Group items matching

in title, tags, annotations or url

just over 843,000 kilowatt-hours of electricity were provided by solar power. The vast majority of that, more than 666,500 kWh, were produced in California. Roughly 14 percent of the total renewable energy generated in the U.S. in 2008 was solar energy. And remember that these numbers continue to grow each year. The solar industry has been growing on an average of 30-40 percent each year, and as the industry grows, so will the amount of clean, renewable power it puts out. Interested in Home Solar Energy? Fill in your details below and certified solar contractors will give you FREE estimates. What type of Solar Energy services are you interested in? * Please Select Solar Electrical Solar Thermal First Name * Last Name * Zipcode *

The EIA states that just over 843,000 kilowatt-hours of electricity were provided by solar power. The vast majority of that, more than 666,500 kWh, were produced in California. Roughly 14 percent of the total renewable energy generated in the U.S. in 2008 was solar energy. And remember that these numbers continue to grow each year. The solar industry has been growing on an average of 30-40 percent each year, and as the industry grows, so will the amount of clean, renewable power it puts out.

Biofuels have been around as long as cars have. At the start of the 20th century, Henry Ford planned to fuel his Model Ts with ethanol, and early diesel engines were shown to run on peanut oil.

idal turbines are very much like an underwater windmill where the blades are driven by consistent, fast-moving currents.  The submerged rotors harness the power of the tidal streams to drive generators, which in turn produce electricity. Water is 832 times denser than air so consequently tidal turbine rotors can be are much smaller than wind turbine rotors generate equivalent  amounts of electricity, and they can be deployed much closer together. Devices that harness tidal stream energy present a unique set of engineering challenges in terms of design, installation and maintenance. During operation, the force of the tidal flow in Strangford Lough is equivalent to a 345 mph wind generating a 100 tonnes of thrust on the rotors. The unique SeaGen design allows capture of the maximum amount of tidal energy whilst keeping maintenance and connectivity costs low.

Tidal turbines are very much like an underwater windmill where the blades are driven by consistent, fast-moving currents.  The submerged rotors harness the power of the tidal streams to drive generators, which in turn produce electricity. Water is 832 times denser than air so consequently tidal turbine rotors are much smaller than wind turbine rotors generate equivalent  amounts of electricity, and they can be deployed much closer together. Devices that harness tidal stream energy present a unique set of engineering challenges in terms of design, installation and maintenance. During operation, the force of the tidal flow in Strangford Lough is equivalent to a 345 mph wind generating a 100 tonnes of thrust on the rotors.

How much solar energy is used in the world? Global capacity for solar energy production reached 39.8 GigaWatts (0.0398 terawatts) in 2010 . Here are the top 10 solar energy producing countries in the world:

United States (1,650 MW

Geothermal electricity generation does involve a small amount of geothermal pollution in that the steam coming up from below ground carries some toxic gases, but in most plants these gases, as well as the steam, are condensed and reinjected into the ground so the effect on the environment is negligible. There are no CO2 emissions from geothermal energy so it is a much better source of electricity than coal or natural gas or nuclear (or even large-scale hydro generation which requires the flooding of large areas of land).

Geothermal electricity generation does involve a small amount of geothermal pollution in that the steam coming up from below ground carries some toxic gases, but in most plants these gases, as well as the steam, are condensed and reinjected into the ground so the effect on the environment is negligible. There are no CO2 emissions from geothermal energy so it is a much better source of electricity than coal or natural gas or nuclear (or even large-scale hydro generation which requires the flooding of large areas of land).

Geothermal electricity generation does involve a small amount of geothermal pollution in that the steam coming up from below ground carries some toxic gases, but in most plants these gases, as well as the steam, are condensed and reinjected into the ground so the effect on the environment is negligible. There are no CO2 emissions from geothermal energy so it is a much better source of electricity than coal or natural gas or nuclear (or even large-scale hydro generation which requires

Tidal turbines look like wind turbines. They are arrayed underwater in rows, as in some wind farms. The turbines function best where coastal currents run between 3.6 and 4.9 knots (4 and 5.5 mph). In currents of that speed, a 49.2-foot (15-meter) diameter tidal turbine can generate as much energy as a 197-foot (60-meter) diameter wind turbine. Ideal locations for tidal turbine farms are close to shore in water 65.5–98.5 feet (20–30 meters) deep

Geothermal energy has been used for thousands of years in some countries for cooking and heating. It is simply power derived from the Earth's internal heat.This thermal energy is contained in the rock and fluids beneath Earth's crust. It can be found from shallow ground to several miles below the surface, and even farther down to the extremely hot molten rock called magma.These underground reservoirs of steam and hot water can be tapped to generate electricity or to heat and cool buildings directly.A geothermal heat pump system can take advantage of the constant temperature of the upper ten feet (three meters) of the Earth's surface to heat a home in the winter, while extracting heat from the building and transferring it back to the relatively cooler ground in the summer

There are three types of geothermal power plants: dry steam, flash, and binary. Dry steam, the oldest geothermal technology, takes steam out of fractures in the ground and uses it to directly drive a turbine. Flash plants pull deep, high-pressure hot water into cooler, low-pressure water. The steam that results from this process is used to drive the turbine. In binary plants, the hot water is passed by a secondary fluid with a much lower boiling point than water. This causes the secondary fluid to turn to vapor, which then drives a turbine. Most geothermal power plants in the future will be binary plants.

It can be extracted without burning a fossil fuel such as coal, gas, or oil. Geothermal fields produce only about one-sixth of the carbon dioxide that a relatively clean natural-gas-fueled power plant produces.

Tidal Energy is valuable to environmentalists because unlike fossil fuels the source of energy will not be depleted in the foreseeable future no matter how much energy is collected.

For producing significant amount of energy out of tidal water turbines, range of tides should be high and substantial amount of water should be there for pushing water through the turbine.

It is significantly important to spot the appropriate place which provide suitable and sustainable conditions to produce tidal energy, there are plenty of places around the globe which provide good conditions for installing water turbines and then produce electricity use tidal power of oceans in the location.

The U.S. consumes a little more than 20 million barrels of oil a day. The largest end uses are motor gasoline (9 million barrels) and diesel (4 million barrels). That works out to about 140 billion gallons of gasoline and 60 billion gallons of diesel a year. In 2006, the U.S. consumed nearly 5.4 billion gallons of ethanol, 12 percent of which was imported. Adjusting for its lower energy content, that amounted to about 2.5% of the total U.S. demand for gasoline. Biodiesel consumption was much lower, about 250 million gallons in 2006.

The U.S. consumes a little more than 20 million barrels of oil a day. The largest end uses are motor gasoline (9 million barrels) and diesel (4 million barrels). That works out to about 140 billion gallons of gasoline and 60 billion gallons of diesel a year. In 2006, the U.S. consumed nearly 5.4 billion gallons of ethanol, 12 percent of which was imported. Adjusting for its lower energy content, that amounted to about 2.5% of the total U.S. demand for gasoline. Biodiesel consumption was much lower, about 250 million gallons in 2006. In the Energy

The U.S. consumes a little more than 20 million barrels of oil a day. The largest end uses are motor gasoline (9 million barrels) and diesel (4 million barrels). That works out to about 140 billion gallons of gasoline and 60 billion gallons of diesel a year. In 2006, the U.S. consumed nearly 5.4 billion gallons of ethanol, 12 percent of which was imported. Adjusting for its lower energy content, that amounted to about 2.5% of the total U.S. demand for gasoline. Biodiesel consumption was much lower, about 250 million gallons in 2006. In the Energy Policy Act of 2005, Congress enacted the Renewable Fuels Standard, which requires an annual increase in biofuels use to 7.5 billion gallons by 2012. The chart above details past levels of U.S. ethanol production and the minimum levels set by the Renewable Fuels Standard. In the 2006 State of the Union address, President Bush announced a goal of replacing “more than 75% of our oil imports from the Middle East by 2025.” According to the Department of Energy, meeting that goal will require 60 billion gallons of biofuels a year. A year later, the President accelerated the timetable and called for “20 in 10.”

Tidal power energy is still being studied and developed, but in the future it could be a major renewable hydropower energy source.

England, for example, could supply over 10 percent of its electricity in this way.

. Wind and solar energy generators convert much less.

Wind power is safe, clean and increasingly affordable – with the potential for production on a much larger scale.Government support is crucial in ensuring the expansion of wind power. We believe such support should be transitional and limited. In the US, there is continuing uncertainty over the renewal of the production tax credit, which provides incentives to invest in wind energy. We are working with other wind energy suppliers to make an effective case for wind energy generation and the renewal of the production tax credit.Wind farms can provide large volumes of electricity (sometimes at a lower cost than conventional power generation)

Wind power is safe, clean and increasingly affordable – with the potential for production on a much larger scale.Government support is crucial in ensuring the expansion of wind power. We believe such support should be transitional and limited. In the US, there is continuing uncertainty over the renewal of the production tax credit, which provides incentives to invest in wind energy. We are working with other wind energy suppliers to make an effective case for wind energy generation and the renewal of the production tax credit.Wind farms can provide large volumes of electricity (sometimes at a lower cost than conventional power generation) Wind energy and the environment While wind farms can be an attractive alternative energy offering, they can also stir debate. During the planning stage for each new wind farm we assess the potential social and environmental impacts.The impact on wildlife and habitat The impact of wind farms on local residentsNoise from wind turbinesShadow flicker Interference with communications signalsWe then take steps to manage any negative impacts through engineering design changes, technology and other elements.

Wind power is safe, clean and increasingly affordable – with the potential for production on a much larger scale.Government support is crucial in ensuring the expansion of wind power. We believe such support should be transitional and limited. In the US, there is continuing uncertainty over the renewal of the production tax credit, which provides incentives to invest in wind energy. We are working with other wind energy suppliers to make an effective case for wind energy generation and the renewal of the production tax credit.

Potential

Wave energy resources are best between 30º and 60º latitude in both hemispheres, and the potential tends to be the greatest on western coasts

While no commercial wave or tidal projects have yet been developed in the United States, several projects are planned for the near future, including projects in the Northwest

Each day the ocean surface rises and falls because of tides. The highest point of the rise is called high tide. The lowest point is called low tide. Most places have two high tides and two low tides each day. Tides happen because of the gravitational pull of the Moon and Sun on ocean water. The Moon has a much greater impact on tides than the Sun because it is much closer. The Moon pulls water that is closest to it making a high tide on the side of the Earth closest to the Moon and there is a high tide on the opposite side of the Earth too. Low tides happen in places between the high tides. Because Earth is rotating, the tides change over time. The difference between high tide and low tide is called the tidal range. The tidal range can be as little as a few centimeters to as much as several meters depending on the shape of the ocean floor. In Canada's Bay of Fundy the tidal range is very large – 16 meters.

Let’s not hide the fact that manufacturing solar panels requires resources, fossil fuels that release CO2 emissions and add to our carbon footprint. However, it’s been shown in numerous studies that solar panel production releases nowhere near as much CO2 and other greenhouse gases as electric generated from coal, oil, natural gas, etc. (And you still need to produce the equipment to generate electricity from those sources as well.)

The geothermal energy process extracts heat from the Earth for the purpose of generating electricity to power homes. Most development in this area is concentrated at where tectonic plates meet, such as the western coasts of North and South America, the Mediterranean and east coast of Africa and East Asia.

The U.S. could have as much as 10 gigawatts of geothermal power at its disposal if current projects under development are completed, according to a new report.

U.S. geothermal infrastructure manages 3,100 megawatts, the new projects could add an additional 7,100 megawatts, or 7 gigawatts, of energy output.