Group items tagged

Tidal turbines look like wind turbines. They are arrayed underwater in rows, as in some wind farms. The turbines function best where coastal currents run between 3.6 and 4.9 knots (4 and 5.5 mph). In currents of that speed, a 49.2-foot (15-meter) diameter tidal turbine can generate as much energy as a 197-foot (60-meter) diameter wind turbine. Ideal locations for tidal turbine farms are close to shore in water 65.5–98.5 feet (20–30 meters) deep

Advantages: Geothermal energy cost is extremely low compared to many other energy sources. It has low pollution compared to fossil fuels and nuclear energy. Geothermal energy is a renewable energy source. Almost no environmental impact when using geothermal heat from nuclear decay. Geothermal heat pump systems can reduce your energy use storing heat from the summer/sun and makes use of it in the night and winter. Low maintenance systems.

Disadvantages: The most important disadvantage is absolutely the geological problem.  The heat source is mostly close to volcanic activity of some sort. Chemicals are byproducts of the production electricity with hot ground water. Some geothermal plants use a lot of water and it needs to go somewhere its after use. Some of the poluting chemicals in that water and steam are sulfur, mercury, hydrogen sulfide, arsenic, ammonia. Earth is a changing creature.  A drilled hole in the ground could supply thousands of homes heat and one earthquake could change that in a second.  It can also change gradually over time. Location, location, location.  That is certainly true of geothermal energy.  It cannot be transported over vast distances.  If used to heat up houses or for hot tap water it is only the quality of the pipe that delivers the water that determines how far it can go and if it will be of any use when it arrives. If the heat is used for electrical production it helps to have plants close so the energy loss is not too great. 

Corrosion is a big problem.  Composition of the chemicals can vary but it is always a problem.  It is among other the reason they need to heat up clean water to use and do not use it directly in to heating of houses.  In cases it has been used directly it causes pipes to corrode. In nuclear heating rock the rock cools down over few decades and hundreds of years are needed to get initial heating back.  Power stations of that sort are therefore not considered as profitable. Geothermal Heat pump systems do have high installation cost. Some areas run out of water or run low on ground water during seasonal dry spells. Less water means less heat and less energy to produce. Some drilling sites are too hot to handle.  Yea. Drillers have actually tried and tried some holes and they just can’t get the needed equipment in because the holes shoot it out like guns.   With workers running to stay alive while steel rains down on them. 

Each day the ocean surface rises and falls because of tides. The highest point of the rise is called high tide. The lowest point is called low tide. Most places have two high tides and two low tides each day. Tides happen because of the gravitational pull of the Moon and Sun on ocean water. The Moon has a much greater impact on tides than the Sun because it is much closer. The Moon pulls water that is closest to it making a high tide on the side of the Earth closest to the Moon and there is a high tide on the opposite side of the Earth too. Low tides happen in places between the high tides. Because Earth is rotating, the tides change over time. The difference between high tide and low tide is called the tidal range. The tidal range can be as little as a few centimeters to as much as several meters depending on the shape of the ocean floor. In Canada's Bay of Fundy the tidal range is very large – 16 meters.

Advantages of Tidal Energy1)  It is an inexhaustible source of energy. 2)  Tidal energy is environment friendly energy and doesn't produce greenhouse gases. 3)  As 71% of Earth’s surface is covered by water, there is scope to generate this energy on large scale. 4)  We can predict the rise and fall of tides as they follow cyclic fashion. 5) Efficiency of tidal power is far greater as compared to coal, solar or wind energy. Its efficiency is around 80%. 6)  Although cost of construction of tidal power is high but maintenance costs are relatively low. 7)  Tidal Energy doesn’t require any kind of fuel to run. 8)  The life of tidal energy power plant is very long. 9)  The energy density of tidal energy is relatively higher than other renewable energy sources.

Disadvantages of Tidal Energy 1)  Cost of construction of tidal power plant is high. 2)  There are very few ideal locations for construction of plant and they too are localized to coastal regions only. 3)  Intensity of sea waves is unpredictable and there can be damage to power generation units. 4)  Influences aquatic life adversely and can disrupt migration of fish. 5)  The actual generation is for a short period of time. The tides only happen twice a day so electricity can be produced only for that time. 6)  Frozen sea, low or weak tides, straight shorelines, low tidal rise or fall are some of the obstructions. 7)  This technology is still not cost effective and more technological advancements are required to make it commercially viable. 8)  Usually the places where tidal energy is produced are far away from the places where it is consumed. This transmission is expensive and difficult. Tidal Energy is thus a clean source of energy and doesn’t require much land or other resources as in harnessing energy from other sources. However, the energy generated is not much as high and low tides occur only twice a day and continuous energy production is not possible.

Geothermal energy has been used for thousands of years in some countries for cooking and heating. It is simply power derived from the Earth's internal heat.This thermal energy is contained in the rock and fluids beneath Earth's crust. It can be found from shallow ground to several miles below the surface, and even farther down to the extremely hot molten rock called magma.These underground reservoirs of steam and hot water can be tapped to generate electricity or to heat and cool buildings directly.A geothermal heat pump system can take advantage of the constant temperature of the upper ten feet (three meters) of the Earth's surface to heat a home in the winter, while extracting heat from the building and transferring it back to the relatively cooler ground in the summer

There are three types of geothermal power plants: dry steam, flash, and binary. Dry steam, the oldest geothermal technology, takes steam out of fractures in the ground and uses it to directly drive a turbine. Flash plants pull deep, high-pressure hot water into cooler, low-pressure water. The steam that results from this process is used to drive the turbine. In binary plants, the hot water is passed by a secondary fluid with a much lower boiling point than water. This causes the secondary fluid to turn to vapor, which then drives a turbine. Most geothermal power plants in the future will be binary plants.

It can be extracted without burning a fossil fuel such as coal, gas, or oil. Geothermal fields produce only about one-sixth of the carbon dioxide that a relatively clean natural-gas-fueled power plant produces.

Because waves are erratic, the amount of energy a wave generator can produce is unpredictable and, therefore, cannot be used as a sole reliable energy source.

accidental hydraulic fluid leaks can cause a major environmental problem.

A collision could cause a hydraulic spill or leak and become an environmental hazard.

Wind is the flow of gases on a large scale. On Earth, wind consists of the bulk movement of air. In outer space, solar wind is the movement of gases or charged particles from the sun through space, while planetary wind is the outgassing of light chemical elements from a planet's atmosphere into space. Winds are commonly classified by their spatial scale, their speed, the types of forces that cause them, the regions in which they occur, and their effect. The strongest observed winds on a planet in our solar system occur on Neptune and Saturn.

Winds can shape landforms, via a variety of aeolian processes such as the formation of fertile soils, such as loess, and by erosion. Dust from large deserts can be moved great distances from its source region by the prevailing winds; winds that are accelerated by rough topography and associated with dust outbreaks have been assigned regional names in various parts of the world because of their significant effects on those regions. Wind affects the spread of wildfires. Winds disperse seeds from various plants, enabling the survival and dispersal of those plant species, as well as flying insect populations. When combined with cold temperatures, wind has a negative impact on livestock. Wind affects animals' food stores, as well as their hunting and defensive strategies.

Wind is caused by differences in pressure. When a difference in pressure exists, the air is accelerated from higher to lower pressure. On a rotating planet, the air will be deflected by the Coriolis effect, except exactly on the equator. Globally, the two major driving factors of large-scale winds (the atmospheric circulation) are the differential heating between the equator and the poles (difference in absorption of solar energy leading to buoyancy forces) and the rotation of the planet. Outside the tropics and aloft from frictional effects of the surface, the large-scale winds tend to approach geostrophic balance. Near the Earth's surface, friction causes the wind to be slower than it would be otherwise. Surface friction also causes winds to blow more inward into low pressure areas.

Method Cents/kW-h Limitations and Externalities WindCurrently supplies approximately 1.4% of the global electricity demand. Wind is considered to be about 30% reliable. 4.0 - 6.0 Cents/kW-h Wind is currently the only cost-effective alternative energy method, but has a number of problems. Wind farms are highly subject to lightning strikes, have high mechanical fatigue failure, are limited in size by hub stress, do not function well, if at all, under conditions of heavy rain, icing conditions or very cold climates, and are noisy and cannot be insulated for sound reduction due to their size and subsequent loss of wind velocity and power. GeothermalCurrently supplies approximately 0.23% of the global electricity demand. Geothermal is considered 90-95% reliable. 4.5 - 30 Cents/kW-h New low temperature conversion of heat to electricity is likely to make geothermal substantially more plausible (more shallow drilling possible) and less expensive. Generally, the bigger the plant, the less the cost and cost also depends upon the depth to be drilled and the temperature at the depth. The higher the temperature, the lower the cost per kwh. Cost may also be affect by where the drilling is to take place as concerns distance from the grid and another factor may be the permeability of the rock. HydroCurrently supplies around 19.9% of the global electricity demand. Hydro is considered to be 60% reliable. 5.1 - 11.3 Cents/kW-h Hydro is currently the only source of renewable energy making substantive contributions to global energy demand. Hydro plants, however, can (obviously) only be built in a limited number of places, and can significantly damage aquatic ecosystems. SolarCurrently supplies approximately 0.8% of the global electricity demand. 15 - 30 Cents/kW-h Solar power has been expensive, but soon is expected to drop to as low as 3.5 cents/kW-h. Once the silicon shortage is remedied through alternative materials, a solar energy revolution is expected.

Tide 2 - 5 Cents/kW-h Blue Energy's tidal fence, engineered and ready for implementation, would provide a land bridge (road) while also generating electricity. Environmental impact is low. Tides are highly predictable.

Method Cents/kW-h Limitations and Externalities GasCurrently supplies around 15% of the global electricity demand. 3.9 - 4.4 Cents/kW-h Gas-fired plants and generally quicker and less expensive to build than coal or nuclear, but a relatively high percentage of the cost/KWh is derived from the cost of the fuel. Due to the current (and projected future) upwards trend in gas prices, there is uncertainty around the cost / KWh over the lifetime of plants. Gas burns more cleanly than coal, but the gas itself (largely methane) is a potent greenhouse gas. Some energy conversions to calculate your cost of natural gas per kwh. 100 cubic feet (CCF)~ 1 Therm = 100,000 btu ~ 29.3 kwh. CoalCurrently supplies around 38% of the global electricity demand. 4.8 - 5.5 Cents/kW-h Increasingly difficult to build new coal plants in the developed world, due to environmental requirements governing the plants. Growing concern about coal fired plants in the developing world (China, for instance, imposes less environmental overhead, and has large supplies of high sulphur content coal). The supply of coal is plentiful, but the coal generation method is perceived to make a larger contribution to air pollution than the rest of the methods combined.

Wind speed and direction is a result of high and low pressure areas in the atmosphere.

Ancient Egyptians built places to live that allowed stored energy from the sun during the day, and a heat release during the night. This kind of architecture heated homes at night while keeping the temperature low during the day. Egyptians also used the sun as part of their mummification process, using the sun to dry dead bodies. The Egyptians used a form of passive solar power. 3rd Century B.C., Greek soldiers with the help of Archimedes, focused light on a Roman fleet by using mirrors,

his is somewhat balanced out by long plant lives of 100 years for the actual barrage structure, and 40 for the equipment, as well as low operating costs.

An estimate is given by researcher Eleanor Denny. Denny estimates that in order for a facility to be profitable, its capital cost should be less than €530,000 (~$700,000 USD) per MegaWatt which with the current technology is not a realistic goal, meaning that so far the industry produces negative net benefits.50

Canada's Race Rocks site, where a single turbine generator converts 65 kW of energy, cost $4,000,000.54 This figure was met with $3,000,000 investment from project partner EnCana's Environmental Innovation Fund, and a grant of just under $1 million awarded to Pearson College and their partners in the project.

Biofuels

We are working to produce biofuels that are low cost, low carbon, sustainable and able to fulfil the world’s transportation fuel needs on a large scale without compromising food production

We are working to produce biofuels that are low cost, low carbon, sustainable and able to fulfil the world’s transportation fuel needs on a large scale without compromising food production

Wind power is a renewable resource, which means using it will not deplete the earth's supply of fossil fuels. It also is a clean energy source, and operation does not produce carbon dioxide, sulfur dioxide, mercury, particulates, or any other type of air pollution, as do conventional fossil fuel power sources.

Wind power consumes no fuel for continuing operation, and has no emissions directly related to electricity production.

Wind power's ability to reduce pollution and greenhouse gas emissions will depend on the amount of wind energy produced, and hence scalability.