN 69051-5; ANSI B5.48.

Power screw. This program (algorithm) is used to design and check power screws. It is used to solve the following tasks: - Calculation of kinematic parameters (speed, torque, revolutions, and power output... - Simple selection/definition of power screw (metric, square, trapezoidal...) - Screw check for tensile/pressure, thrust, bend, buckling, and critical revolutions. - The program contains a table of materials, threads, and friction coefficients. - Support of 2D CAD systems. The calculation is based on data, procedures, and algorithms from specialized literature and AGMA, ISO, DIN, and BS standards. List of standards: (ISO 68-1, 68-2, ISO 724, ISO 965, ISO 2904: 1977, DIN 513, CSN 01 4050, CSN 01 4052, ANSI/ACME B1.5-1977, ANSI/ACME B1.9-1973, ASME B1.1-2003, IS 4694-1968....). Ball screws. This program (algorithm) is used to design, calculate and check ball screws. It is used to solve the following tasks: - Preliminary design (minimum input parameters - sufficient to navigate and select from catalogs). - Detailed analysis (load, dimensions, parameter check). - Load spectrum table definition (speed, torque, revolutions, and power output...). - Calculation of an equivalent load. - Service life calculation, tolerances, temperature analysis. - Tensile/Pressure, thrust, bend, buckling, and critical revolutions. - Lubrication proposal and efficiency calculation. - The program contains tables of screws according to ISO and ANSI. - Support of 2D CAD systems. The calculation is based on data, procedures, and algorithms from specialized literature and AGMA, ISO, DIN, and BS standards. List of standards: ISO 3408-1:2006; ISO 3408-2: 1991; ISO 3408-3:2006; ISO 3408-4:2006; ISO 3408-5:2006; ISO 286-2:2010; DIN ISO 3408; JIS B1192-1997; JIS B1192-2018; DIN 69051-5; ANSI B5.48