Group items tagged

Motions in nature, for example ocean waves, can play a significant role in tomorrow's electricity production, but the constructions require adaptations to its media. Engineers planning hydropower plants have always taken natural conditions, such as fall height, speed of flow, and geometry, as basic design parameters and constraints in the design

Extensive simulations of the wave energy concept are presented, along with results from the experimental setup of a multisided permanent magnet linear generator. The prototype is designed through systematic electromagnetic field calculations. The experimental results are used for the verification of measurements in the design process of future full-scale direct wave energy converters. The present paper, describes the energy conversion concept from a system perspective, and also discusses the economical and some environmental considerations for the project.

Though our scientists may claim that they are inventing something new by using wind as a source of generating energy, the truth is that wind is being used for centuries for this purpose. An example of this is an article published in 1838, which clearly shows that even in those times, wind was considered an important source of energy. Here are a few quotes that were recorded in the past, which prove that wind was always important in generating energy

Renewable energy production and demand growth is gaining momentum in many ways across the world. There is a booming demand of wind power today and all wind energy equipment manufacturers are gearing up to meet the demand and take advantage of it. Wind power capacity growth will be reaching 447GW in the next five years and by year 2014 end, Asia will lead the world in installed wind capacity.

Yes, the day is not far off when reaching for sky is the new motto for generating cost-effective renewable energy. Initially it was considered to be technically non-viable to tap high-altitude winds. But today, technically-advanced materials and innovative computer know-how are giving new life to this scheme with innovative autonomous aerial structures using wind energy to generate power

We have been harnessing the wind's energy for hundreds of years. From old Holland to farms in the United States, windmills have been used for pumping water or grinding grain. Today, the windmill's modern equivalent - a wind turbine - can use the wind's energy to generate electricity.

Wind turbines, like windmills, are mounted on a tower to capture the most energy. At 100 feet (30 meters) or more aboveground, they can take advantage of the faster and less turbulent wind. Turbines catch the wind's energy with their propeller-like blades. Usually, two or three blades are mounted on a shaft to form a rotor.

A blade acts much like an airplane wing. When the wind blows, a pocket of low-pressure air forms on the downwind side of the blade. The low-pressure air pocket then pulls the blade toward it, causing the rotor to turn. This is called lift. The force of the lift is actually much stronger than the wind's force against the front side of the blade, which is called drag. The combination of lift and drag causes the rotor to spin like a propeller, and the turning shaft spins a generator to make electricity.

Technological developments are continually lowering the material and component cost of fuel cells and production is being ramped up and automated, allowing economies of scale to be realised.

owa ranks 2nd in the nation for wind energy production as there are almost 2,900 utility scale wind turbines in Iowa.  This creates enough electricity to power 1,000,000 homes. Minnesota is fourth in the nation for wind energy production and Wisconsin is 19th.

Advantages of Tidal Energy1)  It is an inexhaustible source of energy. 2)  Tidal energy is environment friendly energy and doesn't produce greenhouse gases. 3)  As 71% of Earth’s surface is covered by water, there is scope to generate this energy on large scale. 4)  We can predict the rise and fall of tides as they follow cyclic fashion. 5) Efficiency of tidal power is far greater as compared to coal, solar or wind energy. Its efficiency is around 80%. 6)  Although cost of construction of tidal power is high but maintenance costs are relatively low. 7)  Tidal Energy doesn’t require any kind of fuel to run. 8)  The life of tidal energy power plant is very long. 9)  The energy density of tidal energy is relatively higher than other renewable energy sources.

Disadvantages of Tidal Energy 1)  Cost of construction of tidal power plant is high. 2)  There are very few ideal locations for construction of plant and they too are localized to coastal regions only. 3)  Intensity of sea waves is unpredictable and there can be damage to power generation units. 4)  Influences aquatic life adversely and can disrupt migration of fish. 5)  The actual generation is for a short period of time. The tides only happen twice a day so electricity can be produced only for that time. 6)  Frozen sea, low or weak tides, straight shorelines, low tidal rise or fall are some of the obstructions. 7)  This technology is still not cost effective and more technological advancements are required to make it commercially viable. 8)  Usually the places where tidal energy is produced are far away from the places where it is consumed. This transmission is expensive and difficult. Tidal Energy is thus a clean source of energy and doesn’t require much land or other resources as in harnessing energy from other sources. However, the energy generated is not much as high and low tides occur only twice a day and continuous energy production is not possible.