Group items tagged

One area of concern is how underwater noise generated by the turbines could affect marine mammals that use auditory cues to navigate and communicate with each other.

Solar power Manufacturer Company affects the environment in 3 steps, Production process in the factories goods that are being transported for production Installation process of the panel

When looking at a wind powered electric generator, many people see a permanent source of renewable electricity. The problem with this image is that wind generators have shorter life spans than the term “sustainable” would imply. Wooden windmills in Holland that used to power industrial machinery before the invention of steam engines were more durable than these picket lines of propellers along our Columbia Gorge. The composite material and rare earth chemicals they require are both perishable and costly to replace. More important, like fossil fuels, our planet has a finite supply of these materials. Wind power is such an inefficient means of generating electricity that a world that seriously relied on it the way we do fossil fuels would run out of the limited resources needed to build and maintain them long before our present trends would exhaust our vast bounty of hydrocarbons.

Wind is created when the sun hits the earth. The air above water and the air above the ground heat at different rates. Since the air above the ground heats faster, the warm air from the ground hits the atmosphere first. It then is pushed out toward the sea. As the air heads toward the sea, it gets colder and sinks back down to the sea level. This creates a current pushing the sea air toward the land in the form of wind. The stronger the sun's energy on the land and water, the faster the wind will circulate.

As the gearbox turns, it feeds the RPM into the generator, which transfers the energy into usable electrical energy and stores it. Large cables are attached to the generator that feed the electrical currents from the generators of all the wind turbines on the farm into one electrical storage area. The energy can then be transported through power lines around the area for commercial and home usage.

Where does the first phase for biofuel production begin? The sun takes credit for the very first step in this process. The sun helps to grow crops and plants, which are then eventually used to produce biofuel. Biofuel is actually derived from biomass, which can come from gas, solid and liquid states.

These crops that are specifically grown to be used to produce biofuels are referred to as feedstocks. These feedstocks are the raw and unprocessed form that the bio fuel is derived from. Among the more common types of feedstocks and crops that are used for the production of biofuels are corn, sugar crops, and forests. In addition, even some of the byproducts of materials such as those that come from wood can be used in this process. These special byproducts are often converted to the liquid forms of biofuels, which include methanol and ethanol. With the ability to use these byproducts, production methods have gotten a lot less expensive since there is much less waste involved.

In addition, there are also certain natural oils that are also used to help produce this special type of fuel. For example, oil palm, soybean and algae are surprisingly capable of being burned directly in certain types of furnaces and engines and can also be blended with certain types of fuels or petroleum based fuels for a more powerful blended mixture.

Geothermal power has massive potential in many areas of the U.S. but it has long remained a niche technology.

Advantages: Geothermal energy cost is extremely low compared to many other energy sources. It has low pollution compared to fossil fuels and nuclear energy. Geothermal energy is a renewable energy source. Almost no environmental impact when using geothermal heat from nuclear decay. Geothermal heat pump systems can reduce your energy use storing heat from the summer/sun and makes use of it in the night and winter. Low maintenance systems.

Disadvantages: The most important disadvantage is absolutely the geological problem.  The heat source is mostly close to volcanic activity of some sort. Chemicals are byproducts of the production electricity with hot ground water. Some geothermal plants use a lot of water and it needs to go somewhere its after use. Some of the poluting chemicals in that water and steam are sulfur, mercury, hydrogen sulfide, arsenic, ammonia. Earth is a changing creature.  A drilled hole in the ground could supply thousands of homes heat and one earthquake could change that in a second.  It can also change gradually over time. Location, location, location.  That is certainly true of geothermal energy.  It cannot be transported over vast distances.  If used to heat up houses or for hot tap water it is only the quality of the pipe that delivers the water that determines how far it can go and if it will be of any use when it arrives. If the heat is used for electrical production it helps to have plants close so the energy loss is not too great. 

Corrosion is a big problem.  Composition of the chemicals can vary but it is always a problem.  It is among other the reason they need to heat up clean water to use and do not use it directly in to heating of houses.  In cases it has been used directly it causes pipes to corrode. In nuclear heating rock the rock cools down over few decades and hundreds of years are needed to get initial heating back.  Power stations of that sort are therefore not considered as profitable. Geothermal Heat pump systems do have high installation cost. Some areas run out of water or run low on ground water during seasonal dry spells. Less water means less heat and less energy to produce. Some drilling sites are too hot to handle.  Yea. Drillers have actually tried and tried some holes and they just can’t get the needed equipment in because the holes shoot it out like guns.   With workers running to stay alive while steel rains down on them. 

Alcohol-based biofuels are produced in much the same way as liquor, though, of course with different emphasis. In fact, ethyl alcohol, or ethanol, which is the most commonly used bio-alcohol, is the same type of alcohol that is found in whiskey, vodka, gin, etc.  All of these are based on the fermentation of starches and sugars. The ingredients are gathered, ground up, mixed with water and left to ferment with the help of yeast or other organisms for some period of time (three years for Scotch whiskey!) before it is finally distilled into the final product.

idal turbines are very much like an underwater windmill where the blades are driven by consistent, fast-moving currents.  The submerged rotors harness the power of the tidal streams to drive generators, which in turn produce electricity. Water is 832 times denser than air so consequently tidal turbine rotors can be are much smaller than wind turbine rotors generate equivalent  amounts of electricity, and they can be deployed much closer together. Devices that harness tidal stream energy present a unique set of engineering challenges in terms of design, installation and maintenance. During operation, the force of the tidal flow in Strangford Lough is equivalent to a 345 mph wind generating a 100 tonnes of thrust on the rotors. The unique SeaGen design allows capture of the maximum amount of tidal energy whilst keeping maintenance and connectivity costs low.

Tidal turbines are very much like an underwater windmill where the blades are driven by consistent, fast-moving currents.  The submerged rotors harness the power of the tidal streams to drive generators, which in turn produce electricity. Water is 832 times denser than air so consequently tidal turbine rotors are much smaller than wind turbine rotors generate equivalent  amounts of electricity, and they can be deployed much closer together. Devices that harness tidal stream energy present a unique set of engineering challenges in terms of design, installation and maintenance. During operation, the force of the tidal flow in Strangford Lough is equivalent to a 345 mph wind generating a 100 tonnes of thrust on the rotors.

Biofuels are made with biomass (biological material from living or recently living organisms) there are many kinds, for example biodiesel involves growing crops that contain large amounts of natural oil, these plants then go through a refining process and subsequently are mixed in with regular diesel to power cars. Bio petrol is made in a similar way; plants are refined to make a natural ethanol.

Solar energy does little to harm the environment.

por and a small amou

wind power as a better way to generate electricity than plants fueled by coal, hydro (water) or nuclear power.

Tidal energy is produced through the use of tidal energy generators. These large underwater turbines are placed in areas with high tidal movements, and are designed to capture the kinetic motion of the ebbing and surging of ocean tides in order to produce electricity. Tidal power has great potential for future power and electricity generation because of the massive size of the oceans. These articles explore the potential energy of tidal power technologies.

It will generate one of the most environmentally-friendly forms of energy - it makes no noise