Group items tagged

The fuel cell will compete with many other energy­ conversion devices, including the gas turbine in your city's power plant, the gasoline engine in your car and the battery in your laptop. Combustion engines like the turbine and the gasoline engine burn fuels and use the pressure created by the expansion of the gases to do mechanical work. Batteries convert chemical energy back into electrical energy when needed. Fuel cells should do both tasks more efficiently.

The U.S. consumes a little more than 20 million barrels of oil a day. The largest end uses are motor gasoline (9 million barrels) and diesel (4 million barrels). That works out to about 140 billion gallons of gasoline and 60 billion gallons of diesel a year. In 2006, the U.S. consumed nearly 5.4 billion gallons of ethanol, 12 percent of which was imported. Adjusting for its lower energy content, that amounted to about 2.5% of the total U.S. demand for gasoline. Biodiesel consumption was much lower, about 250 million gallons in 2006.

The U.S. consumes a little more than 20 million barrels of oil a day. The largest end uses are motor gasoline (9 million barrels) and diesel (4 million barrels). That works out to about 140 billion gallons of gasoline and 60 billion gallons of diesel a year. In 2006, the U.S. consumed nearly 5.4 billion gallons of ethanol, 12 percent of which was imported. Adjusting for its lower energy content, that amounted to about 2.5% of the total U.S. demand for gasoline. Biodiesel consumption was much lower, about 250 million gallons in 2006. In the Energy

The U.S. consumes a little more than 20 million barrels of oil a day. The largest end uses are motor gasoline (9 million barrels) and diesel (4 million barrels). That works out to about 140 billion gallons of gasoline and 60 billion gallons of diesel a year. In 2006, the U.S. consumed nearly 5.4 billion gallons of ethanol, 12 percent of which was imported. Adjusting for its lower energy content, that amounted to about 2.5% of the total U.S. demand for gasoline. Biodiesel consumption was much lower, about 250 million gallons in 2006. In the Energy Policy Act of 2005, Congress enacted the Renewable Fuels Standard, which requires an annual increase in biofuels use to 7.5 billion gallons by 2012. The chart above details past levels of U.S. ethanol production and the minimum levels set by the Renewable Fuels Standard. In the 2006 State of the Union address, President Bush announced a goal of replacing “more than 75% of our oil imports from the Middle East by 2025.” According to the Department of Energy, meeting that goal will require 60 billion gallons of biofuels a year. A year later, the President accelerated the timetable and called for “20 in 10.”

Just as solar, hydro and biomass energy has been utilized for thousands of years, hydrogen technology as a fuel source has also been known for over 150 years.

Hydrogen is a simple element - an atom with only one proton and one electron. It is also the most plentiful element in the universe. Despite its simplicity and abundance, hydrogen doesn't occur naturally as a gas on the Earth - it is always combined with other elements.

Water, for example, is a combination of hydrogen and oxygen. Hydrogen can be separated from hydrocarbons by applying heat, a process known as "reforming" hydrogen.

One of the first applications for fuel cells based on their advantageous properties was in the US space program.

Compared to IC engines, fuel cells have practically no polluting exhaust like NOx and sulphides.

It is generally acknowledged that the feasibility and durability of fuel cells in automobiles has been proven. The major focus now is on cost reduction

The best known early fuel cell experiments were performed in 1842 by the British physicist and lawyer, Sir William R. Grove (1811-1896)

Due to easily accessible and large amounts of oil and the invention of the combustion engine (Carl Friedrich Benz and Gottlieb Daimler), fuel cells were forgotten until the middle of the 20th century. In the US Apollo space programme, fuel cells exhibited their first renaissance in the 1960’s. 

Fuel cell development has been slowed down by a fear of hydrogen as a fuel. It is commonly believed that hydrogen is an extremely explosive and dangerous gas. Most of this belief was founded in 1937, when the hydrogen-filled zeppelin “Hindenburg” caught fire and crashed in Lakehurst, USA.

Waves are generated by wind passing over the surface of the sea. As long as the waves propagate slower than the wind speed just above the waves, there is an energy transfer from the wind to the waves.

The first known patent to utilize energy from ocean waves dates back to 1799 and was filed in Paris by Girard and his son.[12] An early application of wave power was a device constructed around 1910 by Bochaux-Praceique to light and power his house at Royan, near Bordeaux in France

Once the wave energy is captured at a wave source, power must be carried to the point of use or to a connection to the electrical grid by transmission power cables.[2

The PV effect was discovered in 1954, when scientists at Bell Telephone discovered that silicon (an element found in sand) created an electric charge when exposed to sunlight.

The Sun heats our atmosphere unevenly, so some patches become warmer than others. These warm patches of air rise, other air blows in to replace them - and we feel a wind blowing. We can use the energy in the wind by building a tall tower, with a large propellor on the top. The wind blows the propellor round, which turns a generator to produce electricity.

he best places for wind farms are in coastal areas, at the tops of rounded hills, open plains and gaps in mountains - places where the wind is strong and reliable. Some are offshore.

The best places for wind farms are in coastal areas, at the tops of rounded hills, open plains and gaps in mountains - places where the wind is strong and reliable. Some are offshore.

Geothermal Basics What Is Geothermal Energy? The word geothermal comes from the Greek words geo (earth) and therme (heat). So, geothermal energy is heat from within the Earth. We can recover this heat as steam or hot water and use it to heat buildings or generate electricity. Geothermal energy is a renewable energy source because the heat is continuously produced inside the Earth.

Geothermal energy is generated in the Earth's core. Temperatures hotter than the sun's surface are continuously produced inside the Earth by the slow decay of radioactive particles, a process that happens in all rocks. The Earth has a number of different layers:

Where Geothermal Energy is Found The ring of fire goes around the edges of the Pacific. The map shows that volcanic activity occurs around the Pacific rim.Source: National Energy Education Development Project (Public Domain) Naturally occurring large areas of hydrothermal resources are called geothermal reservoirs. Most geothermal reservoirs are deep underground with no visible clues showing above ground. But geothermal energy sometimes finds its way to the surface in the form of: Volcanoes and fumaroles (holes where volcanic gases are released) Hot springs Geysers

The first tidal power station was the Rance tidal power plant built over a period of 6 years from 1960 to 1966 at La Rance, France.[8] It has 240 MW installed capacity.

Historically, tide mills have been used, both in Europe and on the Atlantic coast of North America. The incoming water was contained in large storage ponds, and as the tide went out, it turned waterwheels that used the mechanical power it produced to mill grain. [1] The earliest occurrences date from the Middle Ages, or even from Roman times.[2][3] It was only in the 19th century that the process of using falling water and spinning turbines to create electricity was introduced in the U.S. and Europe.[

Solar energy, radiant light and heat from the sun

radiant light and heat from the sun,

Another benefit of condition monitoring is that it allows condition-based maintenance. Instead of replacing components after fixed time intervals based on empirical values, they can be replaced only when required, such as when signs of wear are detected.

90 years ago - in 1921 Albert Einstein was awarded a Nobel Prize for explanation of the PV-effect. 70 years ago - in 1941, the first silicon monocrystalline solar cell was constructed. 60 years ago - in 1951, the first germanium solar cells have been made.

1958, the same company introduced a solar cell with 9 % efficiency. The first radiation-proof silicon solar cell was produced for the purposes of space technology in the same year. On 17th March, the first satellite powered by solar cells, Vanguard I, was launched. The system ran continuously for 8 years.

The Life-cycle greenhouse-gas emissions of solar power are in the range of 22 to 46  g/kWh depending on if solar thermal or solar PV is being analyzed, respectively. With this potentially being decreased to 15 g/kWh in the future.[71] For comparison (of weighted averages), a combined cycle gas-fired power plant emits some 400-599 g/kWh,

Tidal energy has been used since about the 11th Century, when small dams were built along ocean estuaries and small streams. the tidal water behind these dams was used to turn water wheels to mill grains.

A solar cell is any device that directly converts the energy in light into electrical energy through the process of photovoltaics. The development of solar cell technology begins with the 1839 research of French physicist Antoine-César Becquerel. Becquerel observed the photovoltaic effect while experimenting with a solid electrode in an electrolyte solution when he saw a voltage develope when light fell upon the electrode.

It was used in the watermills along the shores of England during the Roman age and also used along the shores of France and Spain. This period was around 900 AD. The water rising from the tides was impounded in barrages and it was allowed to flow through waterwheels and other energy capturing devices thus capturing the energy and converting it into useful work used to grind grains and produce flour. The first tidal mill in the US was built in Salem, MA in 1635.

Since 1998, the Pelamis development programme has covered all aspects of the design from the fundamental concept refinement through to accelerated cycle testing of individual components for reliability.

During the first phase of Pelamis development prior to full-scale operations in 2004, extensive numerical modelling and analysis and a range of technology demonstration models at different scales were used to understand survival characteristics in extreme waves and verify the accuracy of our simulations

Though our scientists may claim that they are inventing something new by using wind as a source of generating energy, the truth is that wind is being used for centuries for this purpose. An example of this is an article published in 1838, which clearly shows that even in those times, wind was considered an important source of energy. Here are a few quotes that were recorded in the past, which prove that wind was always important in generating energy

Renewable energy production and demand growth is gaining momentum in many ways across the world. There is a booming demand of wind power today and all wind energy equipment manufacturers are gearing up to meet the demand and take advantage of it. Wind power capacity growth will be reaching 447GW in the next five years and by year 2014 end, Asia will lead the world in installed wind capacity.

Yes, the day is not far off when reaching for sky is the new motto for generating cost-effective renewable energy. Initially it was considered to be technically non-viable to tap high-altitude winds. But today, technically-advanced materials and innovative computer know-how are giving new life to this scheme with innovative autonomous aerial structures using wind energy to generate power