Group items tagged

aims at developing swarms of flying robots that can be deployed in disaster areas to rapidly create communication networks for rescuers. Flying robots are interesting for such applications because they are fast, can easily overcome difficult terrain, and benefit from line-of-sight communication.

Getting oil out of water isn’t that hard, on principle. What is hard is getting a huge amount of oil out of an even huger amount of water. If you think about it, this is really a perfect task for a swarm of robots, since it’s simple and repeatable and just needs to be done over and over (and over and over and over) again. With this in mind, MIT’s Senseable City Lab has created Seaswarm, a swarm of networked oil spill cleanup robots:

The Robotics Developer Studio (RDS) Simulator is a key feature of the package that allows you to get started without buying expensive robots. It is a great tool for use in education. The add-ons outlined below help you to create your own simulation environments and get started on learning about robotics.

You can think of the Distributed Flight Array as a combination between vertical take-off and landing vehicles, and modular reconfigurable robots. It is a flying platform consisting of multiple, autonomous, single-propeller vehicles, and these single propeller vehicles - or modules - are able to generate enough thrust to lift themselves into the air, but are completely unstable in flight, kind of like a helicopter without a tail rotor.

Scientists from Bielefeld University have come up with a plastic-head robot called Flobi that can express a number of different emotions, and can have it’s appearance reassembled from male to female (or vice-versa) in a couple of minutes.

Robot motion planning has traditionally been used to avoid collisions when moving a robot arm. Avoiding collisions is important, but many other desirable criteria are often ignored. For example, motions that minimize energy will let the robot extend its battery life. Smoother trajectories may cause less wear on motors and can be more aesthetically appealing. There may be even more useful criteria, like keeping a glass of water upright when moving it around. This summer, Mrinal Kalakrishnan from the Computational Learning and Motor Control Lab at USC worked on a new motion planner called STOMP, which stands for "Stochastic Trajectory Optimization for Motion Planning". This planner can plan paths for high-dimensional robotic systems that are collision-free, smooth, and can simultaneously satisfy task constraints, minimize energy consumption, or optimize other arbitrary criteria. STOMP is derived from gradient-free optimization and path integral reinforcement learning techniques (Policy Improvement with Path Integrals, Theodorou et al, 2010).

UC3M's ASIROV Robotic Satellite Chaser Prototype ASIROV, the Acoplamiento y Agarre de Satélites mediante Sistemas Robóticos basado en Visión (Docking and Capture of Satellites through computer vision) would use computer vision tech to autonomously chase down satellites in orbit for repair or removal. Image courtesy of Universidad Carlos III de Madrid Spanish robotics engineers have devised a new weapon in the battle against zombie-sats and space junk: an automated robotics system that employs computer vision technology and algorithmic wizardry to allow unmanned space vehicles to autonomously chase down, capture, and even repair satellites in orbit. Scientists at the Universidad Carlos III de Madrid (UC3M) created the system to allow for the removal of rogue satellites from low earth orbit or the maintenance of satellites that are nearing the ends of their lives, prolonging their service (and extending the value of large investments in satellite tech). Through a complex set of algorithms, space vehicles known as “chasers” could be placed into orbit with the mission of policing LEO, chasing down satellites that are damaged or have gone “zombie” and dealing with them appropriately.

Events such as natural disasters, military actions, and public safety threats have led to an increased need for robust robots — especially ones that can travel across complex terrain in any dimension. The ability to scale vertical building surfaces or other structures offers unique capabilities in military applications such as urban reconnaissance, sensor deployment, and setting up urban network nodes. SRI's novel clamping technology, called compliant electroadhesion, has enabled the first application of this technology to wall-climbing robots that can help with these situations.  As the name implies, electroadhesion is an electrically controllable adhesion technology. It involves inducing electrostatic charges on a wall substrate using a power supply connected to compliant pads situated on the moving robot. SRI has demonstrated robust clamping to common building materials including glass, wood, metal, concrete, etc. with clamping pressures in the range of 0.5 to 1.5 N per square cm of clamp (0.8 to 2.3 pounds per square inch). The technology works on conductive and non-conductive substrates, smooth or rough materials, and through dust and debris. Unlike conventional adhesives or dry adhesives, the electroadhesion can be modulated or turned off for mobility or cleaning. The technology uses a very small amount of power (on the order of 20 microwatts/Newton weight held) and shows the ability to repeatably clamp to wall substrates that are heavily covered in dust or other debris.

Continuing to work on a humanoid helper robot called ARMAR, the Collaborative Research Center 588: Humanoid Robots at the University of Karlsruhe began planning ARMAR-IIIa (blue) in 2006. It has 43 degrees of freedom (torso x3, 2 arms x7, 2 hands x8, head x7) and is equipped with position, velocity, and force sensors.  The upper-body has a modular design based on the average dimensions of a person, with 14 tactile sensors per hand.  Like the previous versions, it moves on a mobile platform.  In 2008 they built a slightly upgraded version of the robot called ARMAR-IIIb (red).  Both robots use the Karlsruhe Humanoid Head, which has 2 cameras per eye (for near and far vision).  The head has a total of 7 degrees of freedom (neck x4, eyes x3), 6 microphones, and a 6D inertial sensor.

You may think that all of those crazy robot competitions that we like to cover are just fun and games, but there’s a serious side. Really, there is. For reals. Mindful of this, ROBO-ONE held the second annual Humanoid Helper Project last weekend, where teleoperated human-sized robots completed (or attempted to complete) three seemingly simple tasks, including pouring liquid from a plastic bottle into a cup, carrying ping-pong balls on a tray, and a 30 minute endurance race. I don’t know about you, but the last two would be a bit of a challenge for me, and they certainly were for the robots:

In what comes as a bit of a surprise, Fuji Soft Inc.’s new humanoid robot platform for hobbyists and researchers has been given the name PALRO (pal + robot).  Naturally we feel this name is a superb choice!  Sales to research institutions will begin on March 15th, 2010 with a general release following later in the year.  The robot combines Fuji Soft’s software prowess with an open architecture which will give developers plenty of room to experiment. PALRO stands 39.8cm (15″) tall and weighs 1.9kg (3.5 lbs), and here’s the good news: it costs 298,000 JPY ($3300 USD).  Considering PALRO has 20 DOF, a camera, 4 directional microphones, a speaker, LED arrays in its head and chest, 4 pressure sensors in each foot, 3-axis gyro sensor, an accelerometer, and an Intel Atom 1.6GHz CPU, it is priced very competitively.  A comparative robot kit like Vstone’s Robovie-PC for example, costs $1100 USD more and doesn’t have such a fancy exoskeleton.

Commenter Cynox was browsing through the 137 years of Popular Science magazine which are now available online, and he noticed this robot in the September 1984 issue. Called Odex I, it was developed by a (now apparently defunct) company called Odetics. Odex was six and a half feet tall, had six legs, and was fully capable of walking. Although it only weighed 370 pounds, each of its legs could lift 400 pounds. It could dead lift some 2100 pounds, and carry 900 pounds while walking at normal speed (which was about 18 inches per second). Odex used a tripod gait, and the fishbowl thing on top contained sensors that helped it avoid obstacles. It was one of the first robots with an onboard computer that helped coordinate all of its limbs. Since the limbs could articulate themselves in several directions independently, Odex was able to rapidly change its limb configuration to squeeze through tight spaces, move quickly, or lift stuff. It was able to climb into the back of a truck through a combination of automated step behaviors and teleoperation, which was pretty damn good for 1984.

The animal world has been a source of inspiration for many robotic designs as of late, as who better to ask about life-like movements than mother Nature herself? Up until now, though, these designs had been mostly focused on small critters, like cockroaches, and simulating properties such as adaptability and speed. But what happens when we start looking at bigger and stronger animals? Like, say, an elephant? Well, Festo’s Bionic Handling Assistant is what happens. This innovation might seem like just another robotic arm at first glance, but the video demonstrates quite vividly how this design is such a big improvement over previous versions. Modeled after the elephant’s mighty trunk, this arm possesses great dexterity, flexibility and strength; operating with smooth, yet firm motions, and can pick up and move any kind of object from one place to another. It’s FinGripper fingers give it “an unparalleled mass/payload ratio”, and it has no problem twisting, assembling and disassembling things, such as the experimental toy in the video.

Until now you can have big elaborate robots or very small microbots but it is very difficult to have both. A blog post from New Scientist (where this video is from) points out the research on microbots, very small machines that will move, navigate and perform simple tasks. The ability to remotely power a microbot, thus eliminating the need for onboard battery or fuel, is already proven and one of the methods is the application of an AC field to a liquid where the robot is located. This microbot is essentially a diode, a one-way electric conductor. The different electric charges at its ends force the neighboring ions to move thus creating a small thrust that propels the bot. The team of Rachita Sharma and Orlin Velev from North Carolina State University developed a method where a controlled application of an additional DC field changes the ion distribution around the microbot and this time the ion field creates a torque that rotates the microbot. The DC field is applied until the completion of a 180-degree turn. Then the microbot moves again, now in the opposite direction. It is only 1.3mm long and as claimed by other scientists like Vesselin Paunov from the University of Hull, UK this arrangement can be further scaled down where it can be useful for diagnostic and localized drug supply applications.

A new form of propulsion that could allow microrobots to explore human bodies has been discovered. The technique would be used to power robots and other devices such as microfluidic pumps from a distance. Finding a propulsion mechanism that works on the microscopic scale is one of the key challenges for developing microrobots. Another is to find a way to supply such a device with energy because there is so little room to carry on-board fuel or batteries. Now a team lead by Orlin Velev at North Carolina State University in Raleigh, US, has found that a simple electronic diode could overcome both these problems. Velev and Vesselin Paunov from the University of Hull, UK, floated a diode in a tank of salt water and zapped the set-up with an alternating electric field.

A new form of propulsion that could allow microrobots to explore human bodies has been discovered. The technique would be used to power robots and other devices such as microfluidic pumps from a distance. Finding a propulsion mechanism that works on the microscopic scale is one of the key challenges for developing microrobots. Another is to find a way to supply such a device with energy because there is so little room to carry on-board fuel or batteries. Now a team lead by Orlin Velev at North Carolina State University in Raleigh, US, has found that a simple electronic diode could overcome both these problems. Velev and Vesselin Paunov from the University of Hull, UK, floated a diode in a tank of salt water and zapped the set-up with an alternating electric field.

You might think that some devices in the modern age have reached their maximum development level, such as the common desk-lamp, but you would be wrong. Natan Linder, a student from The Massachusetts Institute of Technology (MIT) has created a robotic version that can not only light your room, but project internet pages on your desk as well. It is an upgrade on the AUR lamp from 2007, which tracks movements around a desk or table and can alter the color, focus, and strength of its light to suit the user’s needs. The LuminAR comes with those abilities, and much more. The robotic arm can move about on its own, and combines a vision system with a pico projector, wireless computer and camera. When turned on, the projector will look for a flat space around your room on which to display images. Since it can project more than one internet window, you can check your email and browse another website at the same time.

The science behind gecko toes holds the answer to a dry adhesive that provides an ideal grip for robot feet. Stanford mechanical engineer Mark Cutkosky is using the new material, based on the structure of a gecko foot, to keep his robots climbing.

A research project will be conducted this week in Linz, Austria, to discover what the ideal interaction between people and humanoid robots ought to be in the future, Honda R&D and Ars Electronica Futurelab announced today. The research, the first of its kind in Europe, will involve members of the public directly interacting with ASIMO, Honda's humanoid robot.

Honda and the Ars Electronica Futurelab are collaborating on a human-robot interaction study this week in Linz, Austria (September 2nd ~ 8th).  Although they say their goal is to determine how robots ought to interact with people in the future, I think this may be just an excuse to let the public have some one-on-one fun with ASIMO.  In any case, these sorts of studies should help steer Honda’s engineers in the right direction when designing the next version of the world’s most famous humanoid robot.

Bipedal humanoid robots can step over obstacles and negotiate stairs where their wheeled counterparts cannot, but this comes with the risk of falling down.  Naturally, humanoid robots will never be accepted in society if they break when they fall down.  The bigger the robot, the more likely it is that it will damage itself during a fall and be unable to get up. In 2003 the HRP-2P was the first full-scale humanoid that could fall over safely and get back up, and so far remains alone; not even Honda’s ASIMO can do this.  As soon as it detected that it was falling, the HRP-2P would bend its knees and back, which helped to reduce the ground impact.  This motion, called “UKEMI”, is quite similar to how the SONY QRIO would react when falling over to reduce the risk of damaging its components.