"Primary sources of noise associated with exploration include earth-moving equipment (related to road, well pad, and sump pit construction), vehicle traffic, seismic surveys, blasting, and drill rigoperations. Well drilling and testing activities are estimated to produce noise levels ranging from about 80 to 115 decibels at the site boundary. Air Quality Emissions generated during the exploration and drilling phase include exhaust from vehicular traffic and drill rigs, fugitive dust from traffic on paved and unpaved roads, and the release of geothermal fluid vapors (especially hydrogen sulfide, carbon dioxide, mercury, arsenic, and boron, if present in the reservoir). Initial exploration activities such as surveying and sampling would have minimal air quality impacts. Activities such as site clearing and grading, road construction, well pad development, sump pit construction, and the drilling of production and injection wells would have more intense exhaust-related emissions over a period of 1 to 5 years. Impacts would depend upon the amount, duration, location, and characteristics of the emissions and the meteorological conditions (e.g., wind speed and direction, precipitation, and relative humidity). Emissions during this phase would not have a measurable impact on climate change. State and local regulators may require permits and air monitoring programs. Cultural Resources Cultural resources could be impacted if additional roads or routes are developed across or within the historic landscape of a cultural resource. Additional roads could lead to increased surface and subsurface disturbance that could increase illegal collection and vandalism. The magnitude and extent of impacts would depend on the current state of the resources and their eligibility for the National Register of Historic Places. Drilling activities could result in long-term impacts on archeological artifacts and historic buildings or structures, if present. Surveys conducted during this phase

"You can drill a hole just about anywhere to get this abundant, high temperature geothermal energy, but the hole would be miles deep, and dry. It is possible to use that heat resource, but terribly expensive, and drilling is just the beginning of the expensive engineering problems of utilizing extremely deep geothermal energy resources."

"Geothermal energy can be used for electricity generation, heat pumps, or direct uses. This document focuses only on the traditional, commercially available technologies that produce electricity by exploiting the naturally occurring heat of the earth. Enhanced geothermal systems, which utilize advanced (often experimental) drilling and fluid injection techniques to augment and expand the availability of geothermal resources, are the subject of a separate factsheet (see Climate TechBook: Enhanced Geothermal Systems)."

"Geothermal energy is the heat from the Earth. It's clean and sustainable. Resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the Earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma."