Group items tagged

Today's FPGAs are doubling in capacity every 2 years and have already surpassed the 5 million equivalent ASIC gate mark. With designs of this magnitude, the need for fast flows has never been greater. At the same time, designers are seeking rapid feedback on their ASIC or FPGA designs by implementing quick prototypes or initial designs on FPGA-based boards. These prototypes or designs allow designers to start development, verification and debug of the design—in the context of system software and hardware—and also to fine tune algorithms in the design architecture. Quick and intuitive debug iterations to incorporate fixes are of great value. The ability to perform design updates that don't completely uproot all parts of the design that have already been verified is also a bonus! Whether the goal is aggressive performance or to get a working initial design or prototype on the board as quickly as possible, this paper provides information on traditional and new techniques that accelerate design and debug iterations.

NXP BV (Eindhoven, The Netherlands) has said it will demonstrate a microcontroller based on the ARM Cortex-M4 at the Embedded Systems Conference in San Jose, California. NXP was one of the first companies to license the Cortex-M4 processor core and a chip has been implemented using a low-leakage 90-nm process technology. This enables performance in excess of 150-MHz clock frequency, NXP said. NXP has added proprietary power-down techniques to reduce power consumption. The ESC Silicon Valley demo will show that a 7-channel audio graphic equalizer application processing 32-bit precision audio data requires only 12 MHz of CPU bandwidth using the Cortex-M4 DSP extensions, and 60 MIPs without. The core includes DSP extensions not usually found inside a microcontroller and NXP's implementation are aimed at a broad set of applications including motor control, digital power control and embedded audio.

Predicting trends is difficult even by the most connected industry experts, but one trend that's easy to spot is the widespread acceptance of multicore SoC. This is happening for a number of reasons. First, it's been years since the workstation first adopted the multicore processor architecture to solve such issues as increasing performance and power concerns. While the adoption rate in workstations is now saturated and is fully supported by General Purpose OSs (GPOS), the embedded world is just now looking at ways to adopt multicore architecture. Second, several SoC vendors have been providing multicore solutions including Cavium, Freescale, MIPS, and ARM; but up until now, these solutions have been limited to networking and used for performance enhancements rather than for low power. The rest of the embedded industry has had limited hardware options available as low-power design is a driving factor. While the ARM 11 MPCore was ahead of its time, the Cortex-A9 MPCore design is ready for primetime and is gaining acceptance in the embedded marketplace. As a result, SoC vendors have adopted the Cortex-A9 MPCore hardware as a basis for their next generation designs. Over a year ago, Texas Instruments pre-announced their next-generation OMAP designs in the OMAP 4 with a dual-core Cortex-A9 MPCore, scheduled for production in the second-half of 2010. ST Microsystems has pre-announced their next generation consumer devices which will be based on the Cortex A9 MPCore.

Tiny semiconductor dots could lead to a new type of circuit based on magnetism rather than current flow. At least that’s the hope of researchers who’ve made the dots and are hoping to build them into a workable device. ”We want to make it into a so-called nonvolatile transistor,” says Kang Wang, head of the Device Research Laboratory at the University of California, Los Angeles. Such a ”spintronic” transistor would retain its logic state in the absence of current and require less power to switch a bit, reducing the electrical power required by a computer chip by as much as 99 percent. Wang’s research, supported in part by Intel, was published in March in the online version of Nature Materials. Where electronic transistors rely on the presence or absence of current to register the ones and zeros of digital logic, spintronic transistors depend on ”spin,” a quantum characteristic of the electron. Picture the electron as a rotating globe. When the north pole is pointing upward, that’s spin up; when pointing the other way, it’s spin down. When the spins of most electrons are aligned, the material is magnetic. When their spins are random, the material isn’t. An applied current can align or randomize the spins, allowing for spin-based switches.

STMicroelectronics has the STM8S Discovery kit for around US$7. For that little bit of money you get an 8 bit CPU with a detachable USB programming/debugging board and 32k of flash, 2k of RAM, and 1K of EEPROM. Downloadable tools include demo C compilers from a variety of third party vendors (limited to 16k, if I'm reading the literature correctly).

From multicore to many-core to hard-to-describe-in-a-single-word core

During the Google IO event, two new great features of the popular Android OS were announced. The most important from a robotics point of view is the Android Open Accessory standard that is Arduino based and enables Android devices to integrate with hardware via usb (or bluetooth in the near future). You can read more in the posts on engadget.com and robots-dreams.com (where the video is from). Also engadget reports on the Android @ Home framework that aspires to interconnect every home appliance, device or gadget to an integrated network. More information and details will be announced soon from Google but already the potential for various robotic applications that could take advantage of these projects looks promising.