Group items tagged

Galletto 1260 is an easy hardware for auto chip tunning. Working on EDC16, EDC15, MEx.x, DELCO and many more engine4s ECU. It is compatible with the newest modern diesel TDi, HDi, JTD, and petrol cars.

D80D0WQ ERASER Programmer was used to read, program, and erase incremental registersEEPROM, compatible with Windows 98/2000/XP.

This CMD CAN Flasher V1251 read and write flash memory via the diagnostic connector on the CAN line of computers with motor MED9.1, MED9.5, EDC16U3x/CP, EDC16CP31, EDC16CP36, EDC16C3 and EDC16C9 fuel injection. Working through CAN and not working for K line.

The memory for SPI 28 software and data is implemented as a programmable component into ECU for a long time now. Ever since these components are erasable even as an assembled part of the ECU more and more vehicle manufacturers chose to provide the possibility to re-load/replace the software and data contents of the respective control unit in addition to the analysis and error detection mechanisms.

KWP 2000 Plus ECU REMAP Flasher Tuning Tool can read and analyze current ECU software, upgrade the ECU software with a re-mapped file, and repair ECUS with software problems or corruption.

This device is intended for computers on the cars flashing by OBDII connector or directly connecting to the ECU the car.

M35080V6 EEPROM ERASER/PROGRAMMER was been used to read, program, erase Incremental RegistersEEPROM, it is easy to use windows XP/2000/98 software.