Group items tagged

The emerging category of "green" electronics has captured consumers' attention in the past year. They are beginning to understand the various environmental and health impacts of the plethora of devices they interact with on a daily basis, according to research from the Natural Marketing Institute. Consumers are most anxious that their devices are difficult to recycle, but their concern differs by device, with almost 60 percent of consumers concerned that televisions are difficult to recycle, and only slightly over 40 percent of consumers stating that phones are difficult to recycle, according to the 2008 LOHAS Consumer Trends Database.

The Center for Environmental Health (CEH) Pollution Prevention Program works to leverage the buying power of large institutions in order to expand the market for "greener" electronic products that encourages the development of a sustainable, socially responsible production system in the electronics sector. Currently the Pollution Prevention Program is focused on the health care sector, partnering with the Health Care Without Harm (HCWH) campaign, to encourage SF Bay Area hospitals and national health care organizations to adopt more environmentally preferable purchasing, management and disposal practices for their electronic equipment. CEH also provides purchasing assistance to institutions from other sectors such as government and private industry, partnering with other coalitions such as the Electronics TakeBack Coalition (ETBC). CEH integrates the resources and expertise of ETBC in electronics with the experience and knowledge of HCWH in procurement in order to influence the purchasing decisions of large institutions in healthcare, government and academia towards more environmentally responsible electronics. Contact Sue Chiang, Pollution Prevention Program Director, 510.655.3900 x311, sue[at]cehca.org or Judy Levin, Pollution Prevention Program Coordinator, 510.655.3900 x316, judy[at]cehca.org with any questions.

Hewlett Packard (HP), in collaboration with the Global Digital Solidarity Fund (DSF), and the Swiss Federal Laboratories for Materials Testing and Research (Empa), has launched a groundbreaking initiative to develop sustainable recycling processes to tackle the problem of e-waste in Africa. For the past two years, the initiative has been overseeing a pilot program facility in South Africa and conducting e-waste management assessment studies in both Kenya and Morocco; the goal of the assessments is ultimately to properly determine each country's ability to deal with the e-waste there, whether it arose from electronics that were purchased new within the country and are now reaching their end of life, or from electronics that were shipped illegally from other countries. The project has been examining efforts by both African governments and organizations to safely handle e-waste. The project has been compiling extensive information, such as the policy and legal framework in each country, standard settings for e-waste treatment, organizations and programs already in place to safely process e-waste, and the actual amounts of e-waste present. MediaGlobal article by Shefali Lall, 7/20/09.

"The DfE Computer Display Partnership, along with the electronics industry, evaluated the life-cycle environmental impacts, performance, and cost of technologies that are used in desktop computer monitors-namely, cathode ray tubes (CRT) and liquid crystal displays (LCD).This project generated data to assist original equipment manufacturers (OEMs) and suppliers in the electronics field in incorporating environmental considerations into their decision-making processes and identify areas for improvement. This project combined both the Life-Cycle Assessment (LCA) and the Cleaner Technologies Substitutes Assessment (CTSA) approaches to analyze the environmental impacts, performance, and cost of both CRT and LCD desktop monitors. These evaluations will help the electronics industry: consider alternative technologies, materials, and processes that reduce releases of toxic chemicals, conserve resources, and lower risks to human health and the environment; perform an improvement assessment of display technologies and their components; and meet the growing global demands for 'extended product responsibility.'" Site includes general project information, findings & accomplishments, publications and a list of partners.

"The DfE Printed Wiring Board (PWB) Partnership encouraged the use of technologies that improve both environmental performance and competitiveness of the PWB industry. Traditional methods for manufacturing PWBs: Use toxic chemicals, such as formaldehyde, that pose potential health and environmental risks; Use substantial amounts of water and energy;Generate large volumes of hazardous waste. The DfE Program partners, including the national PWB trade association, have examined alternative technologies that reduce or eliminate these impacts." Site includes general project information, findings & accomplishments, publications, and a list of partners.

Trash Track relies on the development of smart tags, which will be attached to different types of garbage in order to track in real time each piece of waste as it traverses the city's sanitation system. The goal of the project is to reveal the disposal process of our everyday objects and waste, as well as to highlight potential inefficiencies in today's recycling and sanitation systems. The project will be exhibited at the Architectural League in New York City and in Seattle starting September 2009. MIT SENSEable City Lab project; this is the project web site.

7/15/09. Article on Trash Track, a project of the MIT SENSEable City lab that uses microprocessors to track the movement of various types of waste through an urban waste stream for the analysis of patterns and assessment of disposal costs. Seattle, WA and NYC are pilot projects in the U.S.; tracking will also occur in London, England in the U.K.

FRONTLINE/World presents a global investigation into the dirty secret of the digital age-the dumping of hundreds of millions of pounds of electronic waste around the world each year. Airs Tuesday, June 23, 2009 at 8pm central on PBS.

This analysis relies primarily on market research data on sales of electronic products. It then applies these sales data to some of the most comprehensive collection information available to estimate product lifespans and the amounts of particular products that are ready for EOL management. From these EOL estimates, we subtract the estimated quantity recycled to yield the quantity disposed. This approach also provides information on the export of CRT monitors and TVs, as well as the amount of selected electronics cumulatively in storage.

Text of the pending Wisconsin e-waste law. This bill passed the WI Senate and arrived in the Assembly Tuesday, 6/16/09. Would require manufacturers of select consumer electronics (computers, printers and video display devices, such as TVs or monitors) to collect and recycle 80 percent of the weight of sold devices beginning in September. Beginning in February 2010, retailers can't sell electronics made by manufacturers that are not registered with WDNR. Manufacturers failing to meet their targets would be subject to a shortfall fee after 2010. Those who exceed their goals may be eligible for recycling credits. (Summary of bill taken from related article in GreenerComputing, 6/16/09.)

Indiana law signed 5/13/09. Manufacturers of video display devices, such as TVs, computer monitors and laptops, must recycle 60 percent by weight of their sales of those products. They are required to register with the state by April 2010 and must include a plan describing how they will meet their recycling targets. They can count the recycling of other electronics, such as printers, keyboards and VCRs, toward their recycling goals. Manufacturers must report their progress at the end of each program year for state review. In the third year, the state will impose penalties for noncompliance.

Public Act 95-0959 became the law of the State of Illinois in September 2008. The law establishes a statewide system for recycling and/or reusing computers, monitors, televisions, and printers discarded from residences by requiring electronic manufacturers and retailers to participate in the management of discarded and unwanted electronic products.

This document reports on an LCA study of PCs, according to the terms of reference described in Technical Annex XI.E.4/96/0056 of the Commission's call for tenders and on pp 12-14 of Atlantic/IPU's tender for the project, which was distributed to the PC ad hoc working group on 21 January, 1997.

Approach Two relies primarily on government statistics on sales of electronic products. It then uses the same lifespan data (with some modifications) as Approach One to estimate EOL quantities. From these EOL estimates, we subtract the quantity of selected electronics disposed to yield the quantity recycled. This approach also provides information on the composition of electronic products, as well as the number of select electronic devices entering storage/reuse annually.

New and pending regulations requiring product take-back by manufacturers at the time of disposal are intended to create a new era of industrial ecology and environmental sustainability. However, the intended benefits of the current legislation can be confounded by obsolescence in product design based upon advances in science and technology and also by the introduction of more environmentally benign product designs.

American Plastics Council paper presented at Society of Plastics Engineers Annual Recycling Conference, November 2000; authors Michael M. Fisher, American Plastics Council, Michael B. Biddle, MBA Polymers, Inc., Tony Hainault, Minnesota Office of Environmental Assistance, Douglas S. Smith, Sony Electronics Inc., David J. Cauchi, Consultant, David A. Thompson, Matsushita Electric Corporation of America

Describes the results of an investigation by the Office of the Inspector General (OIG) into the health, safety, and environmental compliance practices of Federal Prison Industries' (FPI) electronic waste (ewaste) recycling program.

"Discarded electronic products and components - or e-waste, as they are collectively known - can represent either a major environmental dilemma or a massive potential economic windfall. If treated properly, much e-waste may be reclaimed or recycled for future use and converted into a significant new revenue stream. Improperly treated e-waste, on the other hand, poses a massive threat to the world's ecosystem and can result in contamination to the soil, air, and water, while also exposing workers, nearby residents, and wildlife to a multitude of health hazards. This study forecasts that the worldwide market for e-waste recovery will grow from $5.7 billion in 2009 to nearly $14.7 billion by the end of 2014, representing a CAGR of 20.8% over the forecast period. This figure represents money generated through reclamation of valuable materials from e-scrap."

BAN's Mission: "BAN works to prevent the globalization of the toxic chemical crisis. We work in opposition to toxic trade in toxic wastes, toxic products and toxic technologies, that are exported from rich to poorer countries. Alternatively, we work to ensure national self-sufficiency in waste management through clean production and toxics use reductions and in support of the principle of global environmental justice -- where no peoples or environments are dispro-portionately poisoned and polluted due to the dictates of unbridled market forces and trade."

"EPA's DfE Program and the Massachusetts Toxics Use Reduction Institute (TURI) entered into a voluntary partnership with representatives of the wire and cable industry to evaluate the environmental impacts of the current standard material formulations and alternative formulations. Specifically, the partnership used a life-cycle assessment approach to examine the impacts of heat stabilizers, polymer systems and flame retardants used in insulation and jacketing for selected wire and cable products. This information will address the information gap on the environmental impacts of the different materials used in wire and cable insulation, and help companies make environmentally sound product and material choices."